• 방사성폐기물학회지
• /
• 제16권4호
• /
• pp.473-478
• /
• 2018

원전 해체 공정 중 절단 및 용융작업에서 발생되는 방사성 에어로졸은 작업종사자의 호흡을 통해 내부 피폭을 유발하게 된다. 이에 따라 해체 중 방사성 에어로졸로 인한 작업종사자의 내부피폭 평가가 필요한 실정이다. 정확한 내부피폭평가를 위해서는 작업종사자의 작업환경 실측값이 필요하지만 실측에 어려움이 있을 시에는 국제방사선방호위원회(ICRP)에서 제시하는 섭취량 분율 및 입자 크기 등의 권고 값을 통해 내부피폭선량을 추정할 수 있다. 본 논문에서는 입자 크기의 선정은 ICRP에서 권고하는 작업종사자의 고려 입자 크기인 $5{\mu}m$을 적용하였다. 발생량의 경우, 불가리아의 Kozloduy 부지 내의 용융시설에서 발생 된 에어로졸의 포집량 데이터를 이용하여 섭취량을 산정하였다. 또한 이를 이용해 작업종사자의 체내 및 배설물에서의 방사능 수치를 계산하고 BiDAS 전산코드를 통해 내부피폭 평가를 수행하였다. Type M이 0.0341 mSv, Type S가 0.0909 mSv로 두 흡수 형태 각각 국내 연간 선량 한도의 0.17%, 0.45% 수준을 나타내었다.

• 한국자원식물학회지
• /
• 제36권2호
• /
• pp.181-190
• /
• 2023

국내 홉 생산은 외국산 수입으로 1990년대 초반 이후 중단된 상태이나, 최근 수제맥주 붐의 영향으로 국내 생산에 대한 관심이 고조되고 있다. 본 연구는 국내 홉 생산 및 육종을 위한 기반연구로 외국산 도입 홉 6개 품종을 대상으로 생육특성 및 증식기술 개발중심으로 수행하였다. 2021년과 2022년 진행한 홉 생육조사에서 재식 후 4년차보다 5년차에서 일반적으로 홉의 착화고, 착화수, 구화의 크기와 무게가 증가하는 경향을 나타냈다. 홉 삽목 실험의 결과, 일반적으로 발근제 '아토닉' 처리를 하지 않은 물꽂이에서도 전체 평균 발근율이 88%로 높았지만 아토닉을 침지하거나 희석하여 관주할 경우 발근율이 93%로 증가하는 경향을 나타냈다. 아토닉 처리 방법에 따른 발근력과 발근율에는 품종간 차이가 있었다. 발근 삽목묘를 상토 이식 후 생존율을 확인 하였을 때, 조직배양실에서 삽목한 것이 온실에서 삽목한 것에 비해 상당히 생존율이 떨어졌다. 따라서 홉 삽목시에는 물꽂이 만으로도 높은 삽목 성공률을 얻을 수 있으며, 상토 이식 후 식물체를 안정적으로 관리하는 기술 개발이 홉 대량증식에서 중요할 것으로 판단된다. 조직배양 기술을 통해 홉을 증식할 땐 IAA 0.1 ㎎/L에 BAP 1 ㎎/L 보다 TDZ 1 ㎎/L를 첨가하여 배양하는 것이 다경유도에 효과적이다. 이러한 삽목 및 조직배양 증식과 순화 기술을 정립하면, 국내 홉 건전묘 생산에 활용이 가능할 것으로 생각된다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.1-7
• /
• 2008

In the process of continuous hot-dip galvanizing, it is well known that the gas wiping through an air knife system is most effective because of its uniformity in coating thickness, possibility of thin coating, workability in high speed, and simplicity of control. However, gas wiping used in the galvanizing process brings about a problem of splashing at the strip edge above a certain high speed of process. It is also known that the problem of edge splashing is more harmful than that at the mid strip surface. For a given liquid(of a certain viscosity and surface tension), the onset of splashing mainly depends upon the strip velocity, the gas-jet pressure, and the nozzle's stand-off distance. In these connections in the present study, we proposed three kinds of air knife system having nozzles of constant expansion rate, and compared the jet structures issuing from newly proposed nozzle systems with the result by a conventional one. In numerical analysis, the governing equations are consisted of two-dimensional time dependent Navier-Stokes equations, and the standard k-${\varepsilon}$ turbulence model is employed to solve turbulence stress and so on. As the result, it is found that we had better use the constant expansion-rate nozzle which can be interpreted from the point view of the energy saving for the same coating thickness. Also, we better reduce the size of separation bubble and enhance the cutting ability at the strip surface, by using an air-knife having constant expansion-rate nozzle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2955-2960
• /
• 2007

