• Title/Summary/Keyword: Cycle ratio

Search Result 1,580, Processing Time 0.025 seconds

Effects of Vertical Alignment of Leg on the Knee Trajectory and Pedal Force during Pedaling

  • Kim, Daehyeok;Seo, Jeongwoo;Yang, Seungtae;Kang, DongWon;Choi, Jinseung;Kim, Jinhyun;Tack, Gyerae
    • Korean Journal of Applied Biomechanics
    • /
    • v.26 no.3
    • /
    • pp.303-308
    • /
    • 2016
  • Objective: This study evaluated the vertical and horizontal forces in the frontal plane acting on a pedal due to the vertical alignment of the lower limbs. Method: Seven male subjects (age: $25.3{\pm} 0.8years$, height: $175.4{\pm}4.7cm$, weight: $74.7{\pm}14.2kg$, foot size: $262.9{\pm}7.6mm$) participated in two 2-minute cycle pedaling tests, with the same load and cadence (60 revolutions per minute) across all subjects. The subject's saddle height was determined by the height when the knee was at $25^{\circ}$ flexion when the pedal crank was at the 6 o'clock position (knee angle method). The horizontal force acting on the pedal, vertical force acting on the pedal in the frontal plane, ratio of the two forces, and knee range of motion in the frontal plane were calculated for four pedaling phases (phase 1: $330{\sim}30^{\circ}$, phase 2: $30{\sim}150^{\circ}$, phase 3: $150{\sim}210^{\circ}$, phase 4: $210{\sim}330^{\circ}$) and the complete pedaling cycle. Results: The range of motion of the knee in the frontal plane was decreased, and the ratio of vertical force to horizontal force and overall pedal force in the complete cycle were increased after vertical alignment. Conclusion: The ratio of vertical force to horizontal force in the frontal plane may be used as an injury prevention index of the lower limb.

Optimal Design of Fuel-Rich Gas Generator for Liquid Rocket Engine (액체로켓의 농후 가스발생기 최적설계)

  • Kwon, Sun-Tak;Lee, Chang-Jin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.32 no.5
    • /
    • pp.91-96
    • /
    • 2004
  • An optimal design of the gas generator for Liquid Rocket Engine (LRE) was conducted. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton in thrust with RP-1/LOx propellant. The optimal design was done for maximizing specific impulse of thrust chamber with constraints of combustion temperature and for matching the power requirement of turbopump system. Design variables are total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design provide length, diameter, and contraction ratio of gas generator. And the operational condition predicted by design code with resulting configuration was found to maximize the objective function and to meet the design constraints. The results of optimal design will be tested and verified with combustion experiments.

Gonadal Development and Reproductive Cycle of the Ark shell Scapharca subcrenata (Bivalvia: Arcidae) from Yeoja Bay (여자만 새꼬막 Scapharca subcrenata의 생식소 발달과 생식주기)

  • Kim, Sung-Yeon;Shin, Yun-Kyung;Lim, Han-Kue;Lee, Won-Chan
    • Journal of Aquaculture
    • /
    • v.21 no.4
    • /
    • pp.252-258
    • /
    • 2008
  • Gonadal development and reproductive cycle of the ark shell Scarpharca subcrenata were investigated by histological observations. Samples were collected monthly from March 2007 to February 2008 in the Yeoja Bay, Yeosu, Jeollanam-do, Korea. S. subcrenata was dioecious. The gonads consist of a number of oogenic follicle and acinus. Monthly changes in the gonad index reached a maximum in June and a minimum in September. Monthly changes in the condition index reached a maximum in April and a minimum in September. The reproductive cycle of this species can be divided into five successive stages: early active stage (January to April), late active stage (March to June), ripe stage (May to August), spent stage (July to September) and recovery and resting stage (September to March). The main spawning of S. subcrenata occurred in July and August in Yeoja Bay. The sex ratio of female to male was not significantly different from 1:1.

