• 자원리싸이클링
• /
• 제11권2호
• /
• pp.3-13
• /
• 2002

본 연구에서는 시안 성분을 제거함에 있어 처리수의 재활용이 가능한 과산화수소에 의한 시안분해 특성을 규명하기 위한 실험을 수행하였다. 수용액중의 과산화수소의 자가분해반응은 pH와 금속촉매(Cu) 유무에 크게 좌우된다. pH 10 이하에서는 자가분해반응은 미미하여 90%이상의 과산화수소가 잔류하지만 pH 12에서는 90경과시 잔류 과산화수소가 9%이하로 낮아졌다. 금속촉매 첨가(5 g Cu/L)한 경우 pH 12에서도 40분 경과후 대부분의 과산화수소가 분해되었다. 유리시안의 휘발성은 용액의 pH에 크게 좌우된다. 동일한 240분 경과시 pH 8이하에서 대부분의 시안이 휘발하는데 반하여 pH 10이상에서는 10%미만이 휘발하였다. 비촉매반응에 의한 과산화수소의 시안분해실험에서는 $H_2$$O_2$/CN 몰비 4까지 과다하게 증가하여도 8%가량의 시안이 잔류하였다. 그러나 구리촉매반응에 의한 과산화수소의 시안분해 실험에서는 과산화수소 및 구리 첨가량이 증가함에 따라 분해속도가 증가하였다. 그러나 일정량 이상 첨가시 과산화수소의 자체분해 반응에 의해 $H_2$$O_2$의 시안분해 효율이 감소하며 과산화수소와 구리의 적정투입량은$ H_2$$O_2$/CN 몰비 2, Cu 몰비 0.05로서 이때의 분해속도는 22 mM/min, $H_2O$$_2$효율은 57%이었다. 또한 이러한 적정조건에서 70분 반응시 완전제거가 가능하였다.

• 자원리싸이클링
• /
• 제13권1호
• /
• pp.28-38
• /
• 2004

시안 함유 도금폐수의 재활용이 가능한 전기적 산화법에 의한 수용액상의 시안 성분 분해특성을 규명하기 위한 실험을 수행하였다. 전해산화에 의한 유리시안 분해실험 결과, 전류효율과 분해속도를 고려할 때 전압 5V, 구리촉매량 Cu/CN 몰비 0.05가 적정조건이었으며, 이때의 전류효율은 26%, 분해속도는 5.6 mM/min 이었으며 적정수준 이상의 전압과 구리첨가는 분해속도를 소폭 상승시키나 전류효율은 증가하지 않았다. 지지전해질의 증가는 전류밀도의 증가로 분해속도를 소폭 증가시키나 전류효율은 크게 감소하였다. 초기 유리시안 농도실험 결과, 과산화수소 산화와 유사한 결과를 나타내어 시안농도 증가시 분해속도 및 전류효율이 동시에 증가하므로 고농도 시안일수록 적절한 공정으로 판단된다. 각 변수가 총괄 반응속도에 미치는 영향을 확인하기 위하여 In($C_{CN}$ /$C_{CNo}$ )와 시간과의 관계로부터 계산한 총괄 반응속도 상수는 $1.6∼7.3${\times}$10^{-3}$ $min^{-1}$ 이었으며 시안농도에 대하여 1차 반응식을 만족하였다.

• 공업화학
• /
• 제8권3호
• /
• pp.438-445
• /
• 1997

마드래스형 티타늄 기판위에 전착시킨 $\beta$형-이산화납 전극을 이용하여 도금폐수중의 시안염을 분해하기 위한 최적조건에 관하여 검토하고자 하였다. 시안분해에 알맞는 온도 및 pH를 검토한 후 500ppm NaCN을 전해질로 하여 시안분해효율이 높아질 수 있는 이산화납의 전착전류밀도와 시안의 분해전류밀도를 구하였으며, 이산화납 전극의 내구성을 조사하였다. 시안화수소의 발생은 온도 $40^{\circ}C$이상의 시안염용액에서 활발했으며 pH 13이상에서는 시안화수소가 발생하지 않았다. $5A/dm^2$의 전류밀도로 전착시킨 이산화납전극에서 최대의 시안분해효율을 나타냈다. $0.08A/dm^2$의 시안분해전류밀도에서 약 70%의 시안분해 전류효율을 보였으며 $4A/dm^2$이상에서는 약 10% 정도로 일정해지는 경향을 보였다. 이산화납 전착층은 약 $20A/dm^2$의 시안분해 전류밀도에서부터 열화가 일어났으며 약 $50A/dm^2$에서 파괴되었다.

