Browse > Article
http://dx.doi.org/10.5916/jkosme.2011.35.8.1009

A Study on Engine Performance at the Intake Air Compensation by Supercharging in the Low Speed Diesel-Atkinson Cycle  

Jang, Tae-Ik (한라대학교 기계자동차공학부)
Abstract
In this study, in the high expansion cycle was conduced by variable valve timing system composition to close intake valve late, and in the intake air reduction on the low compression was solved by supercharging pressure. In this wise, by constituting Diesel-Atkinson cycle, this study looked into a possibility of thermal efficiency improvement. As a result, there was improvement in thermal efficiency and output in a whole range of closing timing from ABDC $40^{\circ}$ to ABDC $80^{\circ}$. However, after ABDC $70^{\circ}$ of closing timing, the thermal efficiency increase was getting smaller. As the result of the study, the optimum intake valve closing timing was about ABDC $70^{\circ}$, high loading territory of engine was more effective than low loading territory, and engine operation in middle loading territory was stable. At this time, brake thermal efficiency was 12.5% higher than ordinary engine on average.
Keywords
Diesel-Atkinson cycle; Supercharging pressure; High expansion; Engine loading; Expansion-compression ratio; Effective compression ratio;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 장태익, 정양주, 노기철, 이종태, "디젤-아트킨슨 사이클의 고팽창법 강구를 위한 연구(I)", 한국자동차공학회 춘계학술대회 논문집II, pp. 500-506. 2002.   과학기술학회마을
2 장태익, 정양주, 이종태, "대형 롱스트로크 디젤 기관의 아트킨슨사이클화에 관한 연구", 한국자동차공학회 춘계학술대회 논문집II, pp. 225-231. 2001.
3 Naoharu Ueda, Hiroshi Sakai, Junso Sasaki, and Naohide Iso, "The Miller cycle gasoline engine for a light duty truck", Joural of the Japan Society of Automotive Engineering, vol. 33, 9633027.
4 C. M. Chung, J. T. Lee, J. W. Cho, "Trends in technical & development of miller cycle for gasoline engine", Journal of Korea Society of Automotive Engineers, vol. 17, no.1. 1995.   과학기술학회마을
5 Ryo Shimizu, Masaki Fujii, Takasi Suzuki, Masao Inoue, "Miller cycle engine management system and its distinctive feature", Joural of the Japan Society of Automotive Engineers Review, pp. 305-308, 1994.
6 T. Goto, et al., "Development of V6 Miller Cycle Gasoline Engine", SAE 940198.
7 W.L.R. Gallo, "Thermodynamic Evaluation of Valve Timing", SAE 921479.
8 T. I. Jang, "A Study on the cycle analyzing and intake valve control by the miller method with a high expansion into low-speed diesel engine", Joural of the Korean society of Marine Engineering, vol. 33, no. 8, pp. 26-32. 2009.
9 T. I. Jang, "A Study on the problem-solving method and thermal efficiency properties at the time of high expansion realization in a 4-cycle diesel engine", Joural of the korean society of Marine Engineering, vol. 33, no. 6, pp. 51-58. 2009.
10 I. Jang, "A study on the theory analysis and engine test performance by a high expansion diesel engine into intake-exhaust consideration", Joural of the korean society of Marine Engineering, vol. 32, no. 8, pp. 55-60. 2008.