Gonad Development and Reproductive Cycle of the Purplish Washington Clam, Saxidomus purpuratus (Bivalvia: Veneridae) from Gangjin Bay (강진만 개조개, Saxidomus purpuratus의 생식소 발달과 생식주기)

  • Shin, Yun-Kyung;Choi, Nack-Joong;Oh, Bong-Se;Jung, Ae-Jin;Kim, Sung-Yeon
    • The Korean Journal of Malacology
    • /
    • v.23 no.2
    • /
    • pp.165-172
    • /
    • 2007
  • Gonadal development, reproductive cycle and sex ratio of the purplish Washington clam, Saxidomus purpuratus were investigated monthly by histological observations. Samples were collected from May 2006 to April 2007 in the Gangjin Bay of Namhea, Gyeongsangnam-do, Korea. The clams are dioecious. The gonads consist of a number of oogenic follicle and acinus. Monthly changes in the gonad index reached a maximum in April and a minimum in July. Monthly changes in the condition index reached a maximum in June and a minimum in November. The reproductive cycle of this species can be divided into five successive stages: the recovery and resting stage (June to December), early active stage (January to April), late active stage (February to July), ripe stage (March to October), spent stage (April to October). The main spawning of the clam occurred in July and September in Gangjin Bay. The sex ratio of female to male was not significantly different from 1:1.

  • PDF

A Study on Engine Performance at the Intake Air Compensation by Supercharging in the Low Speed Diesel-Atkinson Cycle (과급에 의한 흡입공기 보상 시 저속 디젤-아트킨슨사이클에서 엔진성능에 대한 연구)

  • Jang, Tae-Ik
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.8
    • /
    • pp.1009-1015
    • /
    • 2011
  • In this study, in the high expansion cycle was conduced by variable valve timing system composition to close intake valve late, and in the intake air reduction on the low compression was solved by supercharging pressure. In this wise, by constituting Diesel-Atkinson cycle, this study looked into a possibility of thermal efficiency improvement. As a result, there was improvement in thermal efficiency and output in a whole range of closing timing from ABDC $40^{\circ}$ to ABDC $80^{\circ}$. However, after ABDC $70^{\circ}$ of closing timing, the thermal efficiency increase was getting smaller. As the result of the study, the optimum intake valve closing timing was about ABDC $70^{\circ}$, high loading territory of engine was more effective than low loading territory, and engine operation in middle loading territory was stable. At this time, brake thermal efficiency was 12.5% higher than ordinary engine on average.

Operation Mode in Sequencing Batch Reactor for Nitrogen Removal (질소제거를 위한 연속회분식 반응조의 운전방식 연구)

  • Shin, Hang Sik;Kwon, Joong Chun;Koo, Ja Kong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.8 no.2
    • /
    • pp.77-88
    • /
    • 1988
  • This research investigated the effect of COD/N ratio on nitrogen removal, and the use of organics in raw wastewater as a carbon source for denitrification in SBR(Sequencing Batch Reactor) systems. Four laboratory scale reactors were operated in three modes. Only the difference between modes were; Mode I operated in aerated condition during fill while Mode II in anoxic condition and Mode III operated on two fills per cycle in anoxic condition. When COD/N ratio increased, total nitrogen removal efficiencies increased from 8.7 to 57.7 percent in Mode I, from 28.9 to 83.2 percent in Mode II and from 42.7 to 97.8 percent in Mode III, respectively. COD removal efficiencies ranged from 93 to 98 percent throughout the study. SBR operation in Mode III of feeding twice per cycle in anoxic condition was an effective operating method for nitrogen removal and nitrogen concentration in effluent can be estimated using influent COD and nitrogen concentrations.

  • PDF

Gonadal Development and Reproductive Cycle of the Granular Ark Tegillarca granosa (Bivalvia: Arcidae) (꼬막 Tegillarca granosa의 생식소 발달과 생식주기)

  • Kim, Sung-Yeon;Moon, Tae-Seok;Shin, Yun-Kyung;Park, Mi-Seon
    • Journal of Aquaculture
    • /
    • v.22 no.1
    • /
    • pp.34-41
    • /
    • 2009
  • Gonadal development and reproductive cycle of the granular ark Tegillarca granosa were investigated by histological observations. Samples were collected monthly from January to Decemberry 2002 in the Yeoja Bay of Yeosu, Jeollanam-do, Korea. T. granosa was dioecious. The gonads consist of a number of oogenic follicle and acinus. Monthly changes in the gonad index reached a maximum in June and a minimum in August. Monthly changes in the condition index reached a maximum in July and a minimum in September. The reproductive cycle of this species can be divided into five successive stages: early active stage (March to May), late active stage (April to June), ripe stage (May to July), spent stage (July to August) and recovery and resting stage (September to March). The spawning of T. granosa occurred in July and August in Yeoja Bay. The sex ratio of female to male was not significantly different from 1:1.

