• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.1-8
• /
• 2008

기존 구조물의 RC 보는 전단내력이 부족한 경우가 빈번히 발생하며, RC 보의 전단파괴거동은 갑작스럽고 취성적이다. 자중의 증가를 줄이면서 전단성능을 향상시키는 보강방법으로 강판, 탄소 판 및 탄소섬유시트 등과 같은 보강재료를 사용하여 전단 내력이 부족한 기존 RC 보의 표면에 고성능 접착제로 부착하는 방법이 실무에서 가장 많이 적용되고 있다. 본 연구는 보강재료로 강판을 사용하며, 보강재료의 형태는 Slit의 크기와 모양으로 다양하게 변화시키고 유닛화하였다. 총16개 실험체에 대하여 전단보강근의 유무, Slit의 형상, 강판두께 등을 변수로 한 실험을 통하여 Slit형 강판으로 전단보강한 RC보에 대한 보강효과, 파괴성상 및 전단내력을 비교 분석하였다. 실험결과 파괴모드는 수직형 Slit(SV시리즈)실험체는 전단파괴를 하였고, 경사형 Slit(SD시리즈)실험체는 휨파괴 양상을 나타내었다. SV시리즈 실험체는 사인장 균열발생과 동시에 Slit 강판이 콘크리트 표면을 물고 떨어지는 부착박리 파괴거동으로 콘크리트 조기파괴를 하였다. SD시리즈 실험체들은 Solid 강판을 부착한 실험체보다 다소 큰 강성과 전단내력을 나타냈다. RC 보의 휨거동을 연성적으로 유도하기위한 전단보강방법은 경사형 Slit 강판의 적용이 효율적이었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권3호
• /
• pp.1105-1109
• /
• 2015

Chemoresistance is the most common cause of chemotherapy failure during breast cancer (BCA) treatment. It is generally known that the mechanisms of chemoresistance in tumors involve multiple genes and multiple signaling pathways,; if appropriate drugs are used to regulate the mechanisms at the gene level, it should be possible to effectively reverse chemoresistance in BCA cells. It has been confirmed that chemoresistance in BCA cells could be reversed by ginsenoside Rh2 (G-Rh2). Preliminary studies of our group identified some drugresistance specific miRNA. Accordingly, we proposed that G-Rh2 could mediate drug-resistance specific miRNA and corresponding target genes through the gene regulatory network; this could cut off the drug-resistance process in tumors and enhance treatment effects. G-Rh2 and breast cancer cells were used in our study. Through pharmaceutical interventions, we could explore how G-Rh2 could inhibit chemotherapy resistance in BCA, and analyze its impact on related miRNA and target genes. Finally, we will reveal the anti-resistance molecular mechanisms of G-Rh2 from a different angle in miRNA-mediated chemoresistance signals among cells.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.65-71
• /
• 2007

The purpose of this study was to investigate variability of kinematic factors affecting the record in women's javelin throwing. For this study, 8 female-javelin thrower participated in this experiment. The three digital video cameras (Sony, 120x) were used to record motions. Kwon3D 2.1 was used to process data and they were analyzed with Excell for factors. The sampling rate of a camera was 60Hz and shutter speed of a camera was 1/1000sec. The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 6Hz. The results were as follows: 1. From cross step to landing of delivery, the average velocities of CoM of non-dominant athletes were greater than dominant athletes and those of CoM of non-dominant athletes less than dominant athletes, but at release dominant athletes had a lower average velocity and a variability than non-dominant athletes. 2. From cross step to landing of delivery, the average throwing velocities and variabilities of a javelin of dominant athletes were greater than dominant athletes, but at release, dominant athletes had a higher velocity than dominant athletes and had a equal variability. 3. At every events, a forward or backward angles and variabilities of non-dominant athletes were greater than dominant athletes. 4. From cross step to landing of delivery, dominant athletes' elbow average angles were greater than non-dominant athletes and the variabilities of latter less than non-dominant athletes, but at release dominant athletes' variabilities were smaller than non-dominant athletes. 5. At landing of delivery, dominant athletes' knee average angles and variabilities of a supporting foot were a greater than non-dominant athletes, and at release, dominant athletes' knee average angles was a greater but variabilities less than non-dominant athletes. In conclusion, the dominant threw javelins fast while having stable postures and the range of elbow's angle large.

