• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.529-535
• /
• 2009

One of the most important things in shipbuilding is to select light and high tensile strength materials. Therefore, the use of Al alloy in shipbuilding become an increase. In cutting the aluminum plate, the quality of the cut surface is strongly influenced by the cutting conditions such as cutting speed, kerf width, plate thickness, cutting materials, and applied gas pressure. The cutting experiment of Al alloy plate(5083) were carried out using LASER cutting machine. The upper and lower of kerf width, the surface roughness(Ra, Rmax) of cut surface were measured under various cutting conditions. The morphologies of cutting surface were also monitored at various cutting conditions. The optimum cutting conditions of Al alloy among tested were indicated.

• Korean Journal of Organic Agriculture
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1994

This experiment was conducted to investigate the effects of mixed application of earthworm cast and N-fertilizer on dry matter(DM) yield in orchardgrass(Dactylis glomerate L.). Experimental plot were designed by a randomized block design with 3 replications of six different treatments-Control(0:0), 100% earthworm cast(0:100), 3 levels of mixed application(25:75:, 50:50, 75:25) of earthworm cast and N-fertilizer, and 100% N-fertilizer(100:0)based on content (%) of nitrogen. The experiment was carried out from March to October, 1993, on the forage experimental field of Kon-Kuk Univ. in Seoul. The results obtained are summarized as follows: 1. Annual dry matter yield was significantly increased according to increasing of N-fertilizer 2. Dry matter yield for each treatment as cutting time was passing was decreased. However, dry matter yield was slightly increased at 75%, 50%, and 25% mixed application of earthworm cast at the third cutting time than the second cutting time(p<0.05). 3. concerning each treatment per cutting time, dry matter yield was higher at 100% N fertilizer than the other treatments at the first, second, and fourth cutting time except the third cutting time only(p<0.05). And according to decreasing of mixing ratio of N fertilizer, dry matter yield was decreased, too. 4. Dry matter yield of 100% earthworm cast was significantly higher than control at the fourth cutting time(p<0.05).

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.144-149
• /
• 2008

This study presents the selection of cutting conditions in high speed pipe cutting machine for the better quality. A high speed pipe cutting machine which uses a rotary knife can make good quality products in short time. But, the machine is much sensitive by cutting conditions because of the complicated mechanism. In this reason, many experiments for cutting condition selection are necessary to improve quality of production. This study carried out cutting experiments with the three factors that are cutting RPM, cutting force and pooling force. 2-dimensional profile measuring instrument is used to measure which is represented by ${\Delta}h$, a sum of burr and collapse height. The effects of factors are analyzed by using MINITAB, the commercial software.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.1
• /
• pp.55-60
• /
• 2000

This experiment was carried out to determine the effect of cutting frequency(3rd and 5th cut) and level of nitrogen fertilization(l50 + liquid manure, 300 and 450kgha) on growth characteristics, dry matter yield and nutritive vaule of reed canarygrass(Pha1aris arundinacea L.), at the forage experimental field, College of Agriculture and Life Sciences, SNU, Suweon. Plant height of 3rd cutting(79.2cm) was significantly higher than that of 5th cutting(58.0cm). And dry mattter yield of cutting frequency was observed in 3rd cutting(16,902kgPna) and 5th cutting(l7,833kg/ha) As the nitrogen fertilization was increased, DM yield was significantly increased(p<0.05). When the nitrogen fertilization was applied at the level 150 + liquid manure, 300 and 450kg, dry matter yields were 16,5 12, 17,123 and 18,368kg/ha, respectively. The contents of neutral detergent fiber(NDF), acid detergent fiber(ADF) and in vitro dry matter digestibility(1VDMD) were similar among cutting frequency. However, slightly higher NDF, ADF and IVDMD contents were found in 5th cutting, but there was not affected by nitrigen fertilization. Based on the results of this experiment, it were indicated that to 5th cutting and 450kg nitrogen fertilization could be obtained from the increase of dry matter yield and nutritive value (Key words : Cutting frequency, Nitrogen fertilization, Dry matter yield, Nutritive Value, Reed canarygrass)

