• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1279-1285
• /
• 2010

Our country has a tendency to build many structures by cutting mountainous areas due to geographical features. Among these construction done in our country, road construction take the first spot in rank. As the construction is done, fractured inclining plane is created inevitability because of the natural properties of mountainous areas. The stability of the fractured inclining planes and slope formed in the opening, which are developed at the time of construction, need to be evaluated. Also, reinforcement plans for these matters are necessary. This paper is to go through an examination on the fractured inclining surface that is developed at the time of construction, especially the composite inclining plane that consists of soil and rocks. Furthermore, evaluating the stability by performing an analysis on stereographic projection and limit equilibrium, based on the examination results. using the stability evaluations, applications were explored for reinforcement methods of construction that fits the geological characters of this inclining surface.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.51-60
• /
• 2006

At new constructing national road, a cutting slope was surveyed and gotten face mapping for three months. The slope is composed of gray phyllite and coaly slate which is the Chang-ri Formation, Okcheon system. The slope angle is 40 degree and the direction is NNE. The attitude of schistosity is $260^{\circ}/45^{\circ}$. So the slope direction is nearly parallel to the schistosity. This is the reason that the slope is very unstable. On the other hand, the very unstable slope is caused by the direction of the schistosity and the slope. First month the coaly slate was slided through the schistosity plane about 10cm. However, three months late the displacement was 2m maximum.

• Journal of computational fluids engineering
• /
• v.5 no.2
• /
• pp.9-19
• /
• 2000

Transient aerodynamic response of an airfoil to a moving plane-flap is numerically investigated using the two-dimensional Euler equations with conservative Chimera grid method. A body moving relative to a stationary grid is treated by an overset grid bounded by a 'Dynamic Domain Dividing Line' which has an advantage for constructing a well-defined hole-cutting boundary. A conservative Chimera grid method with the dynamic domain-dividing line technique is applied and validated by solving the flowfield around a circular cylinder moving supersonic speed. The unsteady and transient characteristics of the flow solver are also examined by computations of an oscillating airfoil and a ramp pitching airfoil respectively. The transient aerodynamic behavior of an airfoil with a moving plane-flap is analyzed for various flow conditions such as deflecting rate of flap and free stream Mach number.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.697-708
• /
• 1995

For many practical optimization problems where the system components are stochastic, the objective functions can not be represented analytically. Furthermore, many of these problems are characterized by the presence of multiple and conflicting objectives. In this research, we introduce a new algorithm through an interactive cutting plane method for solving this multi-criteria simulation optimization problem. Then a turning process is evaluated through the proposed algorithm.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.227-236
• /
• 1996

In this paper an algorithm based on cutting plane approach is developed which constructs all the efficient p-tuples of multiobjective integer linear fractional programming problem. The integer solution is constrained to satisfy and h out of n additional constraint sets. A numerical illustration in support of the proposed algorithm is developed.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.122-133
• /
• 1999

Overlap, excessive wide gaps, and errors between blocks during erection process increases cost and man-hour. In this paper, a system to simulate the assembly process is suggested and a plane block assembly of welding deformation with gravity is simulated in consideration of assembly order, deformations and errors occurring in the cutting and forming processes are not considered and welding deformations are acquired by equivalent stiffness and load method from experiments and hull double bottom plane block is assembled on a assembly order by panel method. It is certified that according to the order of assembly, intermediate product shape affects rigidity which affects welding deformations. Assembly order must be considered in the assembly process. It is certified that the gravity has important role in the assembly process.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2015

This paper describes the development of force limiting device(FLD). The FLD could induce compressive yield before occurring elastic buckling for slender member under compressive load. Therefore, it might prevent reduction of load carrying capacity by elastic buckling and the structures with the devices would behave stable. A new type of FLD reduced cross area is proposed in this study different to existing studies like as out of plane type, slit type and folded plate type. The parameters of specimens are depth, width and number of cutting. The structural capacity and characteristics of proposed types were verified by experiment and FEM analysis. The FLD of cutting type is efficient in compressive member.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.217-224
• /
• 2016

In this study, performance of a developed automatic punching machine considering the planting density of soybeans was evaluated in the case of the operation speed of 0.18-0.28 m/s. The performance demonstrated a rate of 320-500 ㎡/h, 260-400 ㎡/h, and 210-330 ㎡/h for the 0.20 m, 0.25 m, and 0.30 m soybean planting density, respectively. One hundred percent punching capacity was confirmed in 30 mm distance between the ground and the blade. Additionally, in the 50 mm distance condition, the performance of round, square, and hexagonal blades were observed in the range of 16.7-25.2%, 33.0-42.3%, and 54.5-100.0%, respectively. Above all, the hexagonal blade with a 60° edge angle had the most superior cutting quality demonstrating a smooth and soft cutting plane of the plastic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1871-1878
• /
• 2014

PMMA (Polymethyle-methacrylate) optical components have recently been increasingly used as one of the important part of the high precision equipments. This research presents comparatively the surface preparation of light incident plane, LIP (Light Incident Plane) of LGP (Light Guide Panel) by end milling, high speed shaping, and vibration assisted high speed shaping. From several experiments, the results show that the surface quality was improved in high speed shaping and the vibration assisted HSS show not only decreasing waviness and breakage also raising the straightness property. For applying high speed shaping and vibration assisted HSS, an additional tool post was developed and experimentally used.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.303-310
• /
• 2015

Game technologies are now applied in various engineering areas such as the simulation of surgical operation or the implementation of a cyber model house. One of the essential and important technology in these applications is cutting of the 3D polygon model in real time. Real-time cutting technology is an essential technology needed to implement the simulation of a building demolition or a car assembly for training or educational purpose. Previous cutting method using the conventional BSP-Tree structure has some limitations in that they divide the whole world including the 3D model and its environment, only into two parts with respect to an infinite plane. In this paper, we show a technique cutting the 3D model in a finite extent in order to solve this problem. Specifically, we restricted the cut surface in a finite rectangular area and constructed the mesh for the divided surface. To show the usefulness of our partial cutting technique, an example of the dismantling process simulation of a nuclear reactor polygon model was illustrated.