• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.242-248
• /
• 2017

This study was conducted to develop a cylindrical paperpot manufacturing equipment which is capable of continuously producing paperpots with a constant size. The equipment consists of the soil supply part, the paper supply part, the pot manufacturing part, the paperpot cutting part and its process for manufacturing paperpot from the soil supply to the paperpot cutting is continuously performed. As a result of the performance test using this equipment, we suggest that the optimal moisture content and injection pressure to supply soil are 50%~60%, and 0.5 Mpa respectively. Moreover the appropriate temperature for adhesive strength is $150{\sim}160^{\circ}C$ taking into account the performance of device and adhesion time. Also, considering the cutting speed and safety, it is appropriate to adopt a straight blade having a clean plan at a minimum angle of $30^{\circ}$. In addition, the manufacturing capacity of the developed equipment was 3300 pots per hour.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.25-37
• /
• 2010

This study is aimed at enhancing mobility rights for the transportation underprivileged that has been made light of relatively compared to normal people. In order to do this, we've suggested having ITS (Intelligent Traffic System) built and improving satisfaction through the test operation of its main system. The existing sound signal device for the visually handicapped has one problem with managing it. Because, the people in charge of it had to visit each problematic site directly to maintain and fix some problems every time it was out of order. Moreover, it couldn't provide sustainable services about voice guidance and the visually handicapped had to control it by either confirming the location of buttons that were installed on the pillar of traffic light and then pressing one of them or using a remote controller on their own. In order to improve such inconveniences, we have created a new typed sound signal device for the visually handicapped by applying the cutting-edge wireless technology based on ergonomics considering actual road situations. Such technology enables it report the status of signal device and light to them by using its voice guidance system automatically every time they have access to it. Additionally, we've already introduced it to a couple of test areas and then known the fact that they recognized traffic situation more conveniently and safely compared to the existing sound signal device. That is above average in terms of satisfaction. In addition to that, we've provided LTS (Location Tracking System - Location-based service intended for elementary students) by utilizing the existing wireless infrastructure and founded the fact that about 87% of their parents were satisfied with the service based on LTS.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.19-26
• /
• 2009

The microwave exposure device for microwave breast cancer detection consists of RF transceiver and several antennas. The microwave information of object acquired from the microwave exposure device can be calculated permittivity and conductivity by using the inverse scattered analysis. In this paper, we have developed the software for detecting breast cancers based on microwave tomography, by which users not only can check out the existence of breast cancers through the permittivity and conductivity information analysis of the object's internal, but also can analysis easily information for distribution of breast cancers. The developed software provides the function for visualizing the captured permittivity and conductivity information as 2D or 3D color images on which users can easily detect the existence of breast cancers. For more detailed analysis of tomography images, the proposed software also has provided the functions for displaying their cutting profiles as well as position and size information of special area in them.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.7-13
• /
• 2020

For one decades, mobile devices components were made with plastic material, but environmental problems have recently replaced them with metal materials such as aluminum. Generally, aluminum components are mostly produced through cutting, but this process has limitations such as productivity and chip recycling. For this reason, many researches are conducted to improve productivity by replacing with the forging press process for manufacturing mobile device components. After forging process, the flash is remained and it is necessary to eliminate the flash from the final shape of components. In this paper, one-sided clearance for blanking aluminum material wes selected for parameter affected to the dimensional precision. Because the clearance is the most important parameter in blanking process. Deriving the clearance of blanking process for high dimensional precision, five level of one-sided clearance is selected and CAE is used to analyze the dimensional precision for each case.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.217-223
• /
• 2008

In this study, a garlic clove planter which is capable of planting holes in soil and planting a clove at the same time was designed and tested for film mulched beds. Planting characteristics of the planter were measured through field experiment. Some characteristics were analyzed with multibody dynamic simulation software. Simulation was performed on opening time of the planting hopper. Measured characteristics were position, angle, and reposition amount of garlic in sowing hole. Experiment results showed that the planted position of garlic in planting was 23.0 mm from the hole wall. The reposition amount of garlic was varied with its position and angle when the planted garlic was pressed by an angled compaction wheel. In case of type II position, the position movement of garlic was larger than type I. Average position movement of type II was 11.5 mm at $20^{\circ}$ of compaction wheel angle. These data suggest that cutting diameter of film opening must be larger than 33 mm to provide enough space for garlic sprouting. Also, simulation results showed that the maximum opening time of the planting hopper was 0.26 second.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2002