• Journal of Astronomy and Space Sciences
• /
• 제30권4호
• /
• pp.255-267
• /
• 2013

In this research, the ground contact opportunity for the fictitious low lunar orbiter is analyzed to prepare for a future Korean lunar orbiter mission. The ground contact opportunity is basically derived from geometrical relations between the typical ground stations at the Earth, the relative positions of the Earth and Moon, and finally, the lunar orbiter itself. Both the cut-off angle and the orbiter's Line of Sight (LOS) conditions (weather orbiter is located at near or far side of the Moon seen from the Earth) are considered to determine the ground contact opportunities. Four KOMPSAT Ground Stations (KGSs) are assumed to be Korea's future Near Earth Networks (NENs) to support lunar missions, and world-wide separated Deep Space Networks (DSNs) are also included during the contact availability analysis. As a result, it is concluded that about 138 times of contact will be made between the orbiter and the Daejeon station during 27.3 days of prediction time span. If these contact times are converted into contact duration, the duration is found to be about 8.55 days, about 31.31% of 27.3 days. It is discovered that selected four KGSs cannot provide continuous tracking of the lunar orbiter, meaning that international collaboration is necessary to track Korea's future lunar orbiter effectively. Possible combinations of world-wide separated DSNs are also suggested to compensate for the lack of contact availability with only four KGSs, as with primary and backup station concepts. The provided algorithm can be easily modified to support any type of orbit around the Moon, and therefore, the presented results could aid further progress in the design field of Korea's lunar orbiter missions.

• 한국지반공학회논문집
• /
• 제23권7호
• /
• pp.99-104
• /
• 2007

심층혼합처리공법은 항만기초, 토류벽구조, 차수벽 및 가시설, 그리고 거축기초와 교량기초 등에서 다양하게 사용되어오고 있다. 이 공법은 지반개량을 통한 침하방지와 안정성확보를 위한 지반강도를 확보하기 위해 시멘트와 혼화제를 현장토와 혼합하는데 있어서 가장 효율적이고 경제적이어야 한다. 본 연구에서는 교반날개의 각도, 교반속도 등에서 다양한 교반조건을 적용하여 실내실험을 수행하였다. 실내실험은 현장 타설장비를 1:8 비율로 축소하여 제작하였다. 최적의 교반조건을 도출하기 위하여 다양한 교반조건에 따른 심층혼합처리 개량체의 강도를 분석하였다. 연구결과, 심층혼합처리공법의 교반조건은 개량체의 강도와 형상에 아주 큰 영향을 미치고 있음을 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.43-55
• /
• 2015

In the case of satellite navigation positioning, the shielding of satellite signals is determined by the environment of the region at which a user is located, and the navigation performance is determined accordingly. The accuracy of user position determination varies depending on the dilution of precision (DOP) which is a measuring index for the geometric characteristics of visible satellites; and if the minimum visible satellites are not secured, position determination is impossible. Currently, the GLObal NAvigation Satellite system (GLONASS) of Russia is used to supplement the navigation performance of the Global Positioning System (GPS) in regions where GPS cannot be used. In addition, the European Satellite Navigation System (Galileo) of the European Union, the Chinese Satellite Navigation System (BeiDou) of China, the Quasi-Zenith Satellite System (QZSS) of Japan, and the Indian Regional Navigation Satellite System (IRNSS) of India are aimed to achieve the full operational capability (FOC) operation of the navigation system. Thus, the number of satellites available for navigation would rapidly increase, particularly in the Asian region; and when integrated navigation is performed, the improvement of navigation performance is expected to be much larger than that in other regions. To secure a stable and prompt position solution, GPS-GLONASS integrated navigation is generally performed at present. However, as available satellite navigation systems have been diversified, finding the minimum satellite constellation combination to obtain the best navigation performance has recently become an issue. For this purpose, it is necessary to examine and predict the navigation performance that could be obtained by the addition of the third satellite navigation system in addition to GPS-GLONASS. In this study, the current status of the integrated navigation performance for various satellite constellation combinations was analyzed based on 2014, and the navigation performance in 2020 was predicted based on the FOC plan of the satellite navigation system for each country. For this prediction, the orbital elements and nominal almanac data of satellite navigation systems that can be observed in the Korean Peninsula were organized, and the minimum elevation angle expecting signal shielding was established based on Matlab and the performance was predicted in terms of DOP. In the case of integrated navigation, a time offset determination algorithm needs to be considered in order to estimate the clock error between navigation systems, and it was analyzed using two kinds of methods: a satellite navigation message based estimation method and a receiver based method where a user directly performs estimation. This simulation is expected to be used as an index for the establishment of the minimum satellite constellation for obtaining the best navigation performance.

