• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.660-665
• /
• 1993

An elastic model is developed to predict the average thermal residual stresses in the matrix and fiber of a misoriented short fiber composite. The thermal residual stresses are induced by the mismatch in the coefficient of the thermal expansion of the matrix and fiber when the composite is subjected to a uniform temperature change. The model considers two special cases of fiber misorientation ; two-dimensional in-plane and three-dimensional axisymmetric. The analytical formulation of the model is based on Eshelby's equivalent inclusion method and is nuque in that it is able to account for interactions among fibers. The model is more general than past models and it is able to treat prior analyses of the simpler composite systems as extram cases. The present model is to investigate the effects of fiber volume fraction, distribution type, distribution cut-off angle, and aspect ratio on thermal residual stress for both in-plane and axisymmetric fiber misorientation. Fiber volum fraction, aspect ratio, and disturbution cut-off angle are shown to have more significant effects on the magnitude of the thermal residual stress than fiber distrubution type for both in-plane and axisymmetric misorientation.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.954-963
• /
• 2002

For the optimal design of an automotive blower system, effects of the scroll cut-off starting angle, the clearance between blade tip and bellmouth, and the scroll expansion angle on the performance of sirocco fan are investigated experimentally. Best performance is achieved at fan exposure ratio $\Deltae/r_c$,/TEX> =1.0, and clearance ratio $\DeltaeC/C=0.62. Flow characteristics inside sirocco fan are also studied by using LDV. Flow patterns in the inside of fan can be classified into three regions. Velocity vector has the same direction as rotational direction of fan at 0~$120^{\circ}$, toward the fan blades at 150～$180^{\circ}$, and opposite direction at 210~$330^{\circ}$. Turbulent intensity is relatively high near the cut-off edge in the scroll housing.

• 대한족부족관절학회지
• /
• 제19권2호
• /
• pp.51-57
• /
• 2015

Purpose: Minimal incision distal metatarsal osteotomy (MIDMO) is known to be an effective surgical procedure for mild to moderate hallux valgus. However, the result of MIDMO on moderate to severe hallux valgus is controversial; therefore, we investigated the radiological and clinical results of MIDMO on moderate to severe hallux valgus. Materials and Methods: We reviewed 51 feet (48 patients) with moderate to severe hallux valgus. The mean age was 67.0 years and the mean follow-up period was 32.2 months. Radiological data of hallux valgus angle, first intermetatarsal angle, and distal metatarsal articular angle on plain radiographs were analyzed. Recurrence, union, lateral translation of distal fragment and angulation were also analyzed. The clinical data were obtained using American Orthopaedic Foot and Ankle Society (AOFAS) score of preoperation and last follow-up. Receiver operating characteristic (ROC) curve was used to determine a cut-off value. Results: The mean hallux valgus angle measured at preoperation was $37.7^{\circ}$ and $15.9^{\circ}$ at last follow-up. The mean first intermetatarsal angle of preoperation and last follow-up were $15.2^{\circ}$ and $8.3^{\circ}$. The mean distal metatarsal articular angle changed from $12.6^{\circ}$ at preoperation to $7.8^{\circ}$ at last follow-up. Preoperative hallux valgus angle (p=0.0051) and distal metatarsal articular angle (p=0.0078) were statistically significant factors affecting postoperative AOFAS score. Cut-off value of each was $37^{\circ}$ and 13o, respectively. Lateral translation of distal fragment in 5 recurrent cases was 23.0% compared to 45.3% of 46 non-recurrent cases. The result was statistically significant and the cut-off value was 38%. Conclusion: Sufficient lateral translation over 38% in MIDMO on moderate to severe hallux valgus patients with preoperative hallux valgus angle under $37^{\circ}$ and distal metatarsal articular angle under $13^{\circ}$ can lead to good clinical results without recurrence.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.152-155
• /
• 2013

본 논문은 위성방송 수신용 소형 파라볼라 안테나의 높이를 보다 낮추기 위하여 반사면의 상하 부분을 부분적으로 절단하였을 때 나타나는 spill-over 의 증가로 인한 성능지수의 저하를 분석하였다. 또한 안테나를 고도각 0도부터 60도까지 트래킹하는 경우에 측엽과 후엽이 받는 대지면 열잡음의 증가로 인한 잡음온도의 영향을 고려하고, LNA 의 잡음지수로 인한 총 잡음온도의 증가 영향을 고려하여 성능지수 값을 시뮬레이션하여 그 결과를 분석하였다. 분석 결과, 원형 파라볼라의 반사면 상하부분을 35% 절단하였을 때, 잡음온도는 약 15K 정도 증가하였으며, G/T 비는 2.5dB 정도 저하하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.234-237
• /
• 2000

In this paper, a method to implement new Quasi-SOI LDMOSFET is introduced and the electrical characteristics of the device are studied. Key process steps of the device are explained briefly. By performing process and device simulations, electrical characteristics of the device are investigated, with emphasis on the optimization of the tilt angle of p$\^$0/ channel region. The electrical properties of the Quasi-SOI device are compared with those of bulk and SOI devices with the same process parameters. Simulated device characteristics are threshold voltage, off-state leakage current, subthreshold swing, DIBL, output resistance, lattice temperature, I$\_$D/-V$\_$Ds/, and cut-off frequency.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.72-80
• /
• 2004

본 논문에서는 추력중단 후 무유도방식 유도탄의 추력비행단계 유도알고리듬의 설계과정을 다룬다. 유도의 목적은 추력중단 시점에서 요구속도벡터를 성취하기 위한 것이다. 구현 가능한 피치평면 비행궤적을 조사하기 위해 네 가지 성능지수에 대한 비행궤적 최적화를 수행하였다. 궤적최적화 결과로부터 구속조건들을 만족시키기 위해서는 비행초기에 고앙각 기동이 필요함을 알 수 있다. 제안된 유도알고리듬은 개루프 피치자세각 명령 산출기인 피치프로그램과 증가요구속도벡터를 0으로 만들기 위한 요자세각 명령 산출기로 구성된다. 피치프로그램은 궤적최적화 결과 얻어진 피치자세각 선도를 이용하여 구성되었다.

• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.493-506
• /
• 2000

Recently the first author and his coworker report a new finite element method for the Poisson equations with homogeneous Dirichlet boundary conditions on a polygonal domain with one re-entrant angle [7], They use the well-known fact that the solution of such problem has a singular representation, deduced a well-posed new variational problem for a regular part of solution and an extraction formula for the so-called stress intensity factor using tow cut-off functions. They use Fredholm alternative an Garding's inequality to establish the well-posedness of the variational problem and finite element approximation, so there is a maximum bound for mesh h theoretically. although the numerical experiments shows the convergence for every reasonable h with reasonable size y imposing a restriction to the support of the extra cut-off function without using Garding's inequality. We also give error analysis with similar results.

• 비파괴검사학회지
• /
• 제17권2호
• /
• pp.89-99
• /
• 1997

단섬유강화금속복합재료는 최근 항공기, 자동차산업에 있어서 관심의 대상이 되고 있는 재료중의 하나이나 재료의 제조 및 성형중에 재료내의 기지재 및 강화재의 열팽창계수의 차이로 인해 재료 내부에 발생되는 열적잔류응력으로 인한 재료 특성의 변화로 실제적인 재료 적용상에 많은 문제점들이 보고되고 있다. 이와 같은 금속복합재료의 잔류응력의 평가에는 몇가지 비파괴적 방법이 적용되고 있으나 그 측정에 많은 어려움이 보고되고 있다. 따라서 금속복합재료의 보다 실제적인 응용을 위하여는 이와 같은 열적잔류응력을 평가하기 위한 이론적모델의 확립이 요구된다. 본 연구에 있어서는 비방향성을 가진 강화재가 2차원 평면 상태로 기지재내에 존재하는 단섬유강화금속복합재료에 있어서 재료에 균일한 온도 변화가 주어질 때 기지재와 강화재의 열팽창계수의 차로 인해 재료 내부에 발생하는 열적잔류응력을 평가, 예측하기 위한 이론적 탄성 모델을 확립하고자 한다. 본 연구에서 해석하고자 하는 이론 모델은 Eshelby의 등가 개재물 방법을 토대로 하고 있으며 과거 제안되고 있는 이론모델을 포함하는 보다 일반성을 가지는 해석 모델로서, 이 해석 모델을 이용하여 열적잔류응력에 미치는 강화재의 체적률, 종횡비, 분포 상태, 분포 cut-off 각도들에 대한 각 인자의 영향을 검토하였다. 그 결과 강화재의 체적률, 종횡비, cut-off 각도들이 강화재의 분포 상태보다도 금속복합재료의 열적잔류응력에 미치는 영향이 현저함을 알 수 있었다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2370-2378
• /
• 2009

The enhanced phase angle estimation algorithm is essential to supply the power stably under synchronizing with grid source. In this paper, we are proposed the novel phase angle estimation algorithm and verified the validity of proposed method as simulation with PSIM and experiments. We sort the harmonics element using high-pass filter(HPF) that have the cut-off frequency below basic element and make reverse d-q transformation. So, it can be restored the harmonics element at stationary axis, and we can get the fundamental voltage element of AC grid. Proposed PLL method have a rapid responsibility and a large margin at controller design than conventional method because it have a small phase delay and a sufficient controller gain margin. And, it can reduce the error of voltage rms value and axis transformation according to robust PLL algorithm against the harmonic and phase unbalance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.402-406
• /
• 2000

In the Over-The-Range, the outlet size is limited by the industrial standards. Therefor to enlarge the volume of cavity, the installation height of ventilation fan is become small, the system resistance is higher than before. For that reason, the important design variables such as the diameter of a fan, the scroll expansion angle, etc. which play the significant role on flow rate and noise, are confined. In this study, we made an experiment of the diameter of fans relation to scroll expansion angle and investigated flow rate of the length of fans in enlarged cavity volume of OTR, and then we designed the new scroll to improve the flow rate and noise level. As a result, flow rate increased to 110% compared to current scroll and the blade passing frequency of a fan is disappeared by inclined cut-off shapes.