• Journal of Institute of Convergence Technology
• /
• v.6 no.1
• /
• pp.23-26
• /
• 2016

DC motor shafts have several defects such as double cut, deep scratch on surface, and defects in diameter and length. The deep scratches are due to collision among the other shafts. So the scratches are long and thin but their orientations are random. If the smallest enclosing box, i.e. oriented bounding box for a detective point group is found, then the size of the corresponding defect can be modeled as its diagonal length. This paper proposes an suface inspection algorithm for the DC motor shaft using the oriented bounding box. To evaluate the proposed algorithm, a test bed is made with a line scan CCD camera (4096 pixels/line) and two rollers mechanism to rotate the shaft. The experimental result on a pre-processed image with contrast streching algorithm, shows that the proposed algorithm sucessfully finds 150 surface defects and its computation time (0.291 msec) is enough fast for the requirement (4 seconds).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.616-624
• /
• 2006

In this paper, the transfer characteristics of high frequency transmission line having defected ground structure (DGS) and lumped elements are described. When a DGS, which is a kind of periodic structure, is inserted into a transmission line, its equivalent inductance and capacitance elements are added to the characteristics of the standard transmission line. This generates resonance, 3dB cut-off frequency, low-pass, band rejection, and band pass characteristics, and causes a slow-wave and enlarged electrical length of the transmission line. In addition, if the DGS is combined by a lumped element such as resistor, capacitor, and inductor, the resonant and cut-off frequencies moves up or down and other changes occur in the transmission characteristics. The variation of the transmission characteristics is described with the qualitative prediction and measured data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.556-563
• /
• 2006

We should extract lines and data which consist of the table in order to classify the table region and analyze its structure in document image. But it is difficult to extract lines and data exactly because the lines are cut and their lengths are changed, or characters or noises are merged to the table lines. These problems result from the error of image input device or image reduction. In this paper, we propose the better method of extracting lines and data for table region classification and structure analysis than the previous ones including commercial softwares. The prposed method extracts horizontal and vertical lines which consist of the table by the use of one dimensional median filter. This filter not only eliminates the noises which attach to the line and the lines which are orthogonal to the filtering direction, but also connects the cut line of which the gap is shorter than the length of the filter tap in the process of extracting lines to the filtering direction. Furthermore, texts attached to the line are separated in the process of extracting vertical lines. This is an example of ABSTRACT format.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1173-1183
• /
• 1997

In order to flatter the figures of average middle aged women by determining harmonious proportions for their costume forms, this study evaluates effects of varying design details of jackets(coats) with blouses and slacks using a ranking test and paired comparisons test. The result from clothing design C-2 which has the best design effect were as follows; 1. In order to look taller, the jacket(coats) is divided vertical long line and it has the emphasis point close to the face. 2. In order to make shoulder width look wider, armhole seam line attached 1-2 cm from the shoulder point. 3. In order to make chest width look slimmer, division was made up of a tailored collar with a deep V-neckline. 4. In order to make waist circumference look slimmer, the jacket has more fitted waist line than loosed it and tailored collar with a deep V-neckline. 5. In the case of the division of upper and lower garments, when the division was closer to the golden section, i.e., when the jacket hemline is hipline and slacks length is the heel excluded length of shoe heels, the overall appearance was better. 6. The V-neckline looked better, when it was cut along a long acute angle to the waist line. Because of dividing along above factors 1-6 i.e., clothing design C-2 was overall harmonious. Appropriate division of costume forms made for an aesthetic composition, which flattered the body types of middle aged women and presented harmonious, beautiful costume design effects. It made the women look taller, slim and balanced, and highlighted middle aged women's sense of beauty.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.279-288
• /
• 2012

The material removal mechanism in machining is significantly affected by the cutting edge geometry. Its effect becomes even more substantial when the depth of cut is relatively small as compared to the characteristic length which represents the shape and size of the cutting edge. Conventionally, radius or focal length has been employed as the characteristic length with the assumption that the shape of cutting edge is round or parabolic. However, in reality, there could be various ways to determine the radius or focal length even for the same tool edge profile, depending on the region to be considered as cutting edge in the measured profile and the constraints to be set in constructing the best fitted circle or parabola. In this regard, the present study proposes various models to determine the characteristic length in terms of radius or focal length. Their physical compatibility are validated by carrying out 2D orthogonal cutting experiments using inserts with a wide range of characteristic length ($30{\sim}180\;{\mu}m$ in terms of radius) and then by investigating the correlation between the characteristic length and the cutting forces. Such validation is based on the common belief that the larger the characteristic length is, the blunter the cutting edge is and the higher the cutting forces are. Interestingly, the results showed that the correlation is higher for the radius or focal length obtained with a constraint that the center of best fitted circle or the focus of the best fitted parabola should be on the bisectional line of the wedge angle of tool.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.325-333
• /
• 1992

