• 한국건설관리학회논문집
• /
• 제12권2호
• /
• pp.12-20
• /
• 2011

최근 국가경제규모의 성장과 더불어 단위 건설현장의 규모도 대형화, 복합화되어 가고 있다. 이에 건설시장은 공기단축, 원가절감, 품질개선을 요구하게 되었고, 보다 효율적인 프로젝트 관리를 위해 첨단기술을 적용한 연구가 다양하게 진행되고 있다. 특히, 건설현장의 인력, 자재, 장비 등의 다양한 자원에 대한 실시간 위치추적기술인 RTLS기술은 안전관리에 효과적인 것으로 평가받고 있다. 하지만 건축공사 뿐만아니라 해양, 도시 및 타 산업분야에서 연구와 적용이 이뤄지는 것과는 달리 협소하고 위험요소가 많은 터널공사에 대한 연구는 거의 전무한 실정이다. 따라서 본 연구에서는 RTLS기술을 이용한 터널현장에서의 안전관리를 위한 모델을 제시하고, 이의 현장적용성 검토를 실시하였다. 적용성 검토 결과, 제시된 모델은 발생되는 일부의 오차로 인해 현장에 바로 적용하기 힘드나 하드웨어기술의 발전과 위치보정에 대한 노력으로 극복할 수 있을 것으로 판단된다. 본 연구를 통해서 토목분야의 효율적인 프로젝트관리는 물론 안전관리의 방향을 제시하는데 이바지할 것으로 사료된다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제24권6호
• /
• pp.441-452
• /
• 2020

In vivo animal models are limited in their ability to mimic the extremely complex systems of the human body, and there is increasing disquiet about the ethics of animal research. Many authorities in different geographical areas are considering implementing a ban on animal testing, including testing for cosmetics and pharmaceuticals. Therefore, there is a need for research into systems that can replicate the responses of laboratory animals and simulate environments similar to the human body in a laboratory. An in vitro two-dimensional cell culture model is widely used, because such a system is relatively inexpensive, easy to implement, and can gather considerable amounts of reference data. However, these models lack a real physiological extracellular environment. Recent advances in stem cell biology, tissue engineering, and microfabrication techniques have facilitated the development of various 3D cell culture models. These include multicellular spheroids, organoids, and organs-on-chips, each of which has its own advantages and limitations. Organoids are organ-specific cell clusters created by aggregating cells derived from pluripotent, adult, and cancer stem cells. Patient-derived organoids can be used as models of human disease in a culture dish. Biomimetic organ chips are models that replicate the physiological and mechanical functions of human organs. Many organoids and organ-on-a-chips have been developed for drug screening and testing, so competition for patents between countries is also intensifying. We analyzed the scientific and technological trends underlying these cutting-edge models, which are developed for use as non-animal models for testing safety and efficacy at the nonclinical stages of drug development.

• 한국토양비료학회지
• /
• 제46권2호
• /
• pp.81-86
• /
• 2013

For organic farming, green manure crops such as leguminous forages and barley have been broadly used to improve soil fertility and soil physical and chemical properties by repeatedly cutting and mulching them directly as winter crop in the field in the rotation. In this investigation we selected 78 agricultural farm corporations as well as individual organic farmhouses related to crop rotation from greenmanure crops to main crops in order to analyze the relationship of cropping system between main crops and green manure crops. The results showed that the green manure crops were divided into two groups as leguminous and nonleguminous crops, representing that those are limited to specific climate and farming systems of regions. Also the 10 or less green manure crops including sudangrass, hairyvetch, italian ryegrass, sorghun, buckwheat, oat, pea, rye, clover, and canola which belong to leguminous crops which are presently cultivated from the organic farmhouses within the rotational crop system. We also confirmed that the major main crops are sweet potato, soybean, corn, tobacco, spinach from usage frequency analyzed by NetMiner H 2.6 which was used to estimate the rotational cropping system among the green manure crops and main crops.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.611-619
• /
• 2008

