• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.83-88
• /
• 2004

최근 강구조물과 해양구조물에 있어서 박판 부재인 고장력강이 널리 사용되면서 좌굴이 발생할 가능성이 커지고 있다. 특히 선박구조는 상자형 박판 구조물로서 용접이나 절단등의 열 가공에 의하여 필연적으로 판부재에 초기처짐이 발생하게 된다. 이러한 초기처짐은 박판부재가 좌굴을 동반한 복잡한 비선형 거동을 나타낼 때 악영향을 미치는 요소이다. 결과적으로 선체구조물이나 해양구조물에 안정성과 정확성을 부여하기 위해서는 발생 가능한 초기처짐을 이상화 하여 2차좌굴을 고려한 초기구조설계에 반영하여야 한다. 본 연구에서는 종방향 압축하중이 작용하고 네변 단순지지조건인 판에 실제 계측된 여러 가지 초기처짐형상을 적용한 유한요소 시리즈 해석을 하였다. 해석방법으로서는 범용유한요소프로그램인 ANSYS의 탄소성대변형 유한요소법을 적용하였고 해석제어는 Newton-Raphson method와 An-length method를 병용하였다.

• 한국의상디자인학회지
• /
• 제16권3호
• /
• pp.179-189
• /
• 2014

Peplums have a great advantage in easy styling for wearers to acquire desired physical and reminiscent images depending on the type and where it is placed on the waist line. However, the study of peplum blouses has not yet recognized. This study suggests a baseline data for visual appraisals as a determined key factor is changes. The result of this study as follows: First, peplums published between 2012 through 2014 collections are used for decorative effects on tops or bottoms as the finest decoration details of fashioning women's physical attractiveness. Its application has been extended to various fashion themes such as belts and overskirt that are made of peplum itself. Second, peplums published between 2012 through 2014 collections have close correlation of how the position, shape, and length of peplums are attached on bottoms. Peplum effects are categorized as extension of tops, expansion of bottoms, connections of tops and bottoms, and separation of tops and bottoms. Third, total of seventy nine peplum blouses that are found in the domestic online shopping mall are analyzed. The total length of peplum blouses are generally produced to 56 to 61cm, which is little shorter than or approximately equal to the hip line of women aged in between twenty to twenty four. In addition, the most popular peplum design is made of flare and cutting lines on the waist line and is 45.56% of samples. The most common location of peplums is identified as 3 to 6 cm above the natural waist line or the natural waist line and is 78.47% of samples. Fourth, the key factor of peplum blouse that can significantly influence the visual image is the total length of blouse, position of peplum, and peplum shape.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.52-57
• /
• 1999

Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

• 혜화의학회지
• /
• 제10권1호
• /
• pp.133-148
• /
• 2001

From this book, $\ll$GeumGueyoryak Hakbyeongmaekjeungbyeongchi$\gg$, I finally got these conclusions of symptoms and pathology of Hakbyeong. 1. Hakbyeong has main symptoms of repetition of chillness and fever and its main pulse is pulse of Hyeon(弦) and position is in the middle of inside and outside. 2. Change in shape of pulse caused by Hakbyeong can have shape of pulse of Sak(數), Jee(遲), Kin(緊), Dae(大) and more kinds depending on patients constitution, the cause of disease, or whether he/she has been poisoned by other kinds. 3. After 15 days of symptoms, As Cheonki(天氣) and Inki(人氣) get stronger and Saki(邪氣) gets weaker, Jeongki(正氣) can be more recovered and the diseases can be disappeared. But if the disease dose not get away after another 15 days of showing symptom, that disease can be treated as cutting the Jingha under side of him/her. 4. The type of Hakbyeong which is diseased by the keeping the Haksa for long time, can be classified as Hagmo which has symptoms of chillness and fever outside, and of Jinggha inside, Danhag which has symptoms of difficulty with breathing, chest discomfort - caused by fever in the lung at ordinary times -, fever of extremities and nausea and that would make people worn out and thin after all, Onhag which has main symptoms of fever and Mohag which has symptoms of less fever and more chillness. 5. In this thesis it has been described, the Byulgabjunhwan(鼈甲煎丸), Baekhogagaejitang(白虎加桂枝湯), and Chokchilsan(蜀漆散) is the respective prescription for treatment of Hagmo, Onhag, and Mohag. From this conclusion, if the more research about the cause of disease, pathology and prescription of the each symptom from GeumGueyoryak hereafter, I could say more effective prophylaxis and treatment of epidemic disease like todays Hakbyeong can be found.

• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.

• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.337-343
• /
• 2001

This study was purposed to see how men's hair styles of Japan had changed throughout history and results of the study was as follows. There are such evidences as topknots in its primitive styles and wooden combs that several hair styles were tried already in the primitive Jomon Period. In the Yayoi period, bare topknot style without crowns and Mizura style in which hair drop down both ears were popular. In the period of ancient burial mounds, Mizura style was dominative style and varied its form and shape according to classes and status. In the Aska and Nara era, topknot-in-the-crown style in which hair bound in one as in continental style and put in crown or hood, which style was influenced by the Sui and the Tang periods of China. Since the Heian period, topknot-in-the-Ebosi style, binding style, and Karawa style as well as topknot-in-the-crown style came in sight and Sakayaki style became popular in the Kamakura and Muromachi periods. In the Momoyama period, Chasenmage style and Ichomage style were spread widely. In the early Edo era, Wakashumage style and Yaromage style as well as Ichomage style were preferred. In the middle of Edo era in which form and shape of topknot was more distinct symbol of class, status and job than in any other period, Tachmach style under the influence of the Punkin and Honda modes. Sonno style was popular in the late Edo era. There was a drastic disappearance of topknot style by the hair-cutting order during the Meiji Restoration period and civilized hair style of the Jankiri style, a kind of dishevelled hair style without making a topknot was in fashion and continued to the present.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1675-1680
• /
• 2013

최근 저소음, 고속, 고추력의 반송장치가 요구됨에 따라 영구자석 선형동기전동기가 대두되고 있으나 반송경로 전장에 전기자를 설치하는 선형 동기전동기의 특성으로 인해 장거리 반송장치에 적용시 설치비용의 증가를 가져온다. 따라서 우리는 전기자를 분산시켜 배치하는 방법을 제안하여 비용증가의 문제점을 해결하고자 하였다. 하지만 가동자의 진행시 분산배치된 전기자 사이를 통과하게 되면 전기자의 불연속 구간인 단부에 의해 디텐트력이 발생하여 추력 맥동이 발생하고 기기 성능저하와 소음, 진동의 원인이 된다. 따라서 본 논문에서는 단부에 의한 영향을 저감하기 위해 전기자 끝단의 치 높이와 보조치 형상에 따른 디텐트력의 특성을 파악하고 다구찌의 실험계획법을 이용하여 단부 효과를 가장 저감할 수 있는 형상을 제안하였다.

• 자원리싸이클링
• /
• 제5권3호
• /
• pp.37-43
• /
• 1996

형상분리법을 이용하여 폐 PCBs로부터 금속성분을 회수하는 연구가 수행되었다. 기판에 붙어있는 모든 전자부품을 제거한 뒤 절단기 및 cutting mill을 사용하여 -3mm이하로 조쇄하였다. 이 조쇄물을 충격형 분쇄기로 분쇄하여 금속성분들을 단체 분리하였으며 햄머의 회전속도가 분쇄물의 특성에 미치는 영향을 조사하였다. 경사진동판을 사용하는 형상분리법을 이용하여 분쇄된 PCBs로부터 금속성분들을 분리 회수하는 실험을 행하였으며 경사진동판의 진동강도 및 경사각이 분리효율에 미치는 영향을 검토하였다. 경사진동판의 최적 조업조건은 진동간도, Kv=1.40 그리고 진동각, $ heta$=$10^{\circ}$이었다. 본 실험조건에서 회수율과 품위가 각각 90% 이상인 금속성분의 분리회수가 가능하였다.

• 한국육종학회지
• /
• 제41권1호
• /
• pp.40-43
• /
• 2009

절화장미 신품종 "피치푸딩"품종육성은 향기가 우수하고 절화수명이 긴 스탠다드 장미 품종육성을 목표로 2000년도에 적색의 스탠다드 '레드산드라'를 모본으로 향기가 있는 백분홍색의 스탠다드 '도로레스'를 부본으로 인공교배하여 2001-2002년에 271개체의 실생을 획득하여 이들을 대상으로 2003-2006년까지 3차에 거쳐 특성검정을 실시한후 최종선발된 '원교D1-72'를 "피치푸딩"으로 명명하였다. "피치푸딩"의 화색은 오렌지색으로 RHS 칼라챠트번호 25A로서 '뉴미라클' 23A 보다 약간 연한 오렌지색을 나타내었다. 화형은 중심이 높은 고심형의 화형이며 약간 향기를 가지고 있는 것이 '뉴미라클'과 다른 점이었다. 꽃잎수는 38.6개이며 화폭은 8.7 cm로 '뉴미라클'보다 약간 작았다. 10a 당 년간 절화수량은 113.1본이며 절화장은 60.6 cm 절화경경은 6.1 mm였고 절화수명은 12.8일 정도를 나타내었다.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.98-105
• /
• 2019

In order to improve the fuel economy and dynamic behavior of automobiles, the weight reduction tendency of automobile parts is obvious. Also, in order to maximize assembly and maintenance convenience, various parts are integrated and modularized. Multi-piece methods require many manufacturing processes and become a factor of lowering the strength of parts. It is advantageous to overcome the disadvantages by integrally manufacturing to reduce the processing steps and ensure the strength of the parts. However, when it is necessary to process in a narrow space inside the part, it is impossible to process with the existing spindle. The angle head spindle is only a component of a machine tool, but it is a core part that requires high technology and is highly utilizable in products requiring high precision machining. Therefore, various and continuous studies needs for angle head spindles in areas such as vibration absorption, operational safety, excellent dimensional stability, and strength. In this paper, we propose an optimal design for angle head spindle by performing structural analysis and shape optimization for angle head spindle gear and case.