• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1666-1673
• /
• 1997

In order to investigate the characteristics of sound-structure interaction plate having a cut-out, we modeled a rectangular cavity and the flexible plate of the cavity. Because the particle velocity of air is the same as that of plate on the plate, we could easily redefine vibration equation using the velocity potential. We calculated the natural frequencies of plate using orthogonal polynomial functions which satisfy the boundary conditions in the Rayleigh-Ritz method. For the change of vibration characteristics, the effect of sound-structure interaction is more dominant than that of cut-out size.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.205-215
• /
• 2011

Films are sensitive to ultraviolet rays and in contrast, digital camera sensors are extremely sensitive to infrared rays due to the differences in spectral characteristics. As a result, all digital cameras that use CCD or CMOS are equipped with IR Cut-Off Filter on the overall sensor. Complete block out of infrared rays is ideal, but the actual experiment results showed that infrared rays were not being blocked out completely. Infrared permeability was also different for each camera. Therefore, this study aims to analyze the effect of the minute quantities of infrared rays, which get transmitted due to mechanical properties of IR Cut-Off Filters that are installed on digital cameras, on digital picture images. The results obtained by carrying out a comparative analysis of a UV Filter (infrared transmitting state) and a UV-IR Filter (infrared blocked out state) are as follows. It was confirmed that the minute quantities of infrared rays do affect dynamic range and resolution to some extent, despite the little or no difference in noise and color reproduction.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.10a
• /
• pp.170-171
• /
• 2004

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.34-38
• /
• 2003

This study was carried out to investigate the changes of dehydration process and quality of cured leaves with crushed midribs and cut of the yellowed leaves during drying stage of flue-cured tobacco. The crushed midribs of yellowed leaf dried out before raising the highest temperature of midrib drying stage and reduced the curing time by about 20 hours. However, the cut of yellowed leaf was not affected the curing time and dehydration process during drying stage of flue-curing due to a problem with the cut leaves packing excessively in the curing container. The cured weight yield was increased with crushed midrib and cut leaves, and nicotine and sugar contents of cured leaves and quality in terms of dollars per kilogram were decreased with crushed midrib and cut leaves.

• Advances in nano research
• /
• v.7 no.6
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• Journal of Fashion Business
• /
• v.16 no.6
• /
• pp.63-79
• /
• 2012

Modern art is getting more comprehensive and diversified regardless of genre in many forms due to the pluralism and anti-aesthetic trend of the time which is impacted by post modernism. This atmosphere is also applied to fashion illustration which creates synergy effect in cooperation with many different genres. This study selected Matisse' paper cut-out as the subject which would reflect the minimalism and ionism of modern plasticity. By taking this as the motive for fashion illustration, I made seven illustration works with the subject of minimalism of form and color. The conclusion of this study is as following. First, Matisse's paper cut out has controlled plasticity related to the modern ionism and it well fits the modern trend and sensibility which is appropriate for motive of fashion illustration. Second, by upgrading the technique of Matisse' paper cut-out in a modern way such as combination of hand drawing and computer graphic using Photoshop, I was able to make originative and creative illustration works with background and patterns that were closely connected with each other. Third, applying the fashion illustration to other various products is being well received now and I made my illustrations that could lead to follow up studies to apply the fashion illustration to other different products. Matisse' paper cut-our has forms, colors and patterns that can contain both commercial and artistic value. Therefore it is quite feasible for follow up research to apply into many different areas.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.253-260
• /
• 2010

The primary focus of this study was to explore the variation in dose distributions of electron beams between different types of construction structure of cut-out blocks embodied in electron cones, given that the structure is considered one of the causes of multiple scattered radiation from electrons which may affect dose distributions. For evaluation, two types of cut-out blocks, divergency and straight, manufactured for this study, were compared in terms of area of interval in distribution of dose, and flatness and symmetric state of surface being radiated. The results showed that divergency cut-out blocks reduced the lateral scattering effects on the thickness of cut-out blocks more substantially than straight ones, leading to more uniform dose distribution at baseline depth. Notably in divergency cut-out blocks, the high dose area decreased more significantly, and more uniform dose distribution was observed at the edge of the irradiated field. This points to a need to consider the characteristics of dose distribution of electron beams when setting up radiotherapy planing at the venues. Therefore, this study is significant as an exploratory work for ensuring high accuracy in dose delivery for patients.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.1-8
• /
• 2013

It is generally required to use modeling or animation tools for inserting dynamic objects into augmented reality, and this process demands high expertise and complexity. This paper proposes a video object based authoring method that enables augmentation with dynamic video objects without such process. Integrated grab-cut and grow-cut method strips initial area of video target off the existing video clips, and snap-cut method is then applied to track objects' boundaries over frames so as to augment real world with continuous motion frames. Experiment shows video cut-out and authoring results achieved by only a few menu selections and simple correcting sketch.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.26-35
• /
• 2001

We are, now in the 21st century, that environmental preservation and the campaign for bio-diversity protection are very important issues the government must deal with as nation's main policy. To make road and building construction, housing land service, construction of golf fields, and various development works, we have made artificial topographical alterations and as a result, the cut-slop has been increased. However, without the proper study and clear planning, revegetation for the stability of the cut-slop has worked out. These efforts now are causing derangement of an ecosystem and spoiling the nature without considering for ecological adaptation. Therefore, we are going to find out the Revegetation Method to Cut-Slopes considering both the ecological adaptation and harmony with the nature.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.45-54
• /
• 2013

In this paper, a theoretical weight-reduction method was suggested to substitute an underframe material of a box-type bodyshell having cut-outs with an alternative light-weight material. To utilize the material substitution method previously developed for a box-type hybrid bodyshell not having cut-outs, we derived a box-type baseline model without cut-outs which is similar to the stiffness condition of a box-type bodyshell having cut-outs. To do this, the thicknesses of roof and walls of the baseline model were determined such that the deflection of the baseline model under a distributed vertical load condition is equal to the sum of the theoretical section deflections of the original box model with cut-outs. Next, to derive a hybrid bodyshell by under-frame material substitution, the material substitution method for a box-type hybrid bodyshell without cut-outs was applied to the box-type baseline model. Finally, we compared the FE simulation results of the derived hybrid bodyshells having cut-outs for various materials with the theoretical results of the suggested method, and we obtained their good correlations.