• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(A)
• /
• pp.283-284
• /
• 2010

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.139-141
• /
• 2006

내장형 프로세서인 SE3208의 소프트웨어 모델을 개발하고 SimpleScalar 도구 모음에 추가하여 SE3208 프로세서를 위한 시뮬레이터를 개발하였다. 소프트웨어 모델은 Simplescalar 도구의 환경에 맞춰 함수를 재사용하는 방법으로 작성되었으며, 3단 단일 파이프라인을 갖는 SE3208을 cycle단위로 시뮬레이션 할 수 있도록 시뮬레이터를 변경하였다. 동일한 프로그램을 SE3208 소프트웨어 모델과 PC 상에서 각각 실행시켜 그 결과를 비교함으로써 개발된 시뮬레이터의 정확성을 검증하였으며. 다양한 방식과 모드의 시뮬레이션 기능을 검증하고 성능을 비교하였다.

• 항공우주시스템공학회지
• /
• 제14권1호
• /
• pp.16-20
• /
• 2020

차량이 주행 중에 그리고 항공기가 활주로에 착륙하는 순간과 활주 중에 발생하는 피로는 착륙장치, 기체와 차량의 현가장치 등에 수명 주기와 밀접한 관련이 있다. 휠에 작용하는 하중들은 종축 힘, 횡력, 수직력과 제동력이다. 차량의 동특성과 내구성을 연구하기 위해 본 논문의 시뮬레이터는 시험실에서 실제 노면 형상을 재현에 사용된다. 그러므로 제품 개발 시간과 비용을 절감할 수 있다. 하드웨어적으로 유압 피로 시뮬레이터 구조의 중요한 요소는 각 축을 분리하고 여러 하중과 진동을 견뎌내는 것이다. 본 논문의 역기구학적 해석 방법은 Dummy wheel 중심에서 축 방향으로 최대 동작 변위를 준 후 커플링에 의한 유압 서보 작동기의 작동 크기를 도출한다. 해석의 결과는 실제 노면 형상을 정확하게 재현하기 위해 축 간의 커플링이 미약함을 확인하는 것이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.235-241
• /
• 1998

Flow characteristics of a compressible gas flow through a rotating disc-type rotary valve are investigated experimentally under various conditions. It is known that the mass flow rate through poppet valves of 4-stroke cycle engines and through piston valves of 2-stroke cycle engines decrease with increase in engine speed. Rotary valve is one means by which air maybe made to flow intermittently through a pipe. In this paper a exhaust system simulator of engine was used to experimentally analyzer the decrease inflow rate at high rotation speeds and to determine what variables, other than rotational speed, give rise to the observed behaviour. These variables have been included in an empirical equation which is representative of the measured flow characteristics.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.150-152
• /
• 2003

This simulation was carried out to estimate the process time and to improve the operation efficiency. The subassembly process consists of piece arrangement, tack welding, robot welding, manual welding and the robot welding of them was the focus of the simulation. Robot welding stage was analyzed by UML and IDEFø method, and then it was represented as the three-dimensional model(simulator) based on the analysis. The output of this simulation was the cycle time for one day's work. The cycle time for the different torch and the different piece arrangement was investigated by the 3-dimensional simulation.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.196-198
• /
• 2006

Shader architecture is one of the fastest growing fields in the ever advancing 3D graphics, and massive amounts of Ideas and technologies are being introduced to the market continuously. In this paper, we present a flexible cycle-accurate simulation environment to accelerate and alleviate the process of developing and verifying these ideas and technologies. Combination of 3D graphics API and hardware simulator allows OpenGL applications to be emulated off-the-shelf for a given shader micro-architecture. Easily modified parameters allow the simulation environment to be tailored to specific demands or requirements.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 춘계학술발표 개요집
• /
• pp.91-93
• /
• 1995

A study was made to examine the effects of post-weld heat treatment (PWHT) on the toughness and microstructures in the weld heat-affacted zone(HAZ) of Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulate the weld HAZ. The behavior of Cu-precipitates in HAZ is similar to that in base plate. PWHT at 55$0^{\circ}C$ shows highest hardness and lowest toughness, whereas PWHT at $650^{\circ}C$ shows reasonable toughness. Cu precipitated during agcing for increasing the strength of base metal is dissolved during single thermal cycle to 135$0^{\circ}C$ and is precipitated little on cooling and heating during subsequent weld thermal cycle. It precipitates by introducing PWHT.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.55-64
• /
• 1995

A study was made to examine the effects of postweld heat treatment(PWHT) on the toughness and microstructures in the weld heat affected zone(HAZ) of Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulate the weld HAZ. The details between toughness and PWHT of HAZ were studied by impact test, optical microscopy(O.M.), scanning electron microscopy (SEM), transmission electron microscopy(TEM) and differential scanning calorimetry(DSC). The decrease of HAZ toughness in single thermal cycle comparing to base plate is ascribed to the coarsed-grain formed by heating to 1350.deg.C. The increase of HAZ toughness in double thermal cycle comparine to single thermal cycle is due to the fine ferrite(.alpha.) grain transformed from austenite(.gamma.)formed by heating to .alpha./.gamma. two phase region. Cu precipitated during aging for increasing the strength of base metal is dissolved during single thermal cycle to 1350.deg.C and is precipitated little on cooling and heating during subsequent weld thermal cycle. It precipitates by introducing PWHT. Thus, the decrease of toughness in triple thermal cycle of $T_{p1}$ = 1350.deg.C, $T_{p2}$ = 800.deg.C and $T_{p3}$ = 500.deg.C does not occur owing to the precipitation of Cu. The behaviors of Cu=precipitates in HAZ is similar to that in base plate. PWHT at 550.deg.C shows highest hardness and lowest toughness, whereas PWHT at 650.deg.C shows reasonable toughness, which improves the toughness of as-welded state.state.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.180-190
• /
• 2005

The PSA cycle was performed for the separation of binary gas mixture $H_2/Ar$ (80%/20%) using the six-step two-bed process. Adsorption equilibrium contains a LRC model for equilibrium adsorption isotherms and a LDF model for mass transfer. Aspen ADSIM, simulator was applied to predict the separation performance. The effect of cycle parameters such as feed rate, adsorption pressure and P/F ratio on the separation of hydrogen has been studied in experiment and simulation. In the results, maximize the recovery of hydrogen as a high purity was 13LPM feed flowrate, 120sec adsorption time, 11atm adsorption pressure and 0.1 P/F ratio in a cyclic steady-state come out since 10th cycle.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.169-176
• /
• 2011

The two-step water splitting thermochemical cycle is composed of the T-R (Thermal Reduction)and W-D (Water Decomposition)steps. The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010, 2011). The validation results show that the foam device, when loaded with $NiFe_2O_4/m-ZrO_2$powder, was successfully achieved hydrogen production with 9 (10 with a Xe-light solar simulator, 2009, Kodama et al.) repeated cycles under field conditions. Two foam device used in this study were tested for validation before an experiment was performed. The lab scale ferrite-conversion rate was in the range of 24~76%. Two foam devices were designed to for structural stability in this study. In the results of the experiments, the hydrogen percentage of the weight of each foam device was 7.194 and $9.954{\mu}mol\;g^{-1}$ onaverage, and the conversion rates 4.49~29.97 and 2.55~58.83%, respectively.