• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.161-165
• /
• 2005

In this study, peeling test of the Altari radish on kimchi pre-processing system for mechanization was performed with the longitudinal plane peeling type with wider cutting blade than that of the peeled chip's. To determine the optimum cutter shape to match this plane peeling type, the peeling tests depending on variable cutting speed, rake angle and blade angle using the blade with thickness as 2 m and width as 50mm were performed, and the patterns of the peeled chips and peeling resistances were investigated. As the result of the tests, the rake angle of the blade with clean peeled surface of the Altari radish was over $45^{\circ}$, and the blade angle and rake angle with the minimum peeling resistance was $20^{\circ}\;and\;60^{\circ}$, respectively. The optimum peeling conditions were; the peeling speed 0.2m/s, blade angle $20^{\circ}$ and the rake angle $60^{\circ}$, and the peeling resistance of each blade was 15 N.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1414-1417
• /
• 2004

A thick-layered RP process, transfer-type variable lamination manufacturing using expandable polystyrene foam (VLMST) has been developed to have the advantageous characteristics such as high building speed, low cost for introduction and maintenance of VLM-ST apparatus, and little staircase surface irregularities of parts. However, VLM-ST has difficulty fabricating an axisymmetric shape and a large-sized freeform shape because of the limited sloping angles and small build size. The objective of this paper is to develop a multi-functional hotwire cutting system using EPS-foam (MHC). MHC employs a four-axis synchronized hotwire cutter with the structure of two XY movable heads and a turntable. In order to examine the applicability of the developed MHC apparatus, an axisymmetric shape, a polyhedral shape and a large-sized freeform shape were fabricated on the apparatus.

• 오토저널
• /
• 제10권2호
• /
• pp.54-60
• /
• 1988

This paper presents a study of tool-life equation on cut-off test by the statistical approach, referred to as response surface methodology instead of a conventional one-variable at a time method. It is the merit of response surface methodology that the test time is reduced to minimize the size and accurate analysis can be done. The reliability of such an equation can also be estimated. Two independent variables, cutting speed and feed rate, were investigated. A first order modeling equation is presented in this project. The results of this study are as follows that tool-life in cut-off operation is affected by cutting speed more than feed, and first order tool-life predicting equations are in good agreement with experimental results.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.42-51
• /
• 1999

An experimental modeling of cutting and structural dynamics and the on-line detection of malfunction process is substantial not only for the investigation of the static and dynamic characteristics of cutting process but also for the analytic realization of diagnostic systems. In this regard, We have discussed on the comparative assessment of two recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision round shape machining such as turning, drilling and boring in mold and die making. In this study, simulation and experimental work were performed to show the malfunctioned behaviors. For this purpose, two new recursive approach (REIVM, RLSM) were adopted fur the on-line system identification and monitoring of a machining process, we can apply these new algorithm in real process for the detection of abnormal machining behaviors such as chipping, chatter, wear and round shape lobe waviness.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.48-52
• /
• 2019

A coolant pump is the device that cools processed articles and tools when using cutting, boring, and grinding machine tools and provides cutting oil for distributing or cleansing the cut chip to the worktable, processing position, etc. In particular, it consumes a large proportion of energy in machine tools, so it plays an important role in terms of energy efficiency. The purpose of this research is to optimize the shape of impeller, which directly affects performance improvements, to determine the capacity of the coolant pump. To do so, we carried out a parametric analysis with the geometric shape of the impeller as the input variable.

