• Health Policy and Management
• /
• v.9 no.3
• /
• pp.95-112
• /
• 1999

The objectives of this study were to develop the therapeutic recreation programs for relieving depressive symptoms of the elderly and to verify the effect on their psychological condition. The key elements of these programs, which consisted of 9 sessions. were aerobic exercises, group dynamics. and making fun. These programs were developed through a multidisciplinary approach with social workers and the faculties of preventive medicine. The social workers gave these programs to fifteen elderly people at the community center, so called noinjung, for 9 weeks. Before intervention of this program for the experimental group, the baseline was measured by GDS(geriatric depression scale). After intervention for 9 weeks, GDS as an outcome was measured to evaluate the effects of the program. This data was analyzed by $X^2$-test and Wilcoxon signed rank test. and the results were as follows: 1. Based upon the cutting point(GDS = 5) which could distinguish between depression group and normal group, the number for the normal group increased, while the number for the depression group decreased slightly after intervention with the therapeutic recreation programs, however, there was no significant change(p〉0.05). 2. The score of GDS decreased significantly after intervention with the therapeutic recreation programs(p〈0.05). 3. The scores of GDS decreased in widow(or) group and in female group compared to those of the married group and the male group, respectively(p〈0. 05). 4. The score of GDS increased in groups with similar labor and emotional support compared to those of groups with sufficient or less support, respectively(p〈0.05), These findings indicate that the therapeutic recreation programs might be effective for relieving depressive symptoms of the elderly. It is, therefore, suggested that this program be modified and standardized through review of the intervening process, experimental results, and responses of clients for appling in other noinjungs.

• Korean journal of food and cookery science
• /
• v.20 no.1
• /
• pp.86-94
• /
• 2004

The purpose of this study was to investigate the changes of hardness and microstructure of Dongchimi cooked with various source of water(distilled water, purified water, Cho Jung Carbonated Natural water). This study was conducted to observe the changes of pH, total acidity, salt content, turbidity, texture and microstructure. Dongchimi cooked with source of water of water was fermented at 10$^{\circ}C$ for 46 days. The changes of pH on Dongchimi cooked with various source of water decreased in all samples during fermentation period, and then showed a slowly decrease after 12 days of fermentation. The total acidity of Dongchimi cooked with Cho Jung Carbonated Natural water was arrived slowly at best tasting condition 0.3 ∼ 0.4 point compared with other conditions. So Dongchimi cooked with Cho Jung Carbonated Natural water was continued to the best tasting condition for end of fermentation. At early stage of fermentation, the changes of turbidity of Dongchimi used Cho Jung Carbonated Natural water showed highly as compared with other test condition for 12th days of fermentation. The maximum cutting force of chinese radish of Dongchimi showed the highest value among all at the 25th day of ripening and then decreased gradually. The maximum cutting force of chinese radish of Dongchimi used Cho Jung Carbonated Natural water was the highest compared with other conditions at 25th day of fermentation. The calcium content of Dongchimi juice used Cho Jung Carbonated Natural water was observed hish at the early stage of fermentation and showed the highest value at 25th day of ripening. The calcium content of chinese radish and Dongchimi juice of Dongchimi cooked with water purifier was lower than that of Dongchimi cooked with Cho Jung Carbonated Natural water, and was higher than that of Dongchimi cooked with Distilled water at the early stage of fermentation. The magnesium content in all samples increased gradually from the early stage of fermentation. The microstructure showed disintegration appearance of middle lamella and cell wall during fermentation period.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.94-101
• /
• 1998

The oil separation is effectively performed from the oil containing alkaline cleaner solution by using a backflushed ultrafiltration system, where hollow fibers commercially made by polyacrylonitrile copolymer are bundled. Backflushing to reduce membrane fouling during crossflow ultrafiltration is investigated. Experimental observations allow us to understand the behavior of permeate flux according to the relative operating conditions, and determine the optimum condition of normal operation and backflushing. The maximum improvement of net permeate flux owing to backflushing was found to be about 23 % with the condition of 10 min/40 sec for the cycle of normal/backflushing operations. Note that, however, the maintenance of stable permeate flux is lost as the duration of normal operation is increased. The permeate flux depends on both the backflushing pressure and the feed flow rate. It is obvious that there is a critical velocity of feed flow, in which permeate flux is practically independent of backflushing pressure. Above this critical value, the permeate flux is proportional to an appropriate power of the backflushing pressure, $\Delta P_{back}^n$, where exponent n is enhanced with increasing feed velocity.

