• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.171-177
• /
• 2006

This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.2
• /
• pp.85-90
• /
• 2008

Ships in bad weather conditions are likely to be subjected to accidental loads, such as high bending moment, collision, and grounding. Once she has damage to her hull, her ultimate strength will be reduced. This paper discusses an investigation of the effect of collision damage on the ultimate strength of a ship structure by performing a series of collapse tests. For the experiment, five box-girder models with stiffeners were prepared with a cross section of $720mm\;{\times}\;720mm$ and a length of 900mm. Of the five, one had no damage and four had an ellipse shaped damage area that represented the shape of the bulbous bow of a colliding ship. The amount of damage size was different between models. Among the damaged models, the damage in three of them was made by cutting the plate and stiffener, and in one by pressing to represent collision damage. Experiments were carried out under a pure bending load and the applied load and displacements were recorded. The ultimate strength was reduced as the damage size increased, as expected. The one with the largest amount of damage had damage to 30% of the depth, and its ultimate strength was reduced by 19% compared to the undamaged one. The pressed one has higher ultimate strength than those that were cut. This might be due to the fact that the plate around the pressed damage area contributes to the ultimate strength, whereas the cut one has no plate to contribute.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.299-302
• /
• 2010

A new standard pink rose cultivar 'Noble Eye' was bred from the cross between pink standard cultivar 'Noblesse' and pink standard cultivar 'Pretty Woman' at the Jeollanamdo Agricultural Research and Extension Services (JARES). The cross was made in 2003 and, 'Noble Eye' was finally selected in 2009 after investigating characteristics for three times from 2006 to 2009. 'Noble Eye' a pink standard cultivar has good flower shape with few prickles. The major characteristics of this cultivar was $125.7stems/m^2/year$ in yield. 69.8 cm in length of cut flower, 6.6 cm in flower diameter, 40.5 in petal number, and 9.4 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar was relatively higher than that of control cultivar, 'Noblesse'.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.284-287
• /
• 2010

A new standard rose cv. 'Honey Lemon' was bred by the cross between white standard cv. 'Escimo' and light pink standard cv. 'Medeo' at the National Institute of Horticultural Research Institute. The cross was made in 1999 and 'Honey Lemon' was finally selected in 2003 after investigating characteristics for three years from 2001 to 2003. 'Honey Lemon', a white standard cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are $248.0stems/m^2/year$ in yield, 53.0 cm in length of cut flower, 8.0 cm in flower diameter, 17.0 in petal number, and 16.9 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cv., 'Tineke'. (Registration number: 1151).

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.623-626
• /
• 2010

A new standard rose cultivar 'White Day' was bred from the cross between white standard cultivar 'Athena' and white standard cultivar 'Tineke'at the National Institute of Horticultural and Herbal Science. The cross was made in 1998 and 'White Day'was finally selected in 2002 after investigating its characteristics for three years from 2000 to 2002 (UPOV standards). 'White Day', a white standard cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are 106.3 stems/$m^2$/year in yield, 68.6 cm in length of cut flower, 14.3 cm in flower diameter, 93.5 in petal number per stem, and 13.4 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cultivar, 'Tineke'.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.95-104
• /
• 2018

This study classified the figurative features of the raglan sleeves presented in the Spring and Summer Collections and Fall and Winter Collections abroad in 2010 and 2018 and analyzed the production methods and patterns of the classified raglan sleeves. The analysis results are described below. The raglan sleeves in the latest fashion trends were classified into Type H, Type A, Type O and Type Y per shape. The production features of raglan sleeves in the latest fashion trends included the cutting lines in various shapes, a flounce that made shoulders look wider, and decorations such as gathers, studs, punching, slits, pleats and tucks. The raglan sleeve design was classified into Yoke Raglan, Armhole Princess Raglan, Semi Raglan, Gathered Raglan, Pleats Raglan, Cowl Raglan, Origami Raglan, Circular Curved Raglan, Capes Raglan and Constructive Design Raglan and the patterns per design were presented. For creative and experimental clothing by the analysis of the features of raglan sleeve structure, a variety of configuration methods need to be developed and implemented. The analysis results of this study will contribute to the development of the fashion industry through small quantity batch production pursuing unique styles as the basis for further study on the configuration methods of raglan sleeves. This study will be used in various ways as education materials on sleeve patterns in the educational field. Through the analysis of sleeve patterns, this study tries to provide basic data for planning the design of raglan sleeves and helping to diversify the ladies' apparel market in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.193-205
• /
• 2019

