• Korean Journal of Veterinary Research
• /
• v.29 no.4
• /
• pp.425-431
• /
• 1989

This study was undertaken to investigate the changes of enzyme activities resulted from low concentrated carbon monoxide poisoning on the caudate nucleus in rat. The activities of cytochrome oxidase, succinate dehydrogenase and lactate dehydragenase were observed histochemically, after the experimental animals were poisoned to 100ppm carbon monoxide for 8 hours every day from one day to 16 days. The materials were sliced from coronal section at the level of the optic chiasm and immediately frozen sections of $10{\mu}m$ thickness were cut on the cryostat at $-15^{\circ}C$ and incubated in the medium containing substrate for histochemical detection of cytochrome oxidase, succinate dehydrogenase and lactate dehydrogenase. The sections were mounted in glycerol gelatin and observed under light microscope. It was obtained that cytochrome oxidase activity decreased moderately and succinate dehydrogenase activity showed marked or moderate activity during entire poisoning period and lactate dehydrogenase activity showed marked or moderate activity from one to 8 days but recovered to normal condition at 16th day.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.347-352
• /
• 2002

The Cut off-type progressive die for U-bending production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by Center Carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e. die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the Modeling on the I-DEAS program, components drawing on the Auto-Lisp, CAD/CAM application, ordinary machine tool operating and revision by tryout.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.79-89
• /
• 2014

This study was carried out to provide basic information to improve the surrounding ecosystems with benefit analysis and monitoring in cut slopes following establishment of a test construction to improve ecological environment in slopes of an expressway. Field tests from October 2012 to May 2013 were conducted in Seosejong IC and Shinyang IC. In order to improve the view of slopes, soil condition is an important factor. The earth slope, it is possible to introduce directly the plant. Stable construction method was applied, another foundation for planting is necessary. The mixing ratio of the seeds according to the experimental results, the difference was found at an early stage plants in Site I (Seosejong IC). Trees were planted on terraced structures were well coordinated and pictures. The growth of planted trees was good in Site II (Shinyang IC). Due to the use of plants in the landscape will continue to change. Thus, long-term monitoring and landscape analysis will be needed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.727-730
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed far each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Virtual Engineering of the separator inserting machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.1038-1043
• /
• 1997

To adapt the neural network proess for the purpose of determination of optimal utting onditions (optimal cutting speed and feed rate), some selection strategies for the machining factors are necessary, which is considered planning cutting process. In this case, factors that have both nonlinearity and strong relationship must be selected. Although tool grade and chemical properties of workpiece material have strong effect to cutting speed, it's not easy to find a analytic relation between them. In this paper, a mathematical method for determining the optimal amount of cutting (depth of cut, feed rate) is presented by tool goemetry and heat generation during cutting process. And various tool grade and workpiece material groups ase classified based on its chemical properties. Thier chemical composition and hardness are used as input pattern for neural network learnig. The result of learning shows the relationship between tool grade and workpiece material and it is proved that it can be used as a sub-system for automatic process planning system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.77-83
• /
• 2007

The study on damaged layer is necessary for machinability improvement in micro machining. The damaged layer in metal cutting is derived from plastic deformation and transformation of metal structure. The damaged layer affects micro mold life and micro machine parts. In this study, the damaged layer of micro machined surface of copper is evaluated according to various machining condition. The damaged layer structure and metallurgical characteristics are measured by optical microscope, and evaluated by cutting forces and surface roughness. The scale of this damaged layer depends on cutting process parameters and machining environments. By experimental results, depth of damaged layer was increased with increasing of cutting depth, also the damaged layer is less occurred in down-milling compared to up-milling during micro endmilling operation.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.19-34
• /
• 1997

Classical earth pressure theories normally assume that ground condition remains uniform for considerable distance from the wall, and that the movement of the wall is enough to result in the development of an active pressure distribution. In the case of many low gravity walls in cut, constructed, for example, by using gabions or cribs, this is not commonly the case. In strong ground a steep temporary face will be excavated for reasons of economy, and a thin wedge of backfill will be placed behind the wall following its construetion. A designer then has the difficulty of selecting appropriate soil parameters and a reasonable method of calculating the earth pressure on the w리1. This paper starts by reviewing the existing solutions applicable to such geometry. A new silo and a wedge methods are developed for static and dynamic cases, and the results obtained from these are compared with two experimental results which more correctly mod el the geometry and strength of the wall, the fill, and the soil condition. Conclusions are drawn concerning both the magnitute and distribution of earth pressures to be supported by such walls.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.207-210
• /
• 1982

For the removal of initial water content in cuttlefish, the effects of fixed-bed drying condition on the drying rate were investigated, with following results. 1. The drying rate of cuttlefish dried at fixed-bed condition was also faster than that at natural convection type or hot air dryer.2. By controlling air temperature and its direction to cut-and-peeled sample the drying time can be reduced to 2 hrs. 3. Shirai's equation and Arrhenius' law were applicable to fixed-bed dried cuttlefish. Drying rate constant (k) by Shirai's equation, and Arrhenius' plot were as shown in Table 3, 4 and Fig.3, respectively.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.191-199
• /
• 2001

The oxidation and recrystallization behaviors of Ni-base single crystal superalloy, CMSX-2 were investigated to determine the condition of the preparation for transient liquid phase (TLP) bonding operations. The faying surfaces of CMSX-2 were worked by the shot peening, fine cutting and mechanical polishing treatments and the degree of working of treated surfaces was evaluated by the hardness test and X-ray diffraction method CMSX-2 was heat-treated at 1,173∼1.589k for 3.6ks in vacuum of 4mPa. The mechanically polished surface was slightly oxidized after heat treatment even in the vacuum atmosphere of 4mPa. The thickness of an oxide film increased with increasing the heating temperature and the surface roughness of the faying surface. Recrystallization occurred at the surface after heat treatment at above 1,423K when the hardness was increased more than Hv600 by the shot peening treatment while the mechanically polished or fine cut surfaces didn't recrystallized. Based on these results, it was clearfied that the mechanically polishing with fine abrasive grit could be used for the preparation of faying surface of CMSX-2 before bonding operation.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.1
• /
• pp.17-20
• /
• 2020

Wheat is the most abundant crop in the world, accounting for one third of the world's population diet. In Ukraine, wheat is in fact, in addition to its nutritional value, a national symbol of the state. Therefore, the main thesis on the development of modern plant growing in Ukraine is the reduction of costs and the introduction of innovative technologies. The quality of grain and seed depends on many factors, namely: agro-climatic conditions, sowing condition of the seed material, quality characteristics of the soil, yielding properties of seeds, pre-sowing seed treatment. etc. For this purpose, the photosynthesis and intensity of photosynthesis need to be limited to the width of the leaf and the height of the leaves by a smaller cut of the stem. It is extremely important to ensure that the head and side pagons of wheat are in good condition. All parameters are often secured by the technology of grain preparation before delivery. Prior to this technology, it is possible to introduce processing of the material in the form for the development of the material. This article presents the effectiveness of the use of infrared irradiation for the pre-sowing treatment of winter wheat seeds in Sekobra Research, Germany.