• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.593-599
• /
• 2013

In this paper, the GPS cycle-slip detection for carrier-phase based positioning of land vehicle is presented. For the carrier phase based positioning, cycle-slip detection is necessary to get the reliability of positioning result. There exists many cycle-slip detection algorithms, but we detect the cycle-slip by using the monitoring value which is defined as residual between the carrier phase measurement and estimated value from low-cost inertial sensor. To achieve goal of paper, low-cost cycle-slip detection system, permissible specification region of inertial sensor is derived. By using the result of permissible region, appropriate inertial sensor of cycle-slip detection can be decided, proper cost and proper specification. To verify the result of this paper, we conduct the rate table test. As a result, required cycle-slip detection performance is satisfied conservatively.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.10-17
• /
• 2013

This thesis proposes an automatic embedded core generator system that supports branch prediction. The proposed system includes a dynamic branch prediction module that enhances execution speed of target applications by inserting history/direction flags into BTAC(Branch Target Address Cache). Entries of BHT(Branch History Table) and BTAC are determined based on branch informations extracted by simulation. To verify the effectiveness of the proposed branch prediction module, ARM9TDMI core including a dynamic branch predictor was described in SMDL and generated. Experimental results show that as the number of entry rises, area increase up to 60% while application execution cycle and BTAC miss rate drop by an average of 1.7% and 9.6%, respectively.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.24-34
• /
• 2001

IP address lookup is a major bottleneck of IP packet processing in high speed router. Existing IP lookup methods are focused only on lookup throughput without considering lookup table update. So their slow update can lead to lookup blocking or wrong routing decision based on obsolete routes. Especially existing IP lookup methods based on CAM(content addressable memory) have slow update of O(n) cycles in spite of their high throughput and low area complexity In this paper we proposes a new IP address lookup method based on pipelined CAM architecture(PICAM) with fast update of O(1) cycle of lookup table and high throughput and low area complexity.

• Journal of information and communication convergence engineering
• /
• v.20 no.4
• /
• pp.250-258
• /
• 2022

The emerging scope of the Internet-of-Things (IoT) has piqued the interest of industry and academia in recent times. Therefore, security becomes the main issue to prevent the possibility of cyberattacks. Jamming attacks are threads that can affect performance and cause significant problems for IoT device. This study explores a smart jamming attack (coalition attack) in which the attackers were previously a part of the legitimate network and are now back to attack it based on the gained knowledge. These attackers regroup into a coalition and begin exchanging information about the legitimate network to launch attacks based on the gained knowledge. Our system enables jammer nodes to select the optimal transmission rates for attacks based on the attack probability table, which contains the most probable link transmission rate between nodes in the legitimate network. The table is updated constantly throughout the life cycle of the coalition. The simulation results show that a coalition of jammers can cause highly successful attacks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.581-590
• /
• 2003

This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.266-278
• /
• 2012

The objective of this study was developing dynamic stand growth model to predict diameter at breast height (DBH) growth by thinning intensity and cycle for major tree species of South Korea. The yield table, one of static stand growth models, constructed by Korea Forest Service was employed to prepare dynamic stand growth models for 8 tree species. In the process of model development, the thinning type was designated to thinning from below and equations for predicting the DBH change after thinning by different intensities was generated. In addition, stand density (N/ha), age and site index were adopted as explanatory variables for DBH prediction model. Thereafter, using the model, DBH growth under various silvicuture through integrating such equations considering thinning intensities, and cycles. The dynamic stand growth model of DBH developed in this study can provide understanding of effectiveness in forest growth and growing stock when thinning practice is performed in forest. Furthermore, results of this study is also applicable to quantitatively assess the carbon storage sequestration capability.

• Journal of Embryo Transfer
• /
• v.27 no.4
• /
• pp.265-270
• /
• 2012

In canine, oocytes are ovulated at the GV (germinal vesicle) stage and they have to fulfill maturation phase before reaching metaphase II stage. The efficiency of in vitro maturation is still very low. Therefore, the aim of this study was to investigate the effect of in vitro maturation on nuclear changes of immature canine oocytes recovered from different reproductive stages ovaries and different culture conditions. The oocytes were cultured in TCM-199 with supplement at 5% $CO_2$ and $38.5^{\circ}C$ for 72 h. The nuclear maturation of canine oocytes was evaluated with Hoechst 33342 stain under fluorescence microscope (Fig. 1). The results of this study detected differences in in vitro maturation rate between oocytes recovered from follicle status and non-follicle status ovaries. However, these differences were not significant as indicated in Table 1 and Fig. 2. In regard to the effect of culture condition with supplements, we did not found significant differences compared with control group (Table 2, Table 3). One of the reasons for this data could be the conditions that ovaries were exposed during slaughtering process or the long distant transportation of the ovaries. Although these data have not shown clearly significant differences results compared with control, furthermore the different reproductive status ovaries was beneficial for maturation of oocytes in vitro and can be a basic part of knowledge to improve in vitro maturation of canine oocytes.

• The Journal of Society for e-Business Studies
• /
• v.9 no.4
• /
• pp.117-136
• /
• 2004

As the time-to-market gets more important for competitiveness of an enterprise in manufacturing industry, it becomes important to shorten the development cycle of a product. Reuse of existing design models and e-Catalog for components are required for faster product development. To achieve this goal, an electric catalog must provide parametric CAD models since parametric information is indispensable for configuration design. There are difficulties in building up a parametric library of all the necessary combination using a CAD system, since we have too many combinations of components for a product. For example, there are at least 80 million combinations of components on one page of paper catalog of a mold base. To solve this problem, we propose the method of table parametric for the automatic generation of parametric CAD models. Any combination of mold base can be generated by mapping between a classification system of an electric catalog and the design parameters set of the table parametric. We propose how to select parametric models and to construct the design parameters set.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3208-3229
• /
• 2017

Rectification is an essential procedure for simplifying the disparity extraction of stereo matching algorithms by removing vertical mismatches between left and right images. To support real-time stereo matching, studies have introduced several look-up table (LUT)- and computational logic (CL)-based rectification approaches. However, to support high-resolution images, the LUT-based approach requires considerable memory resources, and the CL-based approach requires numerous hardware resources for its circuit implementation. Thus, this paper proposes a multi-level accumulation-based rectification method as a simple CL-based method and its circuit implementation. The proposed method, which includes distortion correction, reduces addition operations by 29%, and removes multiplication operations by replacing the complex matrix computations and high-degree polynomial calculations of the conventional rectification with simple multi-level accumulations. The proposed rectification circuit can rectify $1,280{\times}720$ stereo images at a frame rate of 135 fps at a clock frequency of 125 MHz. Because the circuit is fully pipelined, it continuously generates a pair of left and right rectified pixels every cycle after 13-cycle latency plus initial image buffering time. Experimental results show that the proposed method requires significantly fewer hardware resources than the conventional method while the differences between the results of the proposed and conventional full rectifications are negligible.