• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.47-78
• /
• 1999

About 440,000 $\textrm{km}^2$, about twice the size of the Korean Peninsula is covered by loess deposits in China. Along the middle reaches of the Huanghe River, mainly in Shaanxi and in Gansu province loess plateau covers vast area amounting to 273,000 $\textrm{km}^2$ Chinese studies on loess and loessial slopes are summarized. And some of the U. S. study and others are also presented for comparison.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.411-418
• /
• 2000

With the limited amount of budget and time, it is required to determine the priority of investment when there are a large number of hazardous slopes. In this paper, the Rock Slope Risk Rating System is developed based on the combination of the hazard of failure and the damage potential. By applying the proposed rating system to 253 rock slopes in Korean National Highway, it was possible to determine the priority of investment on road cut slopes.

• 지질공학
• /
• 제17권3호
• /
• pp.393-404
• /
• 2007

본 연구는 절리암반사면의 현장상태 및 위험도에 대한 현장조사를 기초로 사면의 상대적 위험도를 판단 할 수 있는 토대를 마련하기 위하여 개별요인이 사면안정성에 미치는 영향을 고찰하였으며 사면붕괴에 영향을 미치는 요인들에 대한 통계적 분석을 수행하였다. 사면의 붕괴요인으로는 기존에 제시된 인장균열, 지반변형, 구조물 변형, 붕괴발생규모, 절리주향, 절리경사, 절리상태, 사면경사, 강우 및 지하수위, 절취상태, 배수조건, 보호보강상태 등 12가지 항목을 고려하였다. 본 연구를 위한 조사지역은 경상남도 지방도로에 위치한 절취사면 중 붕괴 이력이 있거나 다소 불안감을 보이는 위험 절개지 233개소이다. 조사지역의 사면안정성평가는 각각의 평가요인(붕괴요인)에 따른 사면의 결함지수와 사면위험등급에 의해 수행되었다. 조사된 총 233개소의 사면 중 토사사면을 제외한 암반사면 126개소를 선별하여, 각각의 붕괴요인들과 사면위험등급과의 통계적 연관성분석을 실시하였다. 또한, 다중회귀분석을 수행하고 적용성을 고찰하여 사면결함지수와 위험등급을 예측할 수 있는 통계모형을 제시하였다.

• 한국산림과학회지
• /
• 제89권3호
• /
• pp.397-404
• /
• 2000

임도 옆도랑침식에 영향을 미치는 요인의 평가 및 안정도 판별을 위하여 광릉시험림의 임도를 대상으로 조사를 실시한 결과 침식에 미치는 기여순위는 종단물매, 시설위치, 절토사면경사, 절토사면구성물질, 유하거리, 노면형태, 노면재료, 절토사면피복도, 절토사면길이 순으로 나타났다. 임도 옆도랑침식을 유발하는 요인을 평가하면, 종단물매는 8% 이상, 임도시설위치는 산록(山麓)과 중복(中腹), 절토사면경사는 $50^{\circ}$ 이상, 절토사면토성은 견질토사, 자갈섞인 토사, 호박돌섞인 토사, 유하거리는 80m 이상의 지역에서, 그리고 노면재료는 토사도(土砂道)와 자갈부설도에서, 노면형태의 경우에는 철(凸)형과 직선형, 절토사면 피복도(被覆度)는 피복도가 중(中)이상인 곳에서 임도 옆도랑침식이 발생할 가능성이 높은 것으로 예측(豫測)되었다.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.71-75
• /
• 2014

Forest roads failure is one of the most common problems caused by heavy rainfalls. This study investigated the characteristics on stabilization measures installed for cutting slopes failure of forest road resulted from heavy rainfalls. Three primary factors (slope length, slope gradient, soil type) affecting cutting slope failure were considered and stabilization measures were classified into two types (A type: wooden fence, vegetation sandbag, stone masonry; B type: wire cylinder, gabion, concrete retaining wall) through discriminant analysis based on their capacity of resistance to slope failure. Results showed that A type was mainly installed in such conditions as cut slope <8 m, cut slope gradient $30-40^{\circ}$ and soil type with soil while B type occurred in locational conditions as cut slope length >8 m, cut slope gradient < $30^{\circ}$ and > $30^{\circ}$, and soil type of gravelly soil and rock.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.589-592
• /
• 2008

울산광역시 울주군 상북면에서 경상남도 밀양시 산내면을 잇는 국도 24호선은 왕복 2차선으로 기존 도로의 선형이 매우 불량하고, 위험절토사면이 집중적으로 분포되어 있다. 2002년에는 관련기관과의 연계로 울주-밀양 간 국도 24호선의 도로절토사면에 대한 현황조사가 실시되었으며, 그 중 57개소 현장은 위험절토사면으로 분류하여 추가적인 상세 현장조사가 실시되었으며, 불연속면의 방향에 관한 다양한 정보들이 취득되었다. 2002년에는 관련기관과의 연계로 울주-밀양 간 국도 24호선의 도로절토사면에 대한 현황조사가 실시되었으며, 그 중 57개소 현장은 위험절토사면으로 분류하여 추가적인 상세 현장조사가 실시되었으며, 불연속면의 방향에 관한 다양한 정보들이 되었으며, 이에 대한 길이별, 경사별 분포현황, 불연속면 발달상태 등 여러제반 특성을 살펴 보았다.

• Journal of Electrical Engineering and Technology
• /
• 제4권1호
• /
• pp.143-148
• /
• 2009

About 70% of Korea consists of mountainous areas, and during the construction of many roads and railroads, cut slopes are inevitably formed. The rainy season, frost heaving in winter, and thawing in spring can all cause rockfalls and landslides. The failure of these slopes is increasing every year, causing damage to vehicles, personal injury and even death. To protect people and property from such damage, a real-time monitoring system is needed to detect the early stages of slope failures. The GMG placed TRS sensor units in the slopes to monitor them in real-time. But due to its reliance on data lines and power lines, the system is vulnerable to lightning damage. The whole system can be damaged by a single lighting strike. Consequently, for the purposes of this paper we propose the use of the Ubiquitous Sensor Network (USN) which follows the IEEE 802.1.4. By using the USN system we can minimize lightning damage and can monitor the movement of the slopes consistently.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.229-240
• /
• 2006

Most of rock slopes contain a lot of discontinuities which have a specific direction and various characteristics. In general, the collapses of the rock slopes occur when the sliding dip of the discontinuity is higher than the internal friction angle and also smaller than the free-air plane of the slope. If a general slope theory is only considered in the case of field exploration of the slopes, there is a possibility that dangerous slopes might be estimated as stable slopes. We mention problems that can easily fail to notice something in field exploration and propose the alternatives to solve the problems through the case studies.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.213-220
• /
• 2000

Numerical modeling of cut slope has some limits in simulating the real slopes. In the case of 2D analysis of slope stability, it is assumed that slope is simply straight even when it is concave or convex in plan view. In this study, 