• 한국산업융합학회 논문집
• /
• 제5권4호
• /
• pp.373-378
• /
• 2002

This paper presents a method to predict tool deflection induced by the thermal distribution and the cutting force using FEM in milling operation. The thermal distribution of cutting tool was predicted using FEM after measuring the temperature of the end of tool and of the tool holder. The thermal deflection of cutting tool was predicted using FEM as well. The tool deflection induced by the cutting force was analyzed with the solid model of cutting tool. An end mill tool caused most of tool deflection comparing to tool holder. Most of thermal deflection came from Z-direction and most of tool deflection induced by the cutting force came from X and Y direction. Precision cutting will be accomplished when tool locations are generated considering the thermal deflection of cutting tool and the tool deflection induced by the cutting force in CAD/CAM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.943-946
• /
• 2002

This paper presents atomization characteristics of cutting fluids. To analyze the behavior characteristics of cutting fluid, analytical approach and experimental measurement were performed to predict the aerosol size, velocity and concentration due to cutting fluid atomization mechanism in machining operation. The established analytical model which is based on atomization theory analyzes the cutting fluid motion and aerosol generation in machining process. The predictive models can be used as a basis for environmental impact analysis on the shop floor. It can be also facilitate the optimization of cutting fluid usage in achieving a balanced consideration of productivity and environmental consciousness.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권1호
• /
• pp.49-55
• /
• 2003

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors and effectiveness in machining process. The cutting fluid improves the productivity through cooling, lubricating effects, however its environmental impact also increases according to the cutting fluid usage. The primary mechanism in this study is the spin-of motion of cutting fluids away from the rotating workpiece. In this study some machining parameters are adopted to analyze the productivity as well as environmental impact. This study provides the criteria for the resonable cutting fluid usage quantitatively to develop the environmentally conscious machining process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.651-654
• /
• 2001

In the dismantling process of nuclear spent fuels, the spent fuel rod cutting process, followed immediately by the decladding process, performs the cutting the spent fuel rods to a proper length for fast decladding operation. In this paper, we analyzed the chemical compositions, mechanical properties, and physical characteristics for SUS and zircaloy tubes in order to identify the feasibility of cutter-blade type in cutting SUS and zircaloy tubes. It is considered that material, shape and angle, and heat treatment for fabricating the highly durable cutter blade and also it is investigated that the round-shape sustenance of cross-section, amount of debris production, and fire occurrence for measuring the cutting performance on SUS and zircaloy tubes, spent fuel rod cutting device is designed to be operated automatically through the remote control system for use in Hot Cell(radioactive) area and the electro-driven mechanical parts are modularized for easy maintenance. Results from various experiments confirm the efficiency of this device.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.399-407
• /
• 2001

The Surface, generated by end milling operation, is deteriorated by tool runout, vibration, friction, tool deflection, etc. Especially in cornering cut, surface accuracy is usually determined by varying cutting forces, which causes tool deflections. Cutting conditions like feed rate is usually kept constant during machining a part, which causes dimensional error in severe cutting. Cornering cut is a typical example of deterioration of surface accuracy when constant feed rate is applied. Therefore it becomes important to develop NC post processor module to determine optimal cutting conditions in various cutting situations. In this paper, cutting force is predicted in cornering cut with flat end mill and feed rate is determined by constraining constantly resultant force. Also some control characteristics of CNC machining center are evaluated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.519-524
• /
• 2000

This paper presents a study of surface roughness prediction model by experimental design in turning operation. Regression analysis technique has been used to study the effects of the cutting parameters such as cutting speed, feed and depth of cut on surface roughness. The experiment has been conducted using coated tungsten carbide inserts without cutting fluid. The reliability of the surface roughness model as a function of the cutting parameters has been estimated. The results show that the experimental design used in cutting process is a method to estimate the effects of cutting parameter on surface roughness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.451-456
• /
• 2004

The Titanium has many superior characteristics Which are specific strength, heat resistance, corrosion resistance, organism compatibility, non-magnetic and etc. and their quantity are abundant this study performed turning operation of Ti-6Al-4V alloy using the TiAlN Coate Tool which treated PVD (Physical Vapor Deposition). Experimental works are also executed to measure cutting force, chip figuration and surface roughness for different cutting conditions. As a result of study. Tool wear was serious at over 100m/min of cutting speed and cutting condition was excellent at 1.0mm of cutting depth.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.34-37
• /
• 2006

As part of an effort to systematize the operation planning for cutting processes, the neural network method has been applied to model the process of selecting cutting conditions and subsequently to arrive at effective and safe cutting conditions through learning during training of the model. New cutting conditions that are more effective and safer for the given circumstance are obtained. The proposed algorithm deletes the old information previously learned, and then makes the network make at improvement by learning. As a result, the new algorithm provides useful cutting conditions for safer manufacturing environments. A variety of simulation cases illustrate the performance of the proposed methodology. The simulation results are provided and discussed.

• 방사성폐기물학회지
• /
• 제7권2호
• /
• pp.115-124
• /
• 2009

극저온 절단 기술은 절단 과정에서 2차 폐기물이 발생되지 않기 때문에 원자력 시설의 해체기술로 가장 적합한 기술 중 하나이다. 본 논문에서는 SPH 기법과 FEM 기법을 혼합한 하이브리드 기법을 이용한 컴퓨터 시뮬레이션을 통해 극저온 절단 기술의 적용성을 파악하였다. 또한 극저온 절단 시스템의 설계에 활용하기 위해 절단 깊이 예측식을 사용하여 스틸 10 mm 두께를 절단하는데 필요한 설계 변수 및 운전조건을 도출하였다. 마지막으로 도출한 설계변수 및 운전조건을 기반으로 극저온 절단 시스템의 주요 부품을 제작하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.858-861
• /
• 2000

This paper presents the characteristics of cutting fluid atomization due to its application method. In this study three different application methods; nozzle, jet, mist type is adopted for evaluating the cutting fluid's effect in terms of machinability and environmental consciousness. Cutting fluids are widely used to cool and lubricate the cutting zone in machining process. Cutting fluids mist via atomization in spin-off process can be affected to health risk. To satisfy the increasing concern of health and environment problem and keep the machinability or productivity it is necessary to establish the resonable strategy of cutting fluid usage and optimal control. Tool wear and cutting fluid diffusion rate in the air were measured as machinability index and environmental index in a few turing operation. Through this basic approach it can be also provide the optimization of cutting process and improvement of machine tool design in achieving environmentally conscious machining.