• Journal of Chest Surgery
• /
• v.44 no.1
• /
• pp.9-17
• /
• 2011

Background: A peripheral extracorporeal membrane oxygenator (p-ECMO) has been developed to support patients who are dying due to a serious cardiopulmonary condition. This analysis was planned to define the clinical situation in which the patient benefits most from a p-ECMO. Material and Methods: Between June 2007 and Aug 2009, a total of 41 adult patients used the p-ECMO. There were 23 males and 18 females (mean age $54.4{\pm}15.1$ years). All patients had very unstable vital signs with hypoxia and complex cardiac problems. We divided the patients into 4 groups. In the first group, a p-ECMO was used as a bridge to cardiac operation. In the second group, patients did not have the opportunity to undergo any cardiac procedures; nevertheless, they were treated with a p-ECMO. In the third group, patients mostly had difficulty in weaning from CPB (cardiopulmonary bypass) after cardiac operation. The fourth group suffered from many complications, such as pneumonia, bleeding, infections, and LV dysfunction with underlying cardiac problems. All cannulations were performed by the Seldinger technique or cutting down the femoral vessel. A long venous cannula of $DLP^{(R)}$ (Medtronic Inc, Minneapolis, MN) or $RMI^{(R)}$ (Edwards Lifesciences LLC, Irvine, CA) was used together with a 17~21 Fr arterial cannula and a 21 Fr venous cannula. As a bypass pump, a Capiox emergency bypass system ($EBS^{(R)}$; Terumo, Tokyo, Japan) was used. We attempted to maintain a flow rate of $2.4{\sim}3.0\;L/min/m^2$ and an activated clotting time (ACT) of around 180 seconds. Results: Nine patients survived by the use of the p-ECMO. Ten patients were weaned from a p-ECMO but they did not survive, and the remainder had no chance to be weaned from the p-ECMO. The best clinical situation to apply the p-ECMO was to use it as a bridge to cardiac operation and for weaning from CPB after cardiac operation. Conclusion: Various clinical results were derived by p-ECMO according to the clinical situation. For the best results, early adoption of the p-ECMO for anatomical correction appears important.

• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.237-247
• /
• 2010

This research was carried out to examine the properties of black charcoal board, in order to find the proper manufacturing condition for the black charcoal-board made of the charcoal. The charcoal in this study was distillated from domestic wood waste, and it were also the purpose of this study to see if the black charcoal-board has the advantageous properties of charcoal as a well-being building material against the sick house problem. Domestic wood waste was consisted of MDF 40%, PB 30%, plywood 15% and wood 15%, respectively. Black charcoal board was produced by hot pressing with following conditions; temperature $170^{\circ}C$, three stage pressing cycle of $40-10-40\;kgf/cm^2$(1min.-2.5min.-5min.) and non formaldehyde adhesives [P15%+M5%:MDI(M), poly vinyl acetate emulsion(P). Fine mixed particle size [#6-12(16.9%), #12-18(16.7%), #12-40(47.2%), #40-60(9.5%), #60-100(5.9%), less than #100(3.8%)] gave better results than larger particle size [over #6(33.8%), #12-18(17.7%), #12-40(37.7%), #40-60(6.4%), #60-100(2.6%), less than #100(1.8%)]. Final moisture content of the mat was best at 36%. Black charcoal-board showed less MOR and IB(internal bond), more WA(water absorption) than that of white charcoal-board. Black charcoal board showed not only the same gas adsorption and dimensional stability as white charcoal board but also good cutting, nailing and drilling for indoor environment systems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.4
• /
• pp.221-226
• /
• 2006

This study was conducted to investigate the effect of tall type mixtures and turf type mixtures on dry matter yield, botanical composition and quality. The experimental design includes two mixture types : Tall type mixtures; orchardgrass (Potomac) 50+tall fescue (Fawn) 20+ Kentucky bluegrass (Kenblue) 10+red clover (Kenland) 20%) and turf type mixtures; Kentucky bluegrass(Newport) 60%+tall fescue (reboil Jr.) 20+perennial ryegrass (palmer II) 20%. The DM yield was higher obtained in tall type mixture than that of turf type mixture (p<0.05). In the chemical composition, Turf type mixture was higher in crude protein (CP) and dry matter digestibility (DMD), but lower in fibrous compound as NDF, ADF, cellulose and lignin than those of tall type mixture (p<0.05). The crude protein dry matter (CPDM) and digestible dry matter (DDM) yield was higher in tall type mixture than turf type mixture (p<0.05). In this experiment, nutritive value of turf type mixture was higher than that of tall type mixture, but CPDM and DDM yield of turf type mixture were lower than that of turf type mixture due to low dry matter yield. On the other hand, turf type mixture was obtained high feed value, and maintaining the various botanical composition on the 13 th cutting frequency condition. therefore, turf type mixture had a utilization possibility under grazing livestock as sheep and milk goats.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.4
• /
• pp.73-85
• /
• 1991

