Trends in Virtual Machine Tool research

가상공작기계의 연구동향

  • Jo, Dong-U (Dept. of Mechanical Engineering, Pohang University of Science and Technology) ;
  • Go, Jeong-Hun (Dept. of Mechanical Engineering, Graduate School of Pohang University of Science and Technology) ;
  • Jeong, Yeong-Hun (Dept. of Mechanical Engineering, Graduate School of Pohang University of Science and Technology)
  • 조동우 (포항공과대학교 기계공학과) ;
  • 고정훈 (포항공과대학교 기계공학과 대학원) ;
  • 정영훈 (포항공과대학교 기계공학과 대학원)
  • Published : 2002.06.01

Abstract

Keywords

References

  1. Ehmann, K. F., DeVor, R. E., De Meter, E. C., Dornfeld, D., Kapoor, S. G., Ni, J., Rajukar, K., Shin, Y., and Sutherland, J., 'A Framework For a Virtual Machine Tool(VMT),' Trans. of NAMRI/SME, Vol.XXI, pp. 143-148, 1998
  2. http://mtamri.me.uiuc.edu/testbeds/testbed.intro.html
  3. http://www.malinc.com/CutPro/index.htm
  4. Kline, W. A., DeVor, R. E., Lindberg, R., 'The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts,' Int. J. Mach. Tool Des. Res., Vol.22, No. 1, pp. 7-22, 1982 https://doi.org/10.1016/0020-7357(82)90016-6
  5. Yun, W.S., Cho, D.W., 'An Improved Method for the Determination of 3D Cutting Force Coefficients and Runout Parameters in End Milling,' Int. J. of Adv. Manuf. Technol., Vol. 16, No. 12, pp.851-858, 2000 https://doi.org/10.1007/s001700070001
  6. 이상규, 고성림, '엔드밀 가공시 표면형성 예측을 통한 정밀가공에 관한 연구', 한국정밀공학회지, 제16집 제4호,pp. 229-236, 1999
  7. J.H. Ko, W.S. Yun, D.W. Cho, 'Off-line feed rate scheduling using virtual CNC base on an evaluation of cutting performance,' Computer-Aided Design, 2002, accepted https://doi.org/10.1016/S0010-4485(02)00059-3
  8. 이한울, 고정훈, 조동우, '향상된 절삭력 모델 기반의 NC 코드 최적화', 한국정밀공학회 2001 년도 추계학술대회 논문집, 수원, 경희대학교, 26-27, pp. 37-42, 2001
  9. http://erc.engin.umich.edu/
  10. http://www.iwb.tum.de/
  11. Geoffrey Boothroyd, 'Product design for manufacturing and assembly,' Computer-Aided Design, Vol. 26, pp. 505-520 https://doi.org/10.1016/0010-4485(94)90082-5