• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.24-29
• /
• 2015

Residual stresses arising from the materials processing such as welding and joining affect significantly the structural integrity depending on the external loading condition. The quantitative measurement of the residual stresses is of great importance in order to characterize the effects of the residual stresses on the structural safety. In this paper, we introduce a newly devised destructive technique, the contour method (CM), which is applied for the measurements of the residual stress distributions through the thickness of a 80 mm thick steel weld. Residual stresses are evaluated from the contour, which is the normal displacement on a cut surface produced by the relaxation of residual stresses, using a finite element model. The CM provides a two-dimensional map of the residual stresses normal to the cut surface. The CM developed in the present study was validated in comparison with the residual stress distribution determined by a well-established neutron-diffraction residual stress instrument (RSI) instrumented in HANARO neutron research reactor.

• KIEE International Transactions on Power Engineering
• /
• 제2A권3호
• /
• pp.121-128
• /
• 2002

This study proposes a new method for transmission system expansion planning using fuzzy integer programming. It presents stepwise cost characteristics analysis which is a practical condition of an actual system. A branch and bound method which includes the network flow method and the maximum flow - minimum cut set theorem has been used in order to carry out the stepwise cost characteristics analysis. Uncertainties of the permissibility of the construction cost and the lenient reserve rate and load forecasting of expansion planning have been included and also processed using the fuzzy set theory in this study. In order to carry out the latter analysis, the solving procedure is illustrated in detail by the branch and bound method which includes the network flow method and maximum flow-minimum cut set theorem. Finally, case studies on the 21- bus test system show that the algorithm proposed is efficiently applicable to the practical expansion planning of transmission systems in the future.

• 한국조경학회지
• /
• 제18권3호통권39호
• /
• pp.39-56
• /
• 1990

The purpose of this study is to analyze the roadside slope of mountainous Parkway. 48 sites were selected by Random Ranking Sampling. This study was researched on the slope condition with the cause of occurrence, the situation of fundamental engineering works and vegetation on slopes. The main results of this research are summarized as follow ; 1. Slope shapes are shown nine types in cut slope and four types in fill slope. 2. Generally, fill slopes are larger than cut slopes in slop area. 3. Grade is more steep than standard grade. 4. Main engineering works, which constructed for slope stability, are terracing, side-ditch wall, channel, concrete trellis works and wire fence. 5. Roundabout channel were many constructed within the sector of Ukmojeong-Deokdong, but were few constructed within the sector of Banseon-Seongsam pass and Cheoneun Temple-Seongsam pass. 6. Most. of side-ditch wall were constructed of concrete and wet-masonry. 7. In vegetation works, many exterior species were selected. 8. Planting pattern was not combinated with the national park landscape.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.81-88
• /
• 2022

Titanium alloy (Ti-6Al-4V) has excellent mechanical properties and high specific strength; therefore, it is widely used in aerospace, automobile, defense, engine parts, and bio fields. Particularly in the aerospace field, as it has a low specific gravity and rigidity, it is used for the purpose of increasing energy efficiency through weight reduction of parts, and most have a thin-walled structure. However, it is extremely difficult to machine thin-walled shapes owing to vibration and deformation. In the case of thin-walled structures, the cutting forces and vibrations rapidly increase depending on the cutting conditions, significantly affecting the surface integrity and tool life. In this study, machining experiments on thin-wall milling of a titanium alloy (Ti-6Al-4V) were conducted for each experimental condition with different axial depths of cut, radial depth of cut, and machining sequence. The machining characteristics were analyzed, and an effective machining method was derived by a comprehensive analysis of the machined surface conditions and cutting signals.

• 산업공학
• /
• 제9권1호
• /
• pp.13-24
• /
• 1996

Quality of injection molded parts is dependent on both mold design and processing conditions. From the mold design point of view, an optimal shrinkage should be used to compensate the shrinkage of molded parts. From the processing point of view, it is important to analyze the priority of processing conditions because a number processing conditions affect the quality of molded parts. Processing analysis employing the design of experiment was performed, and the shrinkage of molded part was considered as a characteristic parameter to improve the quality. As the result of the analysis of variance on SN ratio of a characteristic value, injection speed and bolding pressure were selected as two effective process parameters. Regression analysis on shrinkage and processing conditions was carried out, and an optimal processing condition was obtained by the response surface analysis. Shrinkage at the optimal condition could be used to reduce the number of try-cut at the step of mold making. The ranges of indirect control parameter, such as maximum cavity pressure or weight, measured at the optimal processing condition were used for monitoring the quality of molded parts in process.

• Current Research on Agriculture and Life Sciences
• /
• 제31권1호
• /
• pp.56-60
• /
• 2013

본 연구에서는 소비자의 새로운 색상에 대한 다양한 욕구를 충족시키기 위하여 백색 장미 데니스(R. hybrida 'Denice')를 사용하여 무지개 색상의 장미를 만들고자 하였다. 온도가 높을수록 염색 시간은 빨랐으나 높은 온도에서는 절화의 개화가 빠르게 진행되었으며, 4시간 이상에서는 꽃잎의 끝이 너무 진하게 염색되거나 건조되는 현상이 나타났다. $7.5g{\cdot}L^{-1}$보다 $11g{\cdot}L^{-1}$ 이상의 염료농도에서 염색되는 속도가 빨랐으나 큰 차이는 없었다. 개화정도는 완전봉오리에서 시각적으로는 빨리 염색이 되는 것으로 보였으나 속 꽃잎까지 흡수되는 시간은 3처리 모두 유사하였다. 그러나 상품가치 면에서는 바깥꽃잎이 3~4장 정도 개화했을 때가 가장 적합하다고 판단되었다. 단색 실험의 결과에서 가장 적합한 조건 즉, $20^{\circ}C$염료 용액에 3시간 침지, 화경장 30cm, $11g{\cdot}L^{-1}$의 염료 농도, 바깥 꽃잎이 3~4장 개화한 'Denice' 장미에 Hot Pink, True Blue, Yellow 3가지 색상을 조합하여 염료를 물올림 한 결과, 6가지 색상을 지닌 무지개색의 장미를 착색, 발현시킬 수 있었다.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 문화기술의 융합
• /
• 제8권6호
• /
• pp.765-773
• /
• 2022