This paper - following 'Development of multi-purpose marine waste cleaning systems for the shallow waters (Part I : preliminary conceptual design)'- describes on the system development and the sea trial performance evaluation(Cho[2003]). The multi-functional seabed waste collecting system and the towing hook system were developed. The maximum working depth of these systems are 15 and 100 meters, respectively(MOMAF[2001]). For the multi-purpose use to collect the marine waste, this system contains floating waste collecting device for the waste on seawater and remained waste collecting device for the waste on seabed, while steel wire cutting system is added for higher efficiency In order to evaluate the system performance, the prototype of multi-functional system was constructed and the sea trial test at shallow water were carried out. As a result, this system operated well with safe and without any interaction so that the developed systems are practicable and applicable.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1344-1368
• /
• 2007

The Advanced countries including Japan, USA and European countries are adopting automatic system(e.g., auto-measurement using CCD camera) for measuring pantograph sliding plate and wheel abrasion to minimize manpower for E.M.U(Electric Multiple Unit) inspection and maintenance as part of management rationalization of railroad Corporation since late 1980's. In Korea, as part of scheme of business rationalization, automatic system for measuring pantograph sliding plate and wheel abrasion started to draw industry attention since late 1990s, and the system started to be installed in newly built depots of Korea Railroad Corporation since 2002. This study hopefully provides the base for realizing business rationalization and applying the advanced technology developed by Korea, the country of powerful IT basis, to overseas railroad organizations by examining automatic system for measuring pantograph sliding plate abrasion using existing CCD cameras produced domestically and in foreign countries to study cases(organizations in Korea) for improvement of measurement, management and inspection of pantograph sliding plate abrasion using CCD cameras with new cutting-edge technology; and by applying the study result to railroad organizations in metropolitan areas in Korea.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1863-1872
• /
• 2006

In FMS (Flexible Manufacturing System) and CIM (Computer Integrated Manufacturing), machine-tools have been the target of integration in the last three decades. The conventional concept of integration is being changed into the autonomous manufacturing device based on the knowledge evolution by applying advanced information technology in which an open architecture controller, high-speed network and internet technology are included. In the advanced environment, the machine-tools is not the target of integration anymore, but has been the key subject of cooperation. In the near future, machine-tools will be more improved in the form of a knowledge-evolutionary intelligent device. The final goal of this study is to develop an intelligent machine having knowledge-evolution capability and a management system based on internet operability. The knowledge-evolutionary intelligent machine-tools is expected to gather knowledge autonomically, by producing knowledge, understanding knowledge, reasoning knowledge, making a new decision, dialoguing with other machines, etc. The concept of the knowledge-evolutionary intelligent machine is originated from the machine control being operated by human experts' sense, dialogue and decision. The structure of knowledge evolution in M2M (Machine to Machine) and the scheme for a dialogue agent among agent-based modules such as a sensory agent, a dialogue agent and an expert system (decision support agent) are presented in this paper, with intent to develop the knowledge-evolutionary machine-tools. The dialogue agent functions as an interface for inter-machine cooperation. To design the dialogue agent module in an M2M environment, FIPA (Foundation of Intelligent Physical Agent) standard platform and the ping agent based on FIPA are analyzed in this study. In addition, the dialogue agent is designed and applied to recommend cutting conditions and thermal error compensation in a tapping machine. The knowledge-evolutionary machine-tools are expected easily implemented on the basis of this study and shows a good assistance to sensory and decision support agents.

• Journal of Internet of Things and Convergence
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2022

The Internet of Things (IoT) provides data convergence and sharing functions, and IoT technology is the most fundamental core technology in creating new services by convergence of various cutting-edge technologies. However, there are different classification systems for the Internet of Things, and when it is limited to the domestic public sector, it is difficult to properly grasp the current status of which devices are installed and operated with what share, and systematic data or research The results are very difficult to find. Therefore, in this study, the relevance of the classification system for IoT devices was analyzed according to reality based on sales, shipments, and growth rate, and based on this, the actual share of IoT devices among domestic public institutions was analyzed in detail. The derived detailed analysis results are expected to be efficiently utilized in the process of selecting IoT devices for research and analysis to advance information protection technology such as responding to malicious code attacks on IoT devices, analyzing incidents, and strengthening security vulnerabilities.