Digitally Current Controlled DC-DC Switching Converters Using an Adjacent Cycle Sampling Strategy

  • Wei, Tingcun;Wang, Yulin;Li, Feng;Chen, Nan;Wang, Jia
    • Journal of Power Electronics
    • /
    • v.16 no.1
    • /
    • pp.227-237
    • /
    • 2016
  • A novel digital current control strategy for digitally controlled DC-DC switching converters, referred to as Adjacent Cycle Sampling (ACS), is proposed in this paper. For the ACS current control strategy, the available time interval from sampling the current to updating the duty ratio, is approximately one switching cycle. In addition, it is independent of the duty ratio. As a result, the contradiction between the processing speed of the hardware and the transient response speed can be effectively relaxed by using the ACS current control strategy. For digitally controlled buck DC-DC switching converters with trailing-edge modulation, digital current control algorithms with the ACS control strategy are derived for three different control objectives. These objectives are the valley, average, and peak inductor currents. In addition, the sub-harmonic oscillations of the above current control algorithms are analyzed and eliminated by using the digital slope compensation (DSC) method. Experimental results based on a FPGA are given, which verify the theoretical analysis results very well. It can be concluded that the ACS control has a faster transient response speed than the time delay control, and that its requirements for hardware processing speed can be reduced when compared with the deadbeat control. Therefore, it promises to be one of the key technologies for high-frequency DC-DC switching converters.

Reproductive Cycle of Sulf clam, Coecella chinensis (Mesodesmatidae: Bivalvia) (퇴조개, Coecella chinensis (Mesodesmatidae: Bivalvia)의 생식주기)

  • Kim, Jin Hee;Son, Min Ho;Kang, Hee-Woong;Lee, Ki-Young
    • The Korean Journal of Malacology
    • /
    • v.29 no.2
    • /
    • pp.113-120
    • /
    • 2013
  • The reproductive cycle, gonad index, condition index, and the sex ratio in female and male Coecella chinensis, which were collected from the coastal waters of Namhae, the South Coast of Korea, were investigated by histological analysis and morphometric data. Monthly variations of the gonad index and condition index of this species showed similar patterns to that of the reproductive cycle. The reproductive cycle in female and male C. chinensis can be classified into six successive stages: early active stage (April), late active stage (May), ripe stage (June), partially spawned/spent stage (June to August), degeneration stage (August) and inactive stage (September to March). According to monthly changes in relative frequency distributions of ovarian egg diameters of this species, in particular, a number of ripe eggs ranging about 70 ${\mu}m$ appear in June, however, in July and August, although the mode of egg diameters ranging about 50 ${\mu}m$ appear about 80%, these ripe eggs ranging from 60 ${\mu}m$ to 70 ${\mu}m$ are gradually decreased during the period from June to August. Therefore, the spawning period of this species is continued from June to August with a peak between July and August when the seawater temperature exceeds about $24.5^{\circ}C$. The sex ratio of female and male individuals was not significantly different from 1:1 (${\chi}^2$=1.20, p>0.05). No hermaphrodites were found.

Precipitation of Rare Earth Chlorides in a LiC-KCl Eutectic Molten Salt (LiCl-KCl 공융염 내에서 희토류염화물들의 침전)

  • Cho, Yung-Zun;Yang, Hee-Chul;Eun, Hee-Chul;Kim, Eung-Ho;Kim, In-Tae
    • Applied Chemistry for Engineering
    • /
    • v.18 no.4
    • /
    • pp.361-365
    • /
    • 2007
  • The precipitation reaction of some rare earth chlorides ($Ce/Nd/GdCl_3$) in a LiCl-KCl molten salt has been carried out by reaction with oxygen. Identification of rare earth precipitates by reaction with oxygen and effects of oxygen sparging time (max. 420 min) and molten salt temperature ($450{\sim}750^{\circ}C$) on conversion were investigated. In this study, regardless of the oxygen sparging time and the molten salt temperature, oxychlorides (REOCl) for $NdCl_3$ and $GdCl_3$, and an oxide ($REO_2$) for $CeCl_3$ are formed as a precipitate, which are identical with the estimation results of Gibbs free energy of reaction (${\Delta}G_r$). The conversion of rare-earth chlorides into insoluble precipitates was described by using a conversion ratio. The conversion ratio increased exponentially with the oxygen sparging time and finally showed asymptotic value, over 0.999 at $750^{\circ}C$ of the molten salt temperature and over 300 min of sparging time conditions. The conversion ratios were increased with the molten salt temperature. In case of $CeCl_3$, when the sparging time exceed 60 min, the values of the conversion ratio were nearly constant over 0.999 in all experimental temperature conditions.