본 논문에서 구현한 2.5D 맵핑(mapping) 시스템은 다양한 질감과 패턴에 따른 패션 의상의 모델 사진 이미지를 그대로 살려 외각선 영역 위에 드레이핑(draping)함으로써 새로운 디자인을 창출할 수 있고, 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인할 수 있다. 또한 원단 디자인과 최종 제품의 상태를 정확하게 예측할 수 있는 기능을 제공하며, 원단과 모델 사진 이미지의 데이터베이스 구축으로 쉽고 빠르게 드레이핑함으로써 패션 업계의 경쟁력 향상과 비용 절감 효과를 가져 올 수 있다. 2.5D 맵핑 시스템은 보다 자연스러운 드레이핑을 위하여 메쉬 워프 알고리즘 모듈, 명암 추출과 적용 모듈, 맵핑 영역 추출 모듈, 메쉬 생성과 변형 모듈, 2.5D 맵핑 모듈로 구성하여 구현하였다. 향후 연구과제는 2.5D 맵핑 시스템의 구현 기술을 기반으로 하여 3D 의복 기술과 3D 인체 구현 기술을 접목한 3D 패션 디자인 시스템을 연구하여 2.5D 맵핑 기술의 표현 한계를 극복할 계획이다.

• 산업경영시스템학회지
• /
• 제42권1호
• /
• pp.64-73
• /
• 2019

The manufacturing companies under Make-To-Order (MTO) production environment face highly variable requirements of the customers. It makes them difficult to establish preemptive production strategy through inventory management and demand forecasting. Therefore, the ability to establish an optimal production schedule that incorporates the various requirements of the customers is emphasized as the key success factor. In this study, we suggest a process of designing the simulation model for establishing production schedule and apply this model to the case of a flat glass processing company. The flat glass manufacturing industry is under MTO production environment. Academic research of flat glass industry is focused on minimizing the waste in the cutting process. In addition, in the practical view, the flat glass manufacturing companies tend to establish the production schedule based on the intuition of production manager and it results in failure of meeting the due date. Based on these findings, the case study aims to present the process of drawing up a production schedule through simulation modeling. The actual data of Korean flat glass processing company were used to make a monthly production schedule. To do this, five scenarios based on dispatching rules are considered and each scenario is evaluated by three key performance indicators for delivery compliance. We used B2MML (Business To Manufacturing Markup Language) schema for integrating manufacturing systems and simulations are carried out by using SIMIO simulation software. The results provide the basis for determining a suitable production schedule from the production manager's perspective.

• Earthquakes and Structures
• /
• 제17권2호
• /
• pp.175-189
• /
• 2019

The aim of the study is to show the results of complex shaking table experimental investigation focused on the response of two models of cylindrical steel tanks under mining tremors and moderate earthquakes, including the aspects of diagnosis of structural damage. Firstly, the impact and the sweep-sine tests have been carried out, so as to determine the dynamic properties of models filled with different levels of liquid. Then, the models have been subjected to seismic and paraseismic excitations. Finally, one fully filled structure has been tested after introducing two different types of damages, so as to verify the method of damage diagnosis. The results of the impact and the sweep-sine tests show that filling the models with liquid leads to substantial reduction in natural frequencies, due to gradually increasing overall mass. Moreover, the results of sweep-sine tests clearly indicate that the increase in the liquid level results in significant increase in the damping structural ratio, which is the effect of damping properties of liquid due to its sloshing. The results of seismic and paraseismic tests indicate that filling the tank with liquid leads initially to considerable reduction in values of acceleration (damping effect of liquid sloshing); however, beyond a certain level of water filling, this regularity is inverted and acceleration values increase (effect of increasing total mass of the structure). Moreover, comparison of the responses under mining tremors and moderate earthquakes indicate that the power amplification factor of the mining tremors may be larger than the seismic power amplification factor. Finally, the results of damage diagnosis of fully filled steel tank model indicate that the forms of the Fourier spectra, together with the frequency and power spectral density values, can be directly related to the specific type of structural damage. They show a decrease in the natural frequencies for the model with unscrewed support bolts (global type of damage), while cutting the welds (local type of damage) has resulted in significant increase in values of the power spectral density for higher vibration modes.

