• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.37-37
• /
• 2009

Due to their high corrosion resistance and improved mechanical properties super-duplex stainless steel (SDSS) are extensively used in petrochemical plants such as facilities in modern oil platform and off-shore process equipment. It is well known that the best mechanical and corrosion resistance properties of super-duplex stainless steel are obtained with a microstructure having approximately equal amounts of austenite and ferrite. And it is also known that sigma($\sigma$), chi($\chi$), secondary austenite(${\gamma}2$), chromium carbides and nitride affected adversely their properties. Therefore these phases must be avoided. However, effects of succeeding weld thermal cycle on the change of microstructure of weldment at multi-pass weld were not seldom experimentally researched. Therefore in the present work, the change of weldmetal microstructure and the effect of microstructure on pitting corrosion property at $40^{\circ}C$ by succeeding each weld thermal cycle were researched. The thermal history of root side was measured experimentally and the change of microstructure of root weld according to thermal cycle of each weld layer was evaluated. And the relationship between microstructure of root weld and pitting corrosion property at $40^{\circ}C$ was also investigated. Results of the present work are show as below. 1. The ferrite contents of root weld are gradually reduced by succeeding weld thermal cycle. 2. The 2nd phases such as sigma($\sigma$), chi($\chi$), secondary austenite(${\gamma}2$), chromium carbides and nitride are increased gradually by succeeding weld thermal cycle. 3. The pitting corrosion was detected in root weld part and weight loss by pitting corrosion is increased in proportional to the time exposed over $600^{\circ}C$ of the root weld. 4. The succeeding weld thermal cycles affect the microstructure of the former weldments and promote the formation of 2nd phases. That is, the more succeeding welds are added, the more 2nd phases are gradually increased. Consequently, it is thougth that this adversely affects pitting corrosion property.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.27-37
• /
• 2017

In this study, an artificial solar simulator composed of a 2.5 kW Xe-Arc lamp and mirror reflector was used to carry out the solar thermal two step thermochemical water decomposition cycle which can produce high efficiency continuous hydrogen production. Through various operating conditions, the change of hydrogen production due to the possibility of a dual-zone reactor and heat recovery were experimentally analyzed. Based on the reaction temperature of Thermal-Reduction step and Water-Decomposition step at $1,400^{\circ}C$ and $1,000^{\circ}C$ respectively, the hydrogen production decreased by 23.2% under the power off condition, and as a result of experiments using heat recovery technology, the hydrogen production increased by 33.8%. Therefore, when a thermochemical two-step water decomposition cycle is conducted using a dual-zone reactor with heat recovery, it is expected that the cycle can be operated twice over a certain period of time and the hydrogen production amount is increased by at least 53.5% compared to a single reactor.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.329-334
• /
• 2019

Sn-Cu alloy powders were prepared via a simple chemical reduction method for the negative electrode materials in lithiumion batteries. The addition of Cu can suppress the growth of Sn particles during synthetic process. Furthermore, the Cu also acts as a matrix phase against the volume change during cycling. With increasing amount of the Cu, a stable $Cu_6Sn_5$ phase formed in the Sn-Cu alloy and its cycle performance greatly enhanced depending on the Cu content. To promote the generation of the $Cu_6Sn_5$ phase, the synthesis temperature is raised to $60-100^{\circ}C$ from the ambient temperature. The Sn-Cu alloy powders prepared at elevated temperatures showed remarkable cycle performances. The Sn-Cu alloy powder obtained at $60^{\circ}C$ exhibited a significantly high volumetric capacity of over 2,000 mAh/cc at the 50th cycle.

• 한국기후변화학회지
• /
• 제7권4호
• /
• pp.433-442
• /
• 2016

In this study, we examine future changes in surface radiation associated with cloud amount and aerosol emission over East Asia. Data in this study is HadGEM2-CC (Hadley Centre Global Environmental Model version 2, Carbon Cycle) simulations of the Representative Concentration Pathways (RCPs) 2.6/4.5/8.5. Results show that temperature and precipitation increase with rising of the atmosphere $CO_2$. At the end of $21^{st}$ century (2070~2099) relative to the end of $20^{st}$ century (1981~2005), changes in temperature and precipitation rate are expected to increase by $+1.85^{\circ}C/+6.6%$ for RCP2.6, $+3.09^{\circ}C/+8.5%$ for RCP4.5, $+5.49^{\circ}C/10%$ for RCP8.5. The warming results from increasing Net Down Surface Long Wave Radiation Flux (LW) and Net Down Surface Short Wave Radiation Flux (SW) as well. SW change increases mainly from reduced total Aerosol Optical Depth (AOD) and low-level cloud amount. LW change is associated with increasing of atmospheric $CO_2$ and total cloud amount, since increasing cloud amounts are related to absorb LW radiation and remit the energy toward the surface. The enhancement of precipitation is attributed by increasing of high-level cloud amount. Such climate conditions are favorable for vegetation growth and extension. Expansion of C3 grass and shrub is distinct over East Asia, inducing large latent heat flux increment.

• 전자공학회논문지C
• /
• 제34C권7호
• /
• pp.1-7
• /
• 1997

VHDL simulation requires both analysis and elaboration processes. Reducing the time taken by these processes shorten design cycles. We propose an incremental analysis and elaboration algorithm for VHDL, which minimizes the number of design units to be re-analyzed and re-elaborated after an incremental change, thereby reducing the desing cycle time. Experimental results show about four times performance improvement in analysis and 1.25 times in elaboration over the conventional method.