To control the coating thickness of zinc in the process of continuous hot-dip galvanizing, it is known from early day that the gas wiping through an air knife system is the most effective because of the obtainable of uniformity of coating thickness, possibility of thin coating, working ability in high speed and simplicity of control. But, the gas wiping using in the galvanizing process brings about a problem of splashing from the strip edge for a certain high speed of coating. And, it is known that the problem of splashing is caused mainly by the existence of separation bubble at the neighbor of the strip surface. In theses connections, in the present study, we proposed two kinds of air knife systems having the same expansion rate of nozzle, and the jet structures and coating thicknesses from a conventional and new proposed nozzles are compared. In numerical analysis, the governing equations consisted of two-dimensional time dependent Navier-Stokes equations, standard ${\kappa}-{\varepsilon}$ turbulence model to solve turbulence stress and so on are employed. As a result, it is found that it had better to use the constant rate nozzle from the point view of the energy saving to obtain the same coating thickness. Also, to reduce the size of separation bubble and to enhance the cutting ability at the strip, it is recommendable to use an air knife having the constant expansion rate nozzle.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.195-214
• /
• 2000

The high-speed steel (shorten as HSS) consists of Fe and several kinds of transition metal carbides. The cutting tools or wear-resistant materials made from HSS experience relatively high thermal shock because a coolant such as water or oil is flowed over the surface of heated HSS. The purpose of this research is to increase the hardness, strength, fracture toughness and thermal shock resistance of HSS. A possible strategy is to incorporate a hard ceramic material with high strength in HSS matrix. This paper describes the processing, microstructure and mechanical properties of the oriented unidirectional mullite fiber/HSS composite. The unidirectional mullite fibers of 10${\mu}{\textrm}{m}$ diameter were dispersed by the ultrasonic irradiation of 38 kHz in an ethylenglycol suspension containing HSS powder of 11${\mu}{\textrm}{m}$ median size. The dried green composites with 4-68 vol% fibers were hot-pressed for 2h at 100$0^{\circ}C$ in Ar atmosphere under a pressure of 39 MPa. The higher density was achieved in the composite with a lower content of fibers. The oriented unidirectional fibers were well dispersed in the HSS matrix. The average distance between the center of fibers in the cross section was close to the value calculated from the fiber fraction. No reaction occurred at the interfaces between HSS and mullite fibers in the composites. The composite with 13.6 vol% fibers showed 100 MPa of four point flexural strength at room temperature. The thermal expansion of composite with heating was influenced by the orientation of mullite fibers.

• 한국콘텐츠학회논문지
• /
• 제9권4호
• /
• pp.19-26
• /
• 2009

전자파를 사용한 유방암 진단을 위한 전자파 노출장치는 RF 송수신 장치와 여러 개의 안테나로 구성된다. 전자파 노출장치를 통해 얻어진 피시험체의 전자파 특성 데이터는 역산란 해석 알고리즘을 통해 유전율과 도전율을 계산 할 수 있다. 본 논문에서는 시험체 내부에 대한 유전율 및 도전율 정보의 분석을 통해 유방암 세포의 유무를 판단하거나, 유방암 세포의 분포에 대한 정보를 쉽게 분석 수 있도록 전자파 기반 유방암 진단 소프트웨어를 개발하였다. 개발된 소프트웨어는 얻어진 유전율과 도전율 정보를 2D 혹은 3D의 컬러 영상으로 가시화 할 수 있는 기능을 제공해 줌으로써 사용자들이 암세포의 유무를 쉽게 판단할 수 있다. 또한 제안한 소프트웨어에서는 정밀한 토모그램 영상의 분석을 위해 영상의 단면뿐만 아니라 특정 영역 위치와 크기 정보를 표시해주는 기능을 제공한다.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.45-53
• /
• 2015