본 연구는 시공성 향상을 위한 수평 굴착 기계 시스템이 적용된 비개착 공법(H.A.S. 공법)에 관한 연구로서 현장 계측과 설계 시 해석한 구조계산과 지반과 일체화된 수치해석을 비교하여 비개착 가설시설물의 구조적 안정성을 평가하였다. 또한 측정결과에 대한 가우시안 확률밀도함수를 적용한 분석결과와 수치해석 결과를 비교·분석하여 계측결과에 대한 적정성을 분석하였다. 본 연구에서는 비개착 시설물 시공 시 사용되는 강관 연결고리에 대한 구조적 안전성 및 장기 내구성을 수치해석을 바탕으로 분석하였다. 분석결과, 강관 및 강관 연결고리는 충분한 구조적 안전성 및 장기내구성을 확보할 수 있는 것으로 분석되었다. 따라서 본 연구에서 제시한 비개착 공법(H.A.S. 공법)은 지반조건의 불명확성을 감안하더라도 설계 시 고려한 수치해석결과보다 실제 현장에서의 거동이 보다 안전측으로 나타나 구조적 안전성 및 시공성 확보가 가능한 것으로 분석되었다.

• 생물환경조절학회지
• /
• 제22권2호
• /
• pp.175-181
• /
• 2013

최근 신선 유통되는 퉁퉁마디는 식물 체내 수분 함량이 높고 조직이 단단하지 못해 저장성이 낮은 식물로 MA 저장을 통해 저장성을 향상시키고, 최근 새롭게 개발된 비천공 breathable(NPB) 필름을 적용하여 각기 $5^{\circ}C$와 $10^{\circ}C$로 저장하여 실제 유통 수준에서의 영향을 알아 보았다. 또한 신선 편이 제품으로의 유통 가능성을 알아보기 위하여 3cm, 5cm, 그리고 10cm로 각각 절단하여 저장성을 상호 비교하였다. 그 결과 $10^{\circ}C$에 비하여 $5^{\circ}C$ 저장 조건이 NPB 필름을 적용 하였을 경우 저장력이 우수한 결과를 보였는데 저장중 생체중의 감소율은 $5^{\circ}C$에서 25일 저장 종료일까지 2% 이내의 결과를 보였고 $10^{\circ}C$에서는 저장 15일 후에 100,000cc NPB 필름을 제외하고 2% 이내의 감소율을 나타내었다. $5^{\circ}C$와 동일 기간인 15일을 기준으로 비교하면 $5^{\circ}C$가 1% 이내의 감소율을 나타내 상대적으로 우수한 결과를 보였다. 동일기간 동안 측정한 이산화탄소와 산소 농도의 변화에서는 5,000cc NPB 필름이 MA 저장시의 특징을 보였다. 저장중 포장내 에틸렌 농도는 진공 필름에서 NPB 필름처리들보다 10~100배까지 높았으나, 크기별 차이에 통계적 유의성은 없었다. 각기 $5^{\circ}C$에서 25일간 그리고 $10^{\circ}C$에서 15일간 저장한 이후 항산화 활성을 측정, 상호 비교한 결과 $5^{\circ}C$가 $10^{\circ}C$보다 두배 이상의 항산화 활성도를 나타내었고 100,000cc NPB 필름에서 높은 활성도를 보였고 크기별로는 10cm 크기가 활성도가 낮아지지 않는 것으로 나타났다. 저장 종료후 관능검사를 통한 외관품질과 이취를 평가한 결과 $5^{\circ}C$ 처리와 5,000cc 필름을 적용한 구에서 상대적으로 높은 수준으로 나타났다. 본 실험을 통하여 $5^{\circ}C$, 저장시 5,000cc NPB 필름을 MA 저장에 적용하는 것이 타당하다는 결과를 얻을 수 있었다. 다만 실제 유통 현장에서 사용되는 온도조건이 $10^{\circ}C$임을 고려하면 $10^{\circ}C$ 저장 시 10cm 크기에는 100,000cc NPB 필름이 단기유통이라는 측면에서 적용이 가능할 것 으로 판단되었다.

• 한국발생생물학회지:발생과생식
• /
• 제19권2호
• /
• pp.97-109
• /
• 2015

We assessed the effects of various dietary conditions on the growth, phenotypic traits, and morphometric dimensions of rock bream, Oplegnathus fasciatus and on the morphometric dimensions of sectioned olive flounder, Paralichthys olivaceus. Rock bream in the fed group increased in body weight, standard length, and condition factor, but these parameters decreased significantly for fish in the starved group (P < 0.05). The head connection dimensions of fish in the fed group decreased, while for starved fish there was increase in external morphometric dimensions (P < 0.05). In both species, sectioned morphometric analysis revealed that fish in the fed group had a larger body circumference and cross-cut sectional area, and greater cross-cut section height, relative to the starved group (P < 0.05).