본 연구는 철도 신설노선 구간 중 퇴적암지대 통과구간의 절토 비탈면 안정성 평가를 위해 퇴적암 층리와 충전물질(샌드심)의 경사에 따른 절토 비탈면의 표준경사 안정성 검토를 실시하였다. 안정성 검토는 비탈면 설계 기준에 의해 건기시, 우기시, 지진시로 실시하였다. 그 결과 퇴적암 지층의 경사가 10도 이하일 경우 절토 비탈면 경사에 따른 안전율에 미치는 영향이 미미한 것으로 검토되었다. 또한 10도 초과 20도 미만의 경사에서는 1:1.0 이상, 20도 이상에서는 1:1.2 이상으로 경사완화를 실시하여야 하는 것으로 분석되었다. 본 연구는 추후 철도 및 도로건설이 퇴적암지역에서 이루어질 경우 비탈면 안정성 평가를 위한 중요한 참고자료로 활용될 수 있을 것으로 기대한다.
본 연구는 신선편이 양파의 포장방법 및 저장온도가 신선편이 양파의 선도유지 및 품질에 미치는 영향을 알아보기 위해 저온 저장 중인 양파를 뿌리 및 줄기 부분을 절단하고 껍질을 제거하는 등 최소로 가공한 양파를 준비하였다. 최소가공 한 신선편이 양파는 polyethylene(PE, $50{\mu}m$) 필름에 밀봉 포장하거나 polyethylene/polypropylene(PE/PP, $100{\mu}m$) 필름에 진공 포장하고, $4^{\circ}C$ 및 $10^{\circ}C$에 저장하면서 21일 동안 미생물 분석, 색도, 산도, pH, 포장 내 기체변화, 관능적 품질을 조사하였다. 미생물 분석 결과 총 세균 및 대장균군의 밀도는 포장방법보다는 신선편이 양파의 저장온도에 큰 영향을 받았으며, $10^{\circ}C$보다는 $4^{\circ}C$에 저장했을 때 세균의 밀도가 낮았다. 곰팡이는 PE 필름에 밀봉 포장하여 $10^{\circ}C$에 저장했을 때 저장 13일부터 다른 처리구에 비해 현저히 높은 밀도를 보였다. 그러나 대장균은 모든 처리구에서 조사기간 동안 검출되지 않았다. 신선편이 양파의 표면 색도값($L^*$, $a^*$, $b^*$)은 포장방법이나 저장온도에 따른 차이는 없었으며, 다만 PE/PP에 진공 포장하여 $10^{\circ}C$에 저장 했을 때 저장 5일부터 17일까지 다른 처리구보다 현저히 높은 색차값(${\Delta}E$)을 나타내었다(p<0.05). 신선편이 양파의 산도는 포장방법 및 저장온도에 따른 영향은 없었으며, pH는 PE/PP 필름에 진공 포장하여 $10^{\circ}C$에 저장했을 때 저장시간이 지나면서 점차 증가하는 경향이었다. PE 필름에 신선편이 양파를 밀봉하고 포장 내 기체조성 변화를 조사한 결과 저장온도 간에 현저한 차이를 나타내었으며, $4^{\circ}C$에서 보다 $10^{\circ}C$에서 높은 $CO_2$ 농도와 낮은 $O_2$ 농도를 나타내었다(p<0.05). 신선편이 양파의 외관 품질은 저장시간이 지나면서 점차 낮게 평가되었으며, 특히 저장 13일 이후부터는 포장방법 및 저장온도에 따라 현저한 차이를 보였다(p<0.05). 신선편이 양파의 관능적 품질은 저장온도에 보다 큰 영향을 받았으며, 동일한 저장 온도에서는 PE 필름에 밀봉한 양파보다는 PE/PP 필름에 진공 포장한 신선편이 양파의 품질이 더 양호하였다. 결과를 종합해보면 신선편이 양파를 PE/PP 필름에 진공 포장하고 $4^{\circ}C$에 저장 유통하는 것이 유통기한 연장 및 품질유지에 가장 효과적인 것으로 판단된다.
This retrospective study aimed to investigate whether there was a difference in the success rate of removal of residual thyroid tissue in patients with the same cutoff serum thyroglobulin (Tg) value-measured 2 weeks after thyroid hormone withdrawal (THW)-for different radioactive iodine (RAI) activities. We identified 132 patients with papillary thyroid cancer who were treated with total thyroidectomy and RAI therapy to evaluate the efficacy of three radioactivities of I-131: 1,110, 3,700, and 5,550 MBq. Serum Tg testing was performed 1 week before RAI treatment and 2 weeks after THW (pre-Tg); the cutoff pre-Tg level was below 10 ng/mL. Stimulated Tg levels were measured on the day of I-131 administration (off-Tg). After 6 months of treatment, we compared the groups for complete ablation, defined as no uptake on a diagnostic I-131 scan, stimulated Tg level of <1.0 ng/mL, and Tg antibody level of <100 ng/mL. Ninety-five patients (72.0%) achieved complete ablation, with 57.1% (8/14), 78.2% (68/87), and 61.3% (19/31) in the 1,110 MBq, 3,700 MBq, and 5,550 MBq groups, respectively. There was no significant difference in the complete ablation rates between the three groups. In the multivariate analysis, the off-Tg level was a significant predictor of complete ablation. RAI therapy with low radioactivity (1,110 MBq) seemed sufficient for ablation in patients with papillary thyroid cancer with a pre-Tg level below 10 ng/mL. The off-Tg level is a promising and useful predictor of complete ablation after initial RAI therapy.
JSTS:Journal of Semiconductor Technology and Science
/
제8권3호
/
pp.251-263
/
2008
In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.
The antioxidative and protective activities of kefir, low-fat dry milk (NFDM) extract and fractions on SFME cells in serum-free medium were investigated. Kefir and low-fat kefir and NFDM extract were made by solubilizing the freeze dried powder forms in deionized water, filtering through glass prefilter, 12 ㎛ and 2 ㎛ membrane, and demineraling with chelating resin. Kefir, low-fat kefir and NFDM extract were fractioned into dialyzate and retentate by dialysis with membrane tube having the molecular cut-off of 3,500 Dalton. An antioxidative activity was analyzed by the in vitro model system using a linoleic acid. In the case of kefir an antioxidative activity was detected only in the retentate of kefir extract. On the other hand NFDM showed an antioxidative activity in extract, demineralized extract, dialyzate and retentate. The retentate of kefir extract had the higher antioxidative activity than that of NFDM extract. Kefir showed the protective effect of SFME cells in serum-free medium in extract, demineralized extract and retentate, but low-fat kefir didn't. NFDM had the similar protective effect on SFME cells as extract, demineralized extract and retentate of kefir.
$Na_2CO_3$와 [M($SO_4$)(M = Ni, Co, Mn)]을 사용함으로써, Carbonate 공침 합성법에 의해 $[Ni_{0.6}Co_{0.2}Mn_{0.2}]CO_3$ 전구체를 합성하였다. 합성된 전구체는 공기분위기에서 $Li_2CO_3$와 혼합하여 각각, 750, 850 그리고 $950^{\circ}C$에서 소성되었고, 이로 인한 $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ 양극활 물질의 소성온도가 미치는 영향을 조사하였다. $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$의 구조와 특성은 X-선 회절 분석(XRD), 시차주사현미경(SEM) 그리고 전기화학적 측정으로 분석되었는데, X-선 회절 결과 $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$는 소성온도가 증가함에 따라서 $I_{(003)}/I_{(104)}$는 증가하고 R-factor 는 감소하였으며, 시차주사현미경 결과에서는 1차 입자의 크기가 증가하는 경향을 보였다. 특히, $950^{\circ}C$에서 24시간 동안 소성된 $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$는 가역 용량이 $165.3mAhg^{-1}$[cut-off voltage 2.5~4.3 V, 0.1 C($17mAhg^{-1}$)] 그리고 50번째 충 방전 사이클 [cut-off voltage 2.5~4.3 V, 1 C($170mAhg^{-1}$)]까지 95.4%의 우수한 용량 보존율을 가지면서 가장 우수한 전기화학적 특성을 보여주었다.
Hot shear-welding is a process of bonding two plates together by using shearing stress in a controlled manner. This study dealt with the hot shear-welding process of two aluminum plates. These two plates were piles up in the shear-welding mold. Due to the shearing stress, these two plates were cut off longitudinally, and meantime they were welded together. During this process the control of the surplus material flow is very important, and it can be realized by designing the overlapping length and the shape of the cavity. The commercial software Deform-3D was employed to predict the effect of these two factors. The overlapping length and the shape of the cavity that presents the optimum design was then developed to get a good shear-welding process.
A new method of realizing the field effect transistor with a sub-.mu. channel width is described. The sub-.mu. channel width is made possible by etching grooves into n$^{+}$ pn$^{[-10]}$ n$^{[-10]}$ structure and using p region at the wall for the channel region of the Metal-Oxide-Semiconductor transistor (MOST), or by diffusing two different types of impurities through the same diffusion mask and using p region at the surface for the channel region of MOST. When the drain voltage is increased at the pn$^{[-10]}$ drainjunction the depletion layer extends into the n$^{[-10]}$ region instead of into p region; this is also the secret of success to realize the sub-.mu. channel width. As the result of the experimental fabrication, a microwave MOST was obtained. The cut-off frequency was calculated to be 15.4 GHz by Linvill's power equation using the measured capacitances and transconductance.
A new curve fitting algorithm based on modal analysis is introduced for extracting the modal parameters from the measured frequency responses. To compensate the effect of cut-off frequency ranges the transfer function including residual mass and residual flexibility is employed. Model parameters are computed from the newly defined form of transfer function in a simple way. The accuracy of this algorithm is proved by applying to the 3 degrees of freedom model and vibration of cantilever beam.
한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
/
pp.386-391
/
1998
The effect of the changes in parameter angles(precone, droop, sweep) on the lead-lag damping was focused on. Experiment was made with hingeless 4-blade rotors and NACA 0012 airfoil. For the measurement of the rotating natural frequencies and lead-lag damping, non-rotating swash plate was oscillated at the regressing lag mode frequency and the data were acquired after the excitation was cut off. Analysis was made using a finite element formulation based on Hamilton's principle. The main blade is assumed as elastic beams. Quasi-steady strip theory is used to obtain aerodynamic forces, and non-circulatory forces are also included.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.