Rhododendron mucronulatum for. albiflorum, native species is a shrub that has white flowers on May to June, and rare species endangered by people's rash digging or cutting. But its physiological ecological characteristics and propagation method are not being known at all. Therefore, this study was executed to utilize this species as the planting material for landscaping by analysing its habitat environment and growth form, and also experimenting its seed and vegetative propagation, and it field culture and utilization. The results are as follows; 1. The elevation, gradient and direction of this species were 295-1,350m, 10-36$^{\circ}$, northwest respectively. It was found that the species is shade-liking plant that grows under forest cover of average 51.33%. 2. The soil pH and water content of its habitat were 5.4, 25.41% respectively. The organic matter content was 6.29% that was higher than 3.2%, the average organic matter content of forest soil in Korea. 3. Representative plant community within which this species was living was Quercus mongolica community, and its main neighboring species were Lindea obtusiloba, Fraxinus sieboldiana, Rhus trichocarpa, Rhododendron Schlippenbachii, Rododendron mucronulatum. 4. The leaf length and width of this species were 39.18mm, 12.60mm respectively. This result showed that generally its leaf size was larger than that of R. micranthum, R. yedoense var. poukhanense and R. mucronulatum var. ciliatum and smaller than that of R. mucronulatum and R. schlippenbachii. 5. The whole size of its pollen was, as 59${\times}$61$\mu\textrm{m}$, the largest of plants of Rhododendron family including R. mucronulatum and R. mucronulatum var. ciliatum. 6. The result of seed germination experiment at intervals of 5$^{\circ}C$ from 15$^{\circ}C$ to 30$^{\circ}C$ presented the highest germination rate of 94.7% at 20$^{\circ}C$ numerically, but high percent germination at all temperature levels without significant difference. And the seed of this plant proved to be sun-liking seed at requiring dormancy in germination. 7. Through seed germination experiment by treatment of growth regulators such as GA. Thiourea and Kinetin under dark condition, it was found that the effect of GA treatment on germination increase and acceleration was the highest. 8. In greenwood cutting, rooted rate by treatment of various concentration of IBA and NAA on clay and vermiculite bed was not wholly high, but 100ppm plots of both IBA and NAA of clay bed showed relatively good rooted rate. 9. As result of field culture experiment for finding out optimum growth temperature and light intensity, growth conditions such as height, number of leaves, fresh weight and chlorophyll contents were the best at night/day temperature of 20/25$^{\circ}C$ and under 1/2sun. Also, the photosynthetic rate was the highest at 25$^{\circ}C$. Accordingly, it was found that optimum temperature and light intensity for growth of this plant are 25$^{\circ}C$ (day temperature), 50% of natural light respectively.

• Journal of Nutrition and Health
• /
• v.18 no.4
• /
• pp.283-292
• /
• 1985

A sanitary quality of a university foodservice establishment was assessed in terms of time and temperature, pH and Aw, and microbiological evaluation. Critical control points during various phases in product flow of fried fish cake soup were identified using hazard analysis concept. The results are summarized as follows : 1) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, and hot - holding of soup before assembly were critical. 2) pH and Aw values were in favorable for microbial growth. 3) Microbiological data indicated that microbial quality of ingredients was in poor condition. A holding practice of cooked ingredients at room temperature might provide the chance for microbial contamination and multiplication. Hot - holding time and temperature of soup should be strictly controlled to assure the food safety, since the microbial quality of serving food can be directly influenced by the hot - holding temperature of soup. 4) Microbiological test results for food containers, equipments, working surfaces, and supplies indicated that sanitary conditions of earthenware, gloves, wiping cloths and cutting board should be improved promptly. 5) Critical control points identified were : ingredients, pre - preparation, post - preparation, and holding before assembly and service. 6) Guidelines for the effective quality control program for this operation were suggested.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.72-76
• /
• 1985

Populus alba ${\times}$ P. glandulosa cuttings in nursery bed were inoculated with mycelium of ectomycorrhizal fungus, Pisolithus tinctorius (Pt) to evaluate effectiveness of the fungus in growth stimulation of poplar. Pt was cultured in 1l glass bottles with vermiculite-peatmoss mixture moistened with modified Melin-Norkrans' solution. The nursery bed was arranged for microplots of $1{\times}2m$ in size and fumigated with methyl bromide before inoculation and cutting placement. Fifty cuttings were placed in each microplot and two treatments (fumigation only and fumigation plus Pt inoculation) were replicated three times. At the end of the first growing season, inoculated plants grew 19% faster in height and produced 49% more dry weight (above-ground portion) than uninoculated plants. Survival rate of inoculated cuttings was also improved by 20% over that of uninoculated cuttings. Inoculated cuttings developed abundant fine root system with golden brown zigzag tips. In the middle of September a sporocarp of Pt was produced from an inoculated plot, suggesting successful establishment of mycorrhiza between poplar and Pt fungus.