• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.165-174
• /
• 2005

Recently, world leading companies on manufacturing field are trying to adopt a PLM methodology, which is a new production paradigm, for a survival and strengthening the competitiveness. Some projects for a digital shipyard including a methodology of a digital simulation framework are going on by Seoul national university and Samsung heavy industry. A Database methodology for a scheduling data, an interfacing methodology for a simulation input and output, and a synchronized simulation related methodology are required for enhancing the value of the digital simulation for shipbuilding. In this paper, such a methodologies and a related case study for a fabrication factory and an assembly factory are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.9-14
• /
• 2002

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.697-708
• /
• 1995

For many practical optimization problems where the system components are stochastic, the objective functions can not be represented analytically. Furthermore, many of these problems are characterized by the presence of multiple and conflicting objectives. In this research, we introduce a new algorithm through an interactive cutting plane method for solving this multi-criteria simulation optimization problem. Then a turning process is evaluated through the proposed algorithm.

• Journal of Korean Society of Forest Science
• /
• v.80 no.1
• /
• pp.9-19
• /
• 1991

This paper discusses the applicability of two simulation models for a ten year planning period in order to predict changing forest conditions. Two simulation models therefore were developed and applied to 3,844 ha of a national forest in Kangwondo province, which is managed by Joongbu Forest District Headquaters. Growth functions of three species were derived and used to predict the residual timber volume over time. Two alternative cutting schedules caused 10-14% difference in the residual timber volume in the end of ten year planning period. This suggests the important of correct decision-makings of forest managers in forest management planning.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.149-158
• /
• 2000

After measuring actual stress by two measurements(Dynamic Strain Meter, Histogram Recorder) on truss rail road bridge, we could perform time history analysis by 3-D beam element method on modelling bridge. And then, after analyzing bridge structure in static by 3-D modelling, we estimated degree of fatigue damage in main member, secondary member of tie zone, cutting area of base metal cross section for confirming the result. In case that the simulated stress is carried out on modeling bridge, most of those simulation mainly is performed by main members. But in real bridge fatigue damage problems generally caused by junctions, connections, joints in which especially local stress is activated. Therefore, in this paper actual stress on critical area was estimated through the analysis result by simulation. With this study, we can estimate the degree of fatigue damage from a safety point of view and comparative accuracy.

• Journal of Biomedical Engineering Research
• /
• v.41 no.4
• /
• pp.154-164
• /
• 2020

Various simulator systems for surgery training have been developed and recently become more widely utilized with technology advancement and change in medical education adopting actively simulation-based training. The authors have developed tissue-instrument interaction modeling and graphical simulation algorithms for an arthroscopic surgery training simulator system. In this paper, we propose algorithms for basic surgical techniques, such as cutting, shaving, drilling, grasping, suturing and knot tying for rotator cuff surgery. The proposed method constructs a virtual 3-dimensional model from actual patient data and implements a real-time deformation of the surgical object model through interaction between ten types of arthroscopic surgical tools and a surgical object model. The implementation is based on the Simulation Open Framework Architecture (SOFA, Inria Foundation, France) and custom algorithms were implemented as pulg-in codes. Qualitative review of the developed results by physicians showed both feasibility and limitations of the system for actual use in surgery training.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.175-181
• /
• 2013

The primary element of machining automation is to maximize the utilization of machine tools, which determines the output and lead-time. In particular, 95% of raw materials for wing ribs are cut into chips and 0.6 ton of chips are generated every hour from each machine tool. In order to verify the chip recycling system that controls the chips from the machines in five-axis FMS line, a simulation of the virtual model is constructed using the QUEST simulation program. The optimum speed of the chip conveyor and its operating conditions that directly affect the efficiency of the FMS line are presented including the chip conveyor speed, the maximum capacity of the hopper, and the number of chip compressors.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.128-136
• /
• 1999

This paper suggests a new object-oriented methodology, ESBD(Evolutionary Simulation Based Design), for the development of an automated manufacturing system in shipbuilding. The target system, AHMS(Automated Hull-piece Manufacturing System), is a virtualized and distributed system controlling the manufacturing processes of storing, surface-pretreatment, cutting, 1st and 2nd curvature generation of material plates. The control and product-flow simulation is applied for the real-time product monitoring and product data management(PDM). The prototype system of AHMS also outlines the layout of the new automated factory.

• KSCI Review
• /
• v.2 no.1
• /
• pp.121-129
• /
• 1995

Fault simulation of logic circuits is an important part of the test-generation process. It is used for the propose of generation fault dictionaries or for the verification of the adequacy of tests. In this paper, a backtrace fault simulation is proposed to test generation. This is consists of 3 part ; initialization phase for given circuit, backtrace fault simulation phase to find fault list and reevaluation phase to list event. The main idea of this algorithm is to retain a minimum fault list by cutting uncontrollable lines of path when a logic event occurs in backward tracing phases. And the simulator is revaluates a fault list associated with the output of an element only if logic event occurs at any of its inputs when a list event occurs at one of its primary inputs. It reguires a O(n) memory space complexity. where n is a number of signal lines for the given circuits. Several examples are given to illustrate the power of this algorithm.