• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.506-525
• /
• 2006

For the design of large scale rock slope which has complex formations and geological structures, generally, insufficiency of geotechnical investigations and laboratory tests are the main factors of slope failures doling construction. In such case, remedial measures to stabilize slope should be selected and applied through reliable investigations and analysis considering the geotechnical characteristics. The rock slope of this study, one of the largest cut slopes in Korea with a length of 520.0 m and maximum height of 122.0 m consists of metasedimentary rocks. And a case study on the causes of large-scale rock slope failure was carried out by analysis of landslides history and site investigations during construction. When the slope with the original design slope of 0.7: 1.0 (H:V) was partially constructed, the slope failure was occurred due to the factors such as poor conditions of rocks (weathered zone, coaly shale and fault shear zone), various discontinuities (joints, foliations and faults), severe rain storm and so on. The types of failures were rockfall, circular failure, wedge failure and the combination of these types. So, the design of slope was changed three times to ensure long-term slope stability. This paper is intended to be a useful reference for analyzing and estimating the stability of rock slopes whose site conditions are similar to those of this study site such as geological structures and geotechnical properties.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.15-27
• /
• 2004

Sliding aspects of rock slope, where large-scaled tension cracks are induced during preliminary excavation, have been analyzed. Structure of rock mass is investigated by performing the electrical resistivity survey and the orientations and positions of discontinuities are measured from DOM-drilled core log. Geological evidence far primary failure movement has been detected and clay minerals which possess swelling properties are identified through XRD analysis. Slope stability is examined by considering the orientations of discontinuities and their trace distributions on the cut-face and neighboring natural slope surface. Both orientations and positions of failure-invoking discontinuity planes, traces of which are exposed within the anticipated sliding region, are concerned fur analyzing the preferred sliding directions. Regional sliding vectors are assessed based on the relative positions of potential sliding planes in the boreholes and the general trend of anticipated failure movement of rock slope is also investigated.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.367-378
• /
• 2002

Recently, the number of tunnels on national roads has been increased due to the trend that construction of the large-scaled cut slopes is limited because of the environmental issues. Therefore, the slope failures of tunnel portal have often occurred. The tunnel portal in use has limitations on selection of the countermeasure and construction against slope failure. In the cases of Suanbo hot springs 1 and 2 tunnel portals, seedding was chosen and constructed as the countermeasureof slope failure when the tunnel was first built but collapsed in April, 2002. In this study, the failure sites were examined accurately through the site investigation and an efficient countermeasure according to stability analysis is presented. It is shown that it is very efficient to use resloping for Suanbo hot springs 1 tunnel and concrete buttress, rock anchor to reinforcement countermeasure, and attached rockfall prevention net by dividing the site into 3 sections for Suanbo hot springs 2 tunnel.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.2
• /
• pp.113-128
• /
• 2004

To investigate major influencing factors on earth pressure acting on an arch-shaped cut and cover tunnel, Monte Carlo simulation based quantitative sensitivity analysis was carried out for mechanical properties of ground as well as excavation configuration-related design factors. From the sensitivity analysis, it was intended that effects of earth pressures from different influencing factors on a cut and cover tunnel should be numerically identified. Output factors used in the sensitivity analysis such as vertical and horizontal earth pressures at different tunnel positions were obtained from the finite element analysis. In this study, it was revealed that depending upon positions where horizontal as well as vertical earth pressures were acting, they were differently influenced by the same input factors. In addition, earth pressures acting an cut and cover tunnel depended mainly on the embankment at crown and the inclination of cut slope.

• Journal of Forest and Environmental Science
• /
• v.16 no.1
• /
• pp.1-16
• /
• 2000

This study was carried out to examine the process of plant succession through vegetation invasion and to select appropriate endemic plant species for rapid stabilization and good visual effect on cut-slopes of forest roads. Establishing total of sixty $1m{\times}1m$ sample plots. fifteen for each forest road constructed in the year of '93 (six-year-old), '95(four-year-old), '97(two-year-old), and '98(one-year-old), the ecological attributes of invading vegetation on cut-slopes were analyzed. The results are summarized as follows: 1. The rate of vegetation coverage was highly associated with soil hardness and aspect of cut-slope. Higher rate of vegetation coverage was caused by larger number of invading plant species. 2. The dominant woody species were Rubus crataegifolius, Rhus chinensis, Lespedeza bicolor, Salix hulteni, Alnus hirsuta, and Pinus densiflora. The visual attractive for the fruit of Rubus crataegifolius and the autumn coloration of Rhus chinensis was noteworthy. The dominant herbaceous species were Youngia sonchifolia, Spodiopogon sibiricus, and Lysimachia clethroides in all study forest roads. Spring flower of Potentilla freyniana and Viola rossii: summer flower of Lysimachia clethroides, Commelina communis, Glycine soja. Persicaria sieboldi, and Oenothera odorata: and autumn flower of Artemisia stolonifera and Impatiens textori were abundant and remarkable. 3. The diversity index of woody species tended to be increased as years passed after construction, and that of herbaceous species were decreased. 4. The dominance of Th of dormancy form was early high in the first year of construction, getting decreased thereafter. And that of MM + M + N was increased as years passed after construction. but that of Ch+H+G+Th+HH was decreased. 5. The degrees of succession were estimated by 359, 111, 97, and 87 for the construction year of '93, '95, '97, and '98. respectively, increased as years passed after construction.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.479-486
• /
• 2006