Looking at recent safety accidents in buildings, most of them due to lack of FM expertise, and this is due to human resources. In each all industry areas, some companies are competitive, representational, and leading in the market through long-term expertise and research in their respective fields. In the field of FM industry, some companies offer core-competencies in internal and external innovative building management through competition with others. However, old custom and old management form still exist in the FM field. However, an old custom and old management system still exist in the FM field; it forces cost-cutting and caused by carelessness in technical development competitiveness and safety measures. The government control by safety inspection and facility inspection through legislation of building management, but the management is still weak as a side of in the facility management section due to inspect sth as a mere formality and submit a paper report. These facts exist different kind of usage of the building have a three-party encounter between a building owner, user, and FM enterprises. In this research identify survey, especially building owner (manager)'s choice perception priority for optional factors to choose FM enterprises. Based on this, FM enterprises will be forced to seek a new dimension for better building management. In this light, the purpose of the research is to shape changes in the FM market culture safely and providing better service in building management and understanding building owner's insight through this research's information.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.483-493
• /
• 2020

In this paper, we present a nondestructive analysis using X-ray and microscopic investigation to detect the structure, manufacturing technique and preservation status of the Goryeo lacquered box Inlaid with Mother-of-pearl Chrysanthemum and Scroll Design (Goryeo Lacquered Box). We confirm that the Goryeo Lacquered Box consists of the soft wood as the basic material. The soft wood was coated with textile and then lacquered. The box structure of the Goryeo Lacquered Box was formed of wooden boards with wood plants added to the side, after processing into a trefoil-shaped. The wooden sides of the Goryeo Lacquered Box were cut at regular intervals for easier processing into a curved shape. Moter-of-pearl, tortoiseshell, and metal wire were used to decorate the surface. mother-of pearl was the cutting processing, and tortoiseshell was used for back coloring. The metal line was constructed using one line and twist line.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.42-48
• /
• 2021

In this paper, when manufacturing large/multi-mold parts (more than 30 core parts),A mold manufacturing (tolerance) management system was established through design-processing linkage.The mold manufacturing (tolerance) management system is a design-based measurement shape/measurement position determination system, M/C processing-linked measurement drive system,It is composed of four parts: CAD-linked measurement result analysis system and manager mold part quality management system.In addition, the constructed system was applied to the field and the effect of system construction was evaluated by comparing it with the existing process.As a result of the evaluation, the measurement precision is within 0.02mm, and the time it takes to measure after the end of processing is shorter than that of the existing process.(12 hours → 2 hours) It was shortened to 16.7%.In addition, it was confirmed that the time required for reprocessing after measurement was reduced by 25% (4 hours → 1 hour) compared to the existing process.

• Journal of Industrial Convergence
• /
• v.18 no.6
• /
• pp.99-105
• /
• 2020

In general, heat-based treatments are preferred to form the most natural and elastic curls. Therefore, this study measured the degree of hair damage, which has an influence on hair, in relation to the heat formation of the rods used during perms using a scanning electron microscope (SEM). To examine the influence of the heat formation rods on permanent waves, this study measured the temperature transmitted from such rods. Then, a treatment was given after cutting the hair according to the round shape. According to observation with a SEM, hair breakage was found in the portion in direct contact with the heat, and the broken surface was smooth. According to the study results, it is anticipated that there should be many studies on the rods used during perms in the consideration of their structure and importance using materials that have the property of even heat transmission.