• Toxicological Research
• /
• 제23권1호
• /
• pp.47-53
• /
• 2007

Amygdalin is a cyanogenic glycoside which is commonly found in almonds, bamboo shoots, and apri-cot kernels, and peach kernels. Amygdalin was first hydrolysed into prunasin, then degraded into cyanohydrin by sequential two-stage mechanism. The objective of this study was to examine the amygdalin decomposition and cyanide formation at various in vitro conditions, including acid, enzyme and anaerobic microbes (AM) in human feces (HF). In acid hydrolysis mimicking gastric environment, amygdalin was degraded to cyanide up to 0.2% in specific pH. In contrast, enzyme assay showed higher cyanide generation either by ${\beta}$-glucosidase, or by incubation with microbe. In conclusion, we are convinced of cyanide generation are occurred mainly by microbiological activities of the gut flora up to 41.53%. After ingestion with some staff, the degree and site of degradation in an organism is a key parst of regulatory decision making of that staff.

• Environmental Engineering Research
• /
• 제11권6호
• /
• pp.318-324
• /
• 2006

The higher valence state of iron i.e., Fe(VI) was employed for the oxidation of one of an important toxic ion, cyanide in the aqueous medium. Cyanide was oxidized into cyanate, which is 1,000 times less toxic to cyanide and often accepted for its ultimate disposal. It was to be noted that Fe(VI) is a very powerful oxidizing agent and can oxidize most of the cyanide within few minutes i.e., ca 5 mins of contact. The data was obtained by the UV-Visible measurements for the Fe(VI) decomposition. The UV-Visible data was used to evaluate the overall rate constant for second order redox reaction between ferrate(VI) and cyanide. Also the pseudo first order rate constant was calculated as keeping the cyanide concentration in excess.

• 기술사
• /
• 제14권1호
• /
• pp.22-29
• /
• 1981

This study concernes the decomposition of cyanide ion in electroplating plant wastewater and COD variation of photodeveloping wastewater under various conditions. Determinations of CN- concentration were carried out by AgNO$_3$ titration method. The sample solutions were pretreated by passing ozone and decompositions were checked as a function of time for ozone treatment. Analysis of film developing wastewater was carried out by KMnO$_4$ method. Electroplating plant wastewater was also examined at various pH; decomposition rate of cyanide ion was found to increase at higher pH. Time required for the decomposition could be shortened by removing the heavy metal ions under alkaline condition. The effect of temperature on decomposition was studied at 40$^{\circ}$ and 60$^{\circ}C$. The result was better at 40$^{\circ}C$ although time for decomposition was almost same at both temperatures. Analysis of film developing wastewater revealed that COD decrease was faster during the first 1 to 2 hours. However, further decrease could not be effected. The existence of unknown special organics resistant to the decomposition was believed to be the reason.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.343-347
• /
• 2012

충전형 저온 플라즈마 반응기 내에서의 가스 상 시안화합물의 분해특성을 반응기로 투입되는 방전 전력, 시안화합물의 유입농도, 운반기체인 공기의 습도 및 반응기 내의 충전물질 등을 변수로 연구하였다. 저온플라즈마 방전의 경우 시안화합물들의 분해는 트리클로로에틸렌에 비하여 상대적으로 매우 낮은 효율을 보였다. 그러나 플라즈마 방전 영역에 알루미나 또는 백금/알루미나 구슬을 충전한 경우 분해효율이 크게 높아졌으며 이는 플라즈마 반응과 더불어 백금/알루미나의 촉매작용에 의한 촉매 반응이 동시에 작용함에 기인한 것으로 판단된다.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.189-194
• /
• 1998

Geochemical study was carried out to find out the distribution of metals and cyanide in soil in the vicinity of the abandoned Keum-Jung mine. Chemical analysis showed that content of As in soil around tailings exceeded 15mg/kg, Korean standard of soil contamination in the farm land. That means the contamination of soil by As is due to input of tailings. According to total decomposition of tailings, As was highly concentrated in tailings. However the water in tailings impoundment was changed to acidic and contaminated by metal and sulfate because the tailings in the top of the tailings impoundment had been oxidized. Acid mine drainage contaminated the water course in the vicinity of the paddy soils. The proper measures are required to prevent contamination of the soil and water in the vicinity of the Keum-Jung mine.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.591-599
• /
• 2019

To convert sewage sludge to energy, drying-gasification characteristics during microwave heating were studied. During the gasification of carbon dioxide, the main products were gas, followed by char, and tar in terms of the amount. The main components of the producer gas were carbon monoxide and hydrogen including a small amount of methane and light hydrocarbons. They showed a sufficient heating value as a fuel. The generated tar is gravimetric tar, which is total tar. As light tars, benzene (light aromatic tar) was a major light tar. Naphthalene, anthracene, and pyrene (light polycyclic aromatic hydrocarbon tars) were also generated, but in relatively small amounts. Ammonia and hydrogen cyanide (precursor for NO_x) were generated from thermal decomposition of tar containing protein and nitrogen in sewage sludge. In the case of sludge char, its average pore diameter was small, but specific area, pore volume, and adsorption amounts were relatively large, resulting in superior adsorption characteristics.