• Journal of Korean Neurosurgical Society
• /
• 제65권1호
• /
• pp.96-106
• /
• 2022

Objective : The most common complication of anterior cervical discectomy and fusion (ACDF) is cage subsidence and maintenance of disc height affects postoperative clinical outcomes. We considered cage subsidence as an inappropriate indicator for evaluating preservation of disc height. Thus, this study aimed to consider patients with complications such as reduced total disc height compared to that before surgery and evaluate the relevance of several factors before ACDF. Methods : We retrospectively reviewed the medical records of 40 patients who underwent stand-alone single-level ACDF using a polyetheretherketone (PEEK) cage at our institution between January 2012 and December 2018. Our study population comprised 19 male and 21 female patients aged 24-70 years. The minimum follow-up period was 1 year. Twenty-seven patients had preoperative bone mineral density (BMD) data on dual-energy X-ray absorptiometry. Clinical parameters included sex, age, body mass index, smoking history, and prior medical history. Radiologic parameters included the C2-7 cobb angle, segmental angle, sagittal vertical axis, disc height, and total intervertebral height (TIH) at the preoperative and postoperative periods. Cage decrement was defined as the reduction in TIH at the 6-month follow-up compared to preoperative TIH. To evaluate the bone quality, Hounsfield unit (HU) value was calculated in the axial and sagittal images of conventional computed tomography. Results : Lumbar BMD values and cervical HU values were significantly correlated (r=0.733, p<0.001). We divided the patients into two groups based on cage decrement, and 47.5% of the total patients were regarded as cage decrement. There were statistically significant differences in the parameters of measuring the HU value of the vertebra and intraoperative distraction between the two groups. Using these identified factors, we performed a receiver operating characteristic (ROC) curve analysis. Based on the ROC curve, the cut-off point was 530 at the HU value of the upper cortical and cancellous vertebrae (p=0.014; area under the curve [AUC], 0.727; sensitivity, 94.7%; specificity, 42.9%) and 22.41 at intraoperative distraction (p=0.017; AUC, 0.722; sensitivity, 85.7%; specificity, 57.9%). Using this value, we converted these parameters into a bifurcated variable and assessed the multinomial regression analysis to evaluate the risk factors for cage decrement in ACDF. Intraoperative distraction and HU value of the upper vertebral body were independent factors of postoperative subsidence. Conclusion : Insufficient intraoperative distraction and low HU value showed a strong relationship with postoperative intervertebral height reduction following single stand-alone PEEK cage ACDF.

• 대한핵의학회지
• /
• 제26권1호
• /
• pp.40-48
• /
• 1992

Gated blood pool scan is frequently used for evaluating the change in cardiac function in various cardiac diseases. But resting gated blood pool scan using only LVEF as a cardiac index has been consitently shown to have a low sensitivity, which is about 50%, in detecting coronary artery disease. So it is recommended to compare exercise gated blood pool scan to resting gated blood pool scan. Exercise tests, however, are not always possible, especially in patients with musculoskeletal diseases, recent myocardial infarction and in elderly persons. We studied the usefulness of resting gated blood pool scan using multiple indices in evaluating the patients with coronary artery disease. Studied cases were 185 patients with coronary artery disease (angina pectoris 31, myocardial infarction 154) and 25 normals with low likelihood of coronary artery disease. We used $^{99m}Tc-labeled$ RBC, 740 MBq labeled by in vivo method. The data were evaluated by Micro DELTA computer program. The results were as following: 1) The ejection rates (PER, AER) and filling rates (PFR, AFR) were different in normls and patients with angina pectoris or myocardial infarction. 2) Mean phase angle, ejection rates and filling rates could separate normals from coronary artery disease patients with normal LVEF. 3) Regional ejection fraction was decreased at the site of the infarct in patients with myocardial infarction. 4) Peak filling rate was the the most detectable index in evaluation of cardiac function in patients with coronary artery disease. 5) The threshold at 1.5 standard deviation of normal range was considered as the most reliable cut-off value from ROC analysis. These data suggest that the resting gated blood pool scan has an important role in the evaluation of cardiac functional changes using various cardiac indices in patients with coronary artery disease.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.394-399
• /
• 2017