• 지질공학
• /
• 제30권4호
• /
• pp.447-456
• /
• 2020

연구지역인 강원도 삼척시 도계읍의 사면은 지형변화가 발생하는 지역으로 2009년 사면 절취공사를 수행하여 사면경사완화공법이 적용되었다. 하지만 사면의 상부에 위치한 폐석적치장의 영향으로 2개월 뒤 절취사면의 상부를 확장하여 안정성을 도모하였다. 최근 사면 하부에 위치한 옹벽의 배부름 현상이 발견되고 절취사면의 균열이 나타나 지형변화가 다시 발생하고 있는 것으로 보이고 있다. 이러한 문제를 파악하기 위하여 본 연구에서는 UAV를 이용하여 사진측량을 수행해 지형변화가 발생하는지 확인하고자 하였다. 2019년 4월과 10월 각각 정사영상을 추출하고 Digital Surface Model(DSM)를 추출하여 고해상도의 지형변화를 비교 분석하였다. 10월의 지형은 4월의 지형형상을 그대로 유지한채 앞으로 밀려 나간 모습을 보여 이러한 지형변화는 땅밀림인 것으로 분석하였다.

• 한국전산구조공학회논문집
• /
• 제35권3호
• /
• pp.175-182
• /
• 2022

부분구조화 기법은 자유도가 많고 복잡한 구조물의 유한요소 해석 모델 단순화에 효율적으로 적용될 수 있는 기법이다. 대표적으로 선형 문제에 대해서는 Craig-Bampton method 등이 있다. Craig-Bampton method는 경계 요소를 제외한 나머지 요소의 불필요한 자유도를 제거함으로써 선형 구조물의 축소를 수행한다. 최근에는 부분구조화 기법과 더불어 구조물의 최적설계를 위해 멀티레벨 최적화 기법이 많이 활용되고 있다. 시스템의 목표를 달성하기 위해 각 부구조에 새로운 목표를 할당하는 기법이다. 본 연구에서는 유전자 알고리즘을 이용하여 시스템 목표 달성을 위한 각 부구조별 내부 자유도 개수를 새로운 목표로 할당하고 최적화를 수행하였다. 최적화 절차로부터 도출된 부구조별 내부 자유도 개수를 이용하여 시스템의 축소를 수행하였다. 다양한 수치예제들을 통해 축소 모델에 대한 결과를 확인하였으며, 90% 이상의 정확도를 가지는 것을 확인하였다.

• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.265-281
• /
• 2022

A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1028-1035
• /
• 2005

Traditional Industries were planning the major role for Taiwan's economy. However, we need to face the competition from developing countries. Moving manufacturing department to other low salary countries, such as China, can only temporarily release some limited pressure. The final and complete solutions are to equip on R&D, refine techniques, improve management capabilities, upgrade business, and reform physique. Currently there are some ERP systems on the market; however, they are designed for common purpose and difficult to introduce into industry. The expensive price is another factor to make them be popular. In this research we will Object Oriented, Visual Modeling, ER Model and Windows Environment to develop an Integrated Management System for Sports Requisites Industries (IMSSRI). We will integrate all information from all departments such as development, business, material administration, manufacture, shipping, and financial. When development people construct the all modules, components, cutting molds, materials and accessories, IMSSRI will calculate all needed materials and cost for each product. This cost will be used for quotation to report to our customers. When customers confirm the order, system will transfer all necessary materials into Material Administration System. IMSSRI can generate manufacturing forms and material raw lists for manufacture department. All related information such as stocking, returning goods, material requesting, and material returning can be integrated so we can control all details of the whole enterprise. Through the help of this system, we hope we can save man-power, reduce human mistakes, raise management capabilities for tradition manufacturing industries and create another possibility of eternal operating for Taiwan's Industries.