• 한국조경학회지
• /
• 제43권6호
• /
• pp.25-40
• /
• 2015

우리나라 관광지는 관광진흥법에 따라 지정 관리되고 있으며, 1969년 태종대 관광지가 지정된 이후 현재까지 총 230개소의 관광지가 지정, 조성, 운영되고 있다. 최초 관광지가 지정된 이후 46년이라는 시간이 흘렀으며, 이는 Butler가 주장한 관광지 수명주기 이론에 따라 영고성쇠와 같은 수명주기의 흐름을 보이고 있을 것으로 추정된다. 이에, 본 연구에서는 Butler의 관광지 수명주기 이론을 적용하여 국내 관광지의 수명주기 단계를 분석하고, 향후 관광지가 변화 발전되어야 할 방향성을 제시하는데 기초자료로 활용하고자 연구를 진행하였다. 연구방법은 대상 관광지별 연간방문객수 데이터를 기반으로 변화추이곡선을 도출하였으며, 방문객수 변화율을 기준으로 관광지 수명주기 단계를 구분하였다. 분석 결과, 국내 관광지의 3분의 1 이상이 정체 쇠퇴 단계에 도달하고 있는 것으로 분석되었으며, 특히 온천, 해안/해수욕장 자원유형 관광지가 정체 쇠퇴단계 비율이 높은 것으로 분석되었다. 정체 쇠퇴단계에 도달해 있는 관광지는 쇠퇴의 원인 분석과 해결방안 모색, 새로운 혁신요소 도입의 필요성이 대두되었다. 본 연구의 결과가 국내 관광지의 수명주기 단계를 결정하는 절대적인 기준이 되기에는 부족한 점이 있으나, 우리나라 관광지의 수명주기 단계를 현상학적으로 파악하기에는 적절한 것으로 사료되며, 본 연구를 바탕으로 정체 쇠퇴단계에 도달한 관광지들의 원인을 규명하고, 이를 토대로 새로운 혁신 도입을 통해 관광지의 재활성화 방안 마련의 기초 연구로 활용될 수 있을 것으로 생각된다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.241-244
• /
• 2002

We investigated over critical current characteristics of HTS tapes fabricated by KIMM. The critical current (Ic) of the HTS tapes was 68A/cm. In order to acquire over current I-V characteristics of HTS tapes, we applied AC that is 2-7 times of Ic to these tapes. When applied AC whose peak value is twice of Ic, we found out that total resistance of HTS tapes aid not change. In case of 3 times of Ic, resistances of HTS tapes began to increase slowly. However, superconducting regions of them were maintained stably in this condition. In addition, 280 $A_{peak}$was applied, superconducting regions began to be decreased gradually. Finally, 0.62m$\Omega$ of resistance was measured in HTS tapes which was applied AC correspond to 7 times of Ic at first cycle.

• 복식문화연구
• /
• 제22권4호
• /
• pp.543-554
• /
• 2014

The purpose of this study was to find whether hemline cycles exist and whether hemlines show greater within-year variability over time. Utilizing US Vogue data from 1950 to 2013 on hemline length of women's daywear, total 2102 day-dresses or skirts on full fashion pictures were analyzed. The skirt length was divided by the total length of figure in the picture which was measured from shoulder to ankle. Aggregated yearly means smoothed by means of three-point moving averages were used to provide a better indication of the long-term direction of movement of the hemline. Within-year hemline variability was smoothed by the way of three-point moving average as well. The data showed five cycles on hemline change processes. The first cycle took 21 years from 1950 to 1971, which was the longest period and had the biggest hemline changes. The second cycle was the shortest from 1971 to 1977, in which hemline moved between below-knee length and midcalf. The hemline in the third cycle moved between midcalf and miniskirt. The third cycle took 16 years from 1977 to 1993. The forth was a short cycle from 1998 to 2001, and hemlines moved moderately between below-knee length and above-knee length. The fifth cycle has been on going since 2001, and the hemline has been getting longer after 2007. The within-year variability of hemlines was bigger in 1980s than previous years and was steadily increased.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.27-35
• /
• 1999

A study was made on the fabrication of nanostructured Fe-Co powders by mechanical alloying and their magnetic properties. Microstrural development during the process of MA was inverstigated by means of X-ray diffraction, differential thermal analyzer, scanning electron microscopy and transmission electron microscopy. The magnetic properties of NS Fe-Co powders were evaluated through the measurements of the saturation magnetization $(M_s)$ as well as the coercivity $(H_c)$. The average grain size calculated from line braodening in XRD peak was about 10nm or less and confirmed by TEM. In this experiment, two different milling methods (cycle opertion and conventional milling) were used. Cycle operation had an advantage over the conventional milling method in that more refined powders can be obtained. Solid state alloying of the components was confirmed from both the change of the saturation magnetization and the change of lattice parameter with Co contentration. Maxium $M_s$ was obtained at the composition of 30at.%Co. Relatively high coercivities of 10~150e were obtained for the compositions investigated, and this seems to be due to the high amount of internal strain introduced during milling.

• 대한전기학회논문지
• /
• 제33권8호
• /
• pp.316-324
• /
• 1984

In the wound rotor induction motor, the external resistor is usually added to the rotor circuit in order to limit the starting current. In this scheme, whilst the starting current is limited, the available torque is remarkably reduced. In this paper, to improve the starting characteristics the stator current can be maintained constant by adjusting the external resistor. To change the external resistor, teh chopper and the resistor is connected in parallel, and the chopper duty cycle is adjusted by microprocessor. The duty cycle is calculated according to the actual speed of motor by microprocessor look-up table map. In this suggested scheme, the starting characteristics are remarkably improved without over-current. The starting time of this system is reduced by 20-48 Percent compared with fixed extemal resistance system in the same load.