• 복식문화연구
• /
• 제25권3호
• /
• pp.315-326
• /
• 2017

The purpose of this study is to investigate the design methods and characteristics of papercraft fashion from 2001 to 2015. The study has been conducted through theoretical research and case study. Overall, types of papercraft expressions are classified into the following four categories: narrative papercraft fashion, organic papercraft fashion, variable papercraft fashion, and recycling papercraft fashion. The characteristics and aspects of each type of papercraft is described below. First, narrative papercraft fashion expresses as factual description of the natural environment. These works convey fantastic image by showing fairy tale animals or plants using paper folding or cutting. Second, organic papercraft fashion creates a futuristic shape by expressing organic parts in nature. Also, it often depicts future-oriented images by repeatedly representing organic shapes using uniform patterns in nature. Third, variable papercraft fashion expresses a variety of changing shapes through a flexible design based on the style of wearing. This variation may be accomplished through changeable dress connected to human gestures. Variable papercraft represents play-fulness, which conveys enjoyment to the wearer and the audience. Fourth, recycling papercraft fashion uses paper materials of the past, and recreates them into artworks through handicraft techniques. Recycling papercraft conveys high value added fashion by dissolving the material into pulp.

• 정보과학회 논문지
• /
• 제42권11호
• /
• pp.1361-1371
• /
• 2015

클라우드 서비스가 증가하고 다양해짐에 따라 클라우드 서비스 사용자들의 요구사항을 만족하는 가장 적절한 서비스를 찾아주는 클라우드 서비스 브로커(CSB) 기술이 나타났다. CSB를 통해 클라우드 서비스가 사용되는 것을 촉진시키기 위해서는 서비스 수준 협약(SLA) 기반의 협상 과정을 통해 사용자들의 요구사항에 맞는 품질 수준을 보장하는 것이 중요하다. 그러나 클라우드 서비스 유형 별로 품질 수준을 표현하는 측정 기준과 척도, 계산 방식이 서로 상이하다. 따라서 클라우드 서비스의 품질에 대한 가변성을 분석하고, 분석된 품질 수준을 보장 및 개선하기 위한 SLA 모델이 필요하다. 본 논문에서는 cross-cutting 개념을 적용하여 클라우드 서비스의 유형 별 품질 메트릭을 분석하고 사용자와 제공자 간의 품질 수준에 대한 협상을 담당하는 VSLA(Variable SLA) 메타모델을 제안한다.

• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.294-299
• /
• 2012

본 논문은 단체 급식용 동결 생선을 일정한 중량으로 절단하기 위하여, 생선의 외형 및 부피 예측 모델링 기법을 제안하고, 실제 생선에 대한 절단 실험을 수행한다. 단체 급식용 동결 생선은 동결 하는 시점에서 발생한 생선의 휘어짐과, 머리를 절단하고 내장을 제거할 때에 발생하는 중공이 존재한다. 이외에도 동결의 영향으로 나타나는 표면의 반짝임이나 수분 량에 따른 무게의 차이로 인해 측정 및 추정의 어려움이 크다. 따라서 동결 생선의 외형과 부피를 정확히 추정하기 위해서는 상기의 특성과 문제점들을 반영한 복합적인 추정 알고리즘이 필요하다. 이를 위해, 중공 예측, 신경망을 이용한 꼬리부분 패턴 분류 및 모델링, 그리고 적분 기법 기반의 부피 예측 알고리즘을 각각 제안하고, 삼치, 꽁치, 고등어 3종류의 생선에 대해서 3차원 계측, 부피 예측 및 절단 실험을 수행한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.811-815
• /
• 1990

This paper describes the method on image acquisition and image processing in the turning process. The formation of discontinuous chips during high-speed oblique cutting without lubricant was observed by means of video camera recorder and stroboscope. The image processing technique for chip flow is described and the results are presented for variable feeds. It is concluded that experimental values of chip flow angle are similar to theoretical values of Stabler's rule.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.64-70
• /
• 2001

In all the Rapid Prototyping (RP) techniques, the computer-aided design (CAD) model of a three-dimensional part is sliced into horizontal layers of uniform, but not necessarily constant, thickness in the building direction. Each cross- sectional layer is successively deposited and, at the same time, bonded onto the previous layer. The stacked layers form a physical part of the model. The objective of this study is to develop a software for automatic generation of unit shape part(USP) for a new RP process, Variable Lamination Manufacturing using the linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S). In order to examine the applicability of the developed software to VLM-S, USPs of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.