This paper is proposed mathematical load modelling based on system identification approach of energy consumption of residential air conditioning. Due to air conditioning is one of the significant equipment which consumes high energy and cause the peak load of power system especially in the summer time. The demand response is one of the solutions to decrease the load consumption and cutting peak load to avoid the reservation of power supply from power plant. In order to operate this solution, mathematical modelling of air conditioning which explains the behaviour is essential tool. The four type of linear model is selected for explanation the behaviour of this system. In order to obtain model, the experimental setup are performed by collecting input and output data every minute of 9,385 BTU/h air-conditioning split type with $25^{\circ}C$ thermostat setting of one sample house. The input data are composed of solar radiation ($W/m^2$) and ambient temperature ($^{\circ}C$). The output data are power and energy consumption of air conditioning. Both data are divided into two groups follow as training data and validation data for getting the exact model. The model is also verified with the other similar type of air condition by feed solar radiation and ambient temperature input data and compare the output energy consumption data. The best model in term of accuracy and model order is output error model with 70.78% accuracy and $17^{th}$ order. The model order reduction technique is used to reduce order of model to seven order for less complexity, then Kalman filtering technique is applied for remove white Gaussian noise for improve accuracy of model to be 72.66%. The obtained model can be also used for electrical load forecasting and designs the optimal size of renewable energy such photovoltaic system for supply the air conditioning.

• 복식
• /
• 제63권8호
• /
• pp.76-89
• /
• 2013

This study is about 'asymmetry triangle-Mu' Jeoksam and Hansam in the early days of Joseon Dynasty. A study was done regarding the records of Jeoksam and Hansam in literature, the present state of the excavated 'asymmetry triangle-Mu' clothing Jeoksam and Hansam, and finally a deduction of the reason for the appearance of the 'asymmetry triangle-Mu' clothing Jeoksam and Hansam. The width of front length of 'asymmetry triangle-Mu' clothing in the early days of Joseon Dynasty is 29.5~35 cm and the width of one breath of the sleeve is 29.5~35 cm. The width of 'asymmetry triangle-Mu' is 9.5~16 cm and it is relatively big. Comparing to the width of one breath of the sleeve, it is almost 1:2.2~3.6 ratio. Therefore, when the sleeve was cut, the Mu was linked in order to save fabric the gusset of sleeve had to be folded and turned, and finally it became asymmetric. As a result of the above consideration, since the width of upper garments of $16{\sim}17^{th}$ century was big, the wearing of short tops of Jeoksam or Hansam without side vent as a small 'triangle-Mu' was uncomfortable. Because of this reason, the size had no option but to become bigger. So, during the $16^{th}$ and $17^{th}$ century, a period where mass production of fabric was difficult, the 'asymmetry triangle-Mu' type was considered to be a reasonable cutting method. After the middle of $17^{th}$ century, it can be estimated that 'asymmetry triangle-Mu' clothing disappeared according to the narrow aspect of clothing type.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.179-184
• /
• 2013

An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra$9.94{\mu}m$ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.

• 수산경영론집
• /
• 제44권3호
• /
• pp.85-101
• /
• 2013

The foundation of any association or organization should include a mission, a vision, and strategic goals. Vision and mission are frequently discussed in academic and practitioner literature and accepted as key items in strategic decisions. But in these days, the words"change and crisis"are what companies are familiar with. They bringing about uncertainty led the companies to search for new strategies in order to specify their directions. In case of making proper direction for some organization, the role of management philosophy is most important. And also identifying, clarifying and communicating the management philosophy is now a major part of the planning process. This study examines the characteristics of management philosophy items which including mission and vision in Korean fisheries business with contents analysis. in order to achieve these purpose, this research analysing the mission, vision and CEO's greeting with the social network analysis(SNA) which is the most dominant technique in contents analysis. The SNA is evaluated that most popular, rigorous and firm methodology for analyzing, examining and revising some concepts or objects in the context of semantics. The findings of social network analysis show that some critical problems are existed. First, most of the fisheries company did not fully announce the mission and vision irrespective of one's size or scale. Second, there is some coverage insufficiency of stakeholders in mission and vision. And cutting edge topics like environmental problem, corporate social responsibility, consumer sovereignty are not included in management philosophy.