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.498-506
• /
• 2009

An experimental study was performed to select cutting parameters for better quality-products in hard metals such as steels. Usually, a hard metal can be cut with a rotary cutting knife and the process provides a good cutting quality result. However, the cutting machine is much sensitive in cutting conditions because of its complicated mechanism. By this reason, careful processing conditions must be taken to improve the quality of the products. This experimental study for better quality products with a rotary cutting knife was carried out with two main factors; cutting speeds and cutting and pooling forces. A two-dimensional profile measuring instrument is used to evaluate its cutting faces and the effects of processing factors are analyzed by a commercial software.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.241-246
• /
• 1996

This Experiment was conducted to know effect of cutting times and nitrogen split application rates on shoot and root-related characters of Atractylodes japonica. The cutting time was forced on none, once and twice along with three levels of nitrogen split application, all basic 50 -30 -20% and 40 -30 -30%. The plant height declined with increased cutting time and dry matter weight was increased with nitrogen split application under none and once cutting. Average yield of cutted shoot as edible wild plant was 257kg/10a at once cutting condition, but twice cutting condition was little and unfavorable to use edible wild plant because shoot was coarse. Yield 0 dry rhizome was the highest at once shoot cutting und­er 50 -30 -20% nitrogen split application by 471kg/10a.Especially, culture of Atractylodes japonka needed once shoot cutting one the 10th-30th of May.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.419-429
• /
• 2009

This study focuses on the effect of the cutting order of prestressing strands on the strain change in the strands and on the state of stress of concrete, experimentally and numerically. In the experiment, strain of strands and of transversal reinforcement were measured for three different cutting orders during detensioning process by using flame-cutting procedure. The experimental results were compared with those obtained from the FE analysis. As a results of the experiment, it is confirmed that the cutting order of prestressing strands affected on the strain of strands as well as of transversal reinforcement. The FE analysis gave similar results to those obtained from the experiment. Therefore, the cutting order should be chosen appropriately to when the strands get detensioned.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.8-13
• /
• 2005

This study proposes the construction of 2-3 dimensional attractor system for cutting characteristics evaluation of metals. Also this paper aims to find the optimal cutting conditions of diamond turning machine by measuring surface form and roughness to perform the cutting experiment of metals, which are aluminum, with diamond tool. As well, according to change cutting conditions such as feed rate, using diamond turning machine to perform cutting processing, by measuring cutting force and surface roughness and according to cutting conditions the aluminum about cutting properties. Trajectory changes in the attractor indicated a substantial difference in attractor characteristics. Constructed 2-3 dimensional attractor system in this study can be used for cutting characteristics evaluation of metals.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.4
• /
• pp.30-42
• /
• 1986

On the analysis of cutting mechanics in orthogonal cutting, each cutting force component can be predicted. By adding the flank face wear term to the prediction equation for cutting force components, complete equations are obtained. Using these equations, it is shown that cutting force components are increased linearly as flank face wear land is developed, in theory and experiment. By making non-dimensional term ie. Fv/Fc, the width of variation of output signal Fv/Fc is greately decreased compared with each cutting force component as cutting condition is varied. Among these conditions, the variation of chip width in the range of more than 1mm and that of cutting velocity have little effect on the output signal Fv/Fc, that of Flank face werr land can be detected without difficulty.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.71-79
• /
• 1994

The aim of this study is to analyze the behavier of SUS 304 during the cutting process and the resulting cutting temperaturce. Since SUS 304 is a difficult-to-machine material, tool damage is largely affected by the suitability of cutting conditions. Therefore, in varying such cutting conditions, the experiment investigates the relations between cutting temperature and tool wear during the cutting process. All the cutting temperature data were manipulated successfully, and the tool temperature distributions were analyzed by a finite element method based on the acquisition data. In the results, the characteristics of cutting temperature are related to the difficulty of machining characteristics.