The objectives of this study were 1) to investigate the clothing needs of physically han- dicapped children, 2) to present the basic data to make the slacks patterns which meet the specific needs of physically handicapped children under study. Questionnaires were administered to 38 mothers of handicapped children and the subjects for the wear test were five handicapped children using wheelchair. The fabrics used for slacks wear test were: muslin woven with cotton, stretchable jean woven and double jersey knitted with cotton and polyester fabrics. The results obtained from this study were as follows: 1) The majority of the handicapped children were wearing ready·made-garments and their mothers considered the fabric elasticity first. 2) The slacks wear test indicated that the slacks ease of 8 cm should be added above the natural waist line in the back for the wheelchair bound children. 3) In a sitting posture on the wheelchair, $3\~4$ cm should be cut below the natural waist line in the front but in a standing posture, $1\~2$ cm should be cut below the natural waist line in the front. 4) The double jersey (cotton/polyester) slacks was highly estimated of ease ana length of slacks in a sitting posture. The stretchable jean (cotton/spandex) slacks was estimated high of appearance but muslin slacks (cotton) was less estimated of ease and appearance of slacks.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.76-79
• /
• 2008

A new rose cultivar, 'Pure Heart' was selected from the progenies of a cross between 'Saphir' and 'Crystal Line' at the Gyeonggi-Do Agricultural Research and Extension Services in 1998. It was finally selected in 2002 after evaluation trials for three years (2000-2002). 'Pure Heart' was developed for a standard-type cut flower. 'Pure Heart' has some good agricultural and marketing traits. 'Pure Heart' has good qualified flower of which color is fair bright pink, 6.8cm in flower diameter and 4.5cm in flower height. 'Pure Heart' produce $122stems/m^2$ in a year, and has 45 petals per flower. The length of cut flower was long with 66.0cm. Vase life of the cultivar could be as long as 8 days. Futhermore marketing-quality was good in some aspects. The cultivar was applied for a variety protection in 2004 and was released to commercial growers in 2005.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.2
• /
• pp.161-170
• /
• 2017

In this study, the characteristics of a horizontal sundial from the Joseon Dynasty were investigated. Korea's Treasure No. 840 (T840) is a Western-style horizontal sundial where hour-lines and solar-term-lines are engraved. The inscription of this sundial indicates that the latitude (altitude of the north celestial pole) is $37^{\circ}$ 39', but the gnomon is lost. In the present study, the latitude of the sundial and the length of the gnomon were estimated based only on the hour-lines and solar-term-lines of the horizontal sundial. When statistically calculated from the convergent point obtained by extending the hour-lines, the latitude of this sundial was $37^{\circ}$ $15^{\prime}{\pm}26^{\prime}$, which showed a 24' difference from the record of the inscription. When it was also assumed that a convergent point is changeable, the estimation of the sundial's latitude was found to be sensitive to the variation of this point. This study found that T840 used a vertical gnomon, that is, perpendicular to the horizontal plane, rather than an inclined triangular gnomon, and a horn-shaped mark like a vertical gnomon is cut on its surface. The length of the gnomon engraved on the artifact was 43.1 mm, and in the present study was statistically calculated as $43.7{\pm}0.7mm$. In addition, the position of the gnomon according to the original inscription and our calculation showed an error of 0.3 mm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.808-812
• /
• 2003

We need a lot of manpower and we can cut down a labor cost by applying industrial robots the footwear bonding automation process. In this study, we suggest how to program off-line robot path along a shoe's outsole shape in the footwear bonding process by 5-axis microscribe system like robot arms. This microscribe system development consists 5-axis microscribe mechanics, signal processing circuit, and PC with software. It is the system for making database of a shoe's outsole through the movement of a microscribe with many joints. To do this, first read 5-encoders' pulse values while a robot arm points a shoe's outsole shape from the initial status. Then, calculate a relative shoe's outsole by Denavit-Hatenberg's (D-H) direct Kinematics of known length of links and coordinate values. Next, calculate the encoders' pulse values of the robot arm's rotation and transmitting the angle pulse values to the PC through a circuit. Finally, it is able to display a shoe's outsole at real-time by computing the Denvavit-Hantenberg's (D-H) direct kinematics in the PC. With the coordinate values calculated above, we can draw a bonding gauge-line on the upper. Also, we can make off-line robot path programming compute a shoe's bonding area on the upper. These results will be effectively applied for programming a robot path on off-line and automatically.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.328-331
• /
• 2009

The white flowered 'Eorayeon 2ho' is a cultivar of Lilium ${\times}$ formolonga developed in Department of Horticultural Sciences, Kangwon National University, Chuncheon, Korea. $F_1$ hybrid LA-77 was selected from the cross between a selected selting line($S_3$) of L. longiflorum 'Lorina' and a selfing line($S_3$) of L. ${\times}$ formolonga 'Augusta' in 2000. The $F_1$ hybrid LA-77 was backcrossed by a selected line of L. ${\times}$ far molonga 'Raizan No. 1' from 2001 to 2002. 'MF-No.2' was preliminarily selected for its upward flowering habit and high plant height. The evaluation of characteristics was investigated from 2003 to 2004 in Chuncheon and Yungweol, Kangwon province. 'Eorayeon 2ho' blooms in early July at outside, with high resistance to Botrytis and showing upward flowering habit. The plant height is 132.6 cm and the percentage of seed germination is 95.3%. Mean tepal length and width are 16.0 em and 4.3 cm, respectively. The length and width of leaf is 12.3 and 3.2 cm, respectively. This seed propagating cultivar shows high plant height suitable for a cut flower.