In this study, 2-D seepage analysis is conducted for the evaluation of Box-Culvert installation, Cut-off Wall Length, permeability reduction of soil under the Box-Culvert effects on Levee Box-Culvert safety. The result of analysis it is obtained that the safety of seepage and slope stability of levee is declined by the installation of Box-Culver. And also obtained that the piping from poor compaction and cavity around Box-Culvert Is Prevented by the Cut-off wall installation below breast wall and levee toe, so it is recommended that the Cut-off Wall below breast wall and levee toe must be installed. And the Cut-off Wall installed below levee center is considered when the safety of piping is declined for the whole levee section. On the other hand, for the realistic analysis it is recommended that the 3-D seepage analysis is more suitable for the safety evaluation of Box-Culvert installed levee when it is considered that the saturated field is dispersed to the ground.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.61-71
• /
• 2016

The purpose of the research is to identify the optimal seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria as leguminous woody plants for the cut-slope revegetation. To investigate the coverage ratio and appearance frequency, we divided Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria into five treatment groups with various quantities of $0.0g/m^2$, $1.0g/m^2$, $2.4g/m^2$, $3.8g/m^2$, and $5.2g/m^2$. For each treatment group, we mixed the identical quantities of herbaceous flowers (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena and Pennisetum alopecuroides) seeds and cool-season turfgrasses (Festuca arundinacea and Poa pratensis) seeds. In this result, as the seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria increased in the spray, the coverage ratio for leguminous woody plants appeared to increase whereas the coverage ratio decreased in herbaceous flowers and cool-season turfgrasses. However, when the seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria exceeded $3.8g/m^2$ in the spray, the coverage ratio of leguminous woody plants rather decreased compared to four treatment groups less than $3.8g/m^2$ seeding ratio. Based on the longitudinal data of coverage ratio in five treatment groups, we observed the gradual process of a short-term succession in which the dominant species shifted in the following order: First, cool-season turfgrasses; Second, herbaceous flowers; Third, leguminous woody plants. Comparing the appearance frequency of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria, Lespedeza cyrtobotrya appeared more frequent in 2014 whereas Indigofera pseudo-tinctoria appeared to be relatively more frequent in 2015. As a result, Indigofera pseudo-tinctoria was discovered to be a dominant species among woody plants. In this study, we observed that the optimal seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria was $2.4g/m^2{\sim}3.8g/m^2$. Moreover, the coverage ratio of 29.1%~35.4% and appearance frequency of 4.6plants~5.8plants were found in the condition of optimal seeding quantity.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.229-240
• /
• 2006

Most of rock slopes contain a lot of discontinuities which have a specific direction and various characteristics. In general, the collapses of the rock slopes occur when the sliding dip of the discontinuity is higher than the internal friction angle and also smaller than the free-air plane of the slope. If a general slope theory is only considered in the case of field exploration of the slopes, there is a possibility that dangerous slopes might be estimated as stable slopes. We mention problems that can easily fail to notice something in field exploration and propose the alternatives to solve the problems through the case studies.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.629-634
• /
• 2000

Rockfall protection fence which is used for mitigation of rockfall hazard, has been constructed without consideration of lithology, height and dip angle of rock slope. However, those factors should be considered for the construction of the protection fence. In addition, the protection fence should be evaluated its performance by in-situ test in order to utilize the fence effectively. This is the first full sized rockfall test in Korea. For this test, the rock cut slope whose height is about 20 m and dip angle is 65 $^{\circ}$ has been chosen. Based on the preliminary simulation procedure, four different concrete balls (0.5 ton, 1.0 ton, 2.0 ton and 5.0 ton) were prepared and four different types of protection fence were constructed. The results of this test will be utilized in the establishment of rockfall protection fence construction manual.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.437-442
• /
• 2001

In Korea, collapse of railway slopes is frequently occurred due to tycoon or heavy rainfall doling rainy season and has been made personal and social damage greatly. In order to evaluate the stability of railway slopes under rainfall, explanatory variables and subordinate variables were selected for multivariate analysis. The sites which failure had occurred due to rainfall were investigated and critical rainfall was defined by the case that had high value of correlation factor after multivariate analyses for 121 cases had been executed. The maximum hourly rainfall during 24 hours before failure caused the collapse of railway embankment and the 0.3 square value of maximum hourly rainfall during 24 hours before failure caused the collapse of railway cut-slope, From the application to collapse examples, it is judged that critical rainfall curve will be used to estimate the stability of slopes.