• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1349-1357
• /
• 2010

절토사면의 안정성은 1차적으로 사면 자체의 지반 구조에 의해서 결정되지만 2차적으로 강우와 강설에 의한 수리적인 요소의 영향을 받는다. 매 년 여름 집중호우 기간에 많은 사면들이 붕괴되는 사례를 볼 때, 수리적인 요소가 사면의 안정성에 큰 영향을 주는 것을 알 수 있다. 수리제어공법의 목적은 물이 배수될 수 있는 길을 만들어주는 것으로 그 목적은 매우 간단하다. 하지만 공법이 시공된 이후 강우와 강설로 인해 유입되는 토사, 낙엽이 관리 소홀로 도수로나 배수로를 막아 본래의 역할을 하지 못하는 경우가 대부분이다. 본 연구에서는 이와 같은 문제점으로 발생한 국내 사례를 통해 사면에 적용되는 수리제어공법들의 유지관리 개선방안에 대해 논의하고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.586-591
• /
• 2004

매년 발생되는 절토사면의 붕괴를 사전에 방지하기 위하여 절토사면에 상시 계측시스템을 설치하고 지반의 거동분석을 실시한다. 본 현장의 절토사면 붕괴 규모와 메카니즘을 분석하고 계측 결과와 상호 비교 분석한다. 본 현장은 상시계측시스템 운용 확대 실시에 따른 시험 설치 현장으로 2003년부터 운용 중에 있다. 계측결과에 의하면 강우량과 지반의 거동이 밀접한 관계가 있는 것으로 사료된다. 본 현장의 경우 크게 3번의 지반이동이 있었으며 현재는 안정화 단계에 있는 것으로 사료된다. 그러나, 향후 동절기의 외분 온도 변화와 동반하여 지반의 변동이 우려됨으로 인하여 지속적인 관찰과 자료 분석이 수행되어야 할 것으로 본다.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.50
• /
• pp.84-96
• /
• 2009

Road is typically constructed along ridge area of mountain because of topographical and economic reasons. Therefore, road may face lots of open cut slope which can easily cause rock falling. This study evaluates the structural safety of newly developed falling rock protection system which has a roof deck plate. The structural performance under self-weight, snow load and load from failing rock was investigated using a finite element numerical analysis method. From the analysis results, the H-beam space was limited not to exceed 2.2m. The deck plate was also safe under the examined loading condition. A hinge and connection in the system were investigated through detailed modelling and analysis. The results showed that the hinge was safe enough and that the connection should strengthened with appropriate stiffeners.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1760-1769
• /
• 2007

The cut slope sliding which has been frequently encountered in Pohang area has been reported due to the rapid reduction of shear strength in mudstone after being exposed to the air. Mudstone has characteristics that it has high enough strength and stiffness in a dry condition, but the strength and stiffness decrease in a wet condition with groundwater infiltration. The case study in this paper shows that mudstone which had enough strength in a boring stage has lost the strength after installing PRD steel pipe pile inducing an insufficient bearing capacity, which has been ascertained by the static load test. Test construction has been performed to investigate the most favorable method for increasing a pile bearing capacity in mudstone with various methods such as MSG (Micro Silica Grouting) around the tip and side of a pile, the perimeter grouting combined with Micro pile reinforcement, and concrete filling after tip reinforcing grouting. From the test construction, MSG has been turned out to be the most favorable method for increasing a pile bearing capacity in mudstone, which has been confirmed by the static load test.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.54-61
• /
• 2010

In this research KP-4, one of the plastic mold steels, was coated with the AlTiN from one layer to four layers by the PVD method in the $\Phi$ cemented carbide ball end mill. Coated KP-4 was processed with various conditions. For example, slope of $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ the spindle rotation speed was changed from 10,000rpm to 16,000rpm, the tool feeding speed was changed from 1,300mm/min to 1,700mm/min, the depth of cut was also changed from 0.3mm to 0.9mm, and etc. Cutting component force according to the coating layer number, surface roughness, and the wear of tool were studied.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.47-53
• /
• 2009

Road is typically constructed along ridge area of mountain because of topographical and economic reasons. Therefore, road may face lots of open cut slope which can easily cause rock falling. This study evaluates the structural safety of newly developed falling rock protection system which has a roof deck plate. The structural performance under self-weight, snow load and load from falling rock was investigated using a finite element numerical analysis method. From the analysis results, the H-beam space was limited not to exceed 2.2m. The deck plate was also safe under the examined loading condition. A hinge and connection in the system were investigated through detailed numerical modelling and analysis. The results showed that the hinge was safe enough and that the connection should strengthened with appropriate stiffeners.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.555-560
• /
• 2000

The modeling and the numerical analysis are done so as to develop the Computer Aided Design program for the design of flow control valve attached to the vane pump. The factors affecting the flow rate characteristics, are analyzed by the experiments and the numerical methods. It is shown that the main factor affecting to the first control flow is the diameter of small rod of the spool, the main factor affecting to the second control flow is the diameter of big rod of the spool, the main factors affecting to the cut off are the main spring constant, the initial displacement of main spring and small diameter of the spool, and the dropping slope characteristics of flow rate are decided by the chamfer of spool and the dynamic characteristics of the spool.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.760-767
• /
• 2010

Even though a flexible disk grinding process was often applied to enhance the product quality, it produced non-flat zone in the beginning and the exit (end) area. Since latter area is susceptible to poor product quality with burn mark, careful analysis is required to cope with such degradation. The flexible disk grinding exit stage was analyzed for workpiece length, wheel speed, depth of cut and feed. The exit stage qualities defined as exit stage ratio and exit stage angle or slope was characterized. A neural network application results reveled that exit stage characteristics was predicted more accurately without workpiece dimension with minimum error of 1.3%.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2003

We report a switchable RGB color filters for Lab on a chip. Ink color filter devices are fabricated by PDMS patterning process. The optical transmission in the ultra-violet and visible wavelengths of color filters have been investigated. The ink color filters are characterised by the slope and shape of the spectrum. The transmission of red/yellow filter consists of curves with a sharp cut-off spectrum at 600 and 500 nm. The blue output of the ink filter has 80% peak transmission and weak red-leak, while the green ink filter has 48% peak transmission and red-leak.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.203-206
• /
• 2009

This paper represents an efficient algorithm to segment objects from the background using multiple images of distinct luminous intensities. The proposed algorithm obtains images with different luminous intensities using a camera flash. From the multiple intensities for a pixel, a saturated luminous intensity is estimated together with the slope of intensity rate. Then, we measure the sensitivities of pixels from their slopes. The sensitivities show different patterns according to the distances from the light source. Therefore, the proposed algorithm segments near objects using the sensitivity information by minimizing an energy function. Experimental results on various objects show that the proposed algorithm provides accurate results without any user interaction.