본 국내 교류전철변전소에서는 주변압기 2차측의 위상각이 $90^{\circ}$인 단상 전원을 얻도록 한 스코트 결선 변압기를 설치 운용 하고 있다. 변압기 보호계전기는 내부에서 고장이 발생하는 경우 변압기 전단에서 전력을 차단시키고 변압기 외부 계통의 사고나 일반차량 운행의 경우에는 동작하지 않아야 한다. 정확한 고장의 판단으로 오동작을 줄이는 것이 전력계통을 안정적으로 유지하고 신뢰성을 향상시키는 측면에서 매우 중요하다. 주 변압기 내부 고장 검출장치로는 브흐홀쯔계전기와 비율차동계전기를 설치하여 변압기를 보호하고 있지만 비율차동계전기의 오동작으로 인해 보호기능을 비활성화 시켜놓은 상태로 운용하는 사례가 있다. 본 논문에서는 스코트 변압기의 특성과 비율차동계전기의 특성을 제시하고 보호계전기의 오동작 사례를 분석하였다. 이를 위해 전력계통 해석프로그램을 이용하여 스코트 변압기에 사용되는 비율차동계전기를 모델링하고 A변전소의 Comtrade 파일로 저장된 고장파형을 입력데이터로 사용하여 동작여부를 판단하여 고조파 분석을 수행하였다. 또한, 고장파형 분석을 통해 오동작 사례에 대한 개선 방안을 도출하고자 한다.

• 보존과학회지
• /
• 제31권2호
• /
• pp.87-94
• /
• 2015

플라스틱 작품은 다양한 환경조건에 따라 갈라짐, 색변화, 백화현상 등 재질손상이 급속하게 발생될 수 있다. 특히 현대예술작품 중 대형 플라스틱 작품의 경우 옥외에 전시되는 경우가 많으며, 이에 강한 햇빛과 높은 습도, 강우 등 물리적, 화학적 손상 요인에 지속적으로 노출되어 있다. 따라서 본 연구에서는 polypropylene(PP), polystyrene(PS), polyetylene(PE), polyvinyl chloride(PVC), polyurethane(PU)의 5가지 범용 플라스틱 표준 재료를 고온, 자외선, 그리고 고온 및 자외선 복합 조건에 노출시킴으로써 환경조건에 따른 플라스틱 종류별 열화 양상을 평가하였다. 그 결과 인공열화에 따른 PP, PS, PE에서 육안 변화가 크게 나타났으며 특히 PP, PS는 가장 큰 색차가 발생하였다. 인장강도와 표면접촉각 측정결과 PP는 큰 변화가 없었고 PS는 가장 많이 감소되는 것을 확인하였다. 광열화에 가장 취약한 재질은 PP와 PS, 내광성이 가장 좋은 재질은 PVC와 PU로 확인되었다. 또한 열화 조건 중 자외선 조건과 고온 및 자외선 복합 조건에서 가장 심한 열화 정도가 확인되었다. 이는 자외선은 직접적 열화 조건으로 작용하였으며 고온의 경우 플라스틱 결합에너지를 끊을 만한 충분한 에너지가 되지 못하기 때문에 순수한 열적에너지로서의 열화 조건보다는 열화 촉매로서 작용한 것으로 판단된다. 이러한 결과는 향후 플라스틱 작품의 재질별 손상원인을 규명하고 보존방안 수립을 위한 기초자료로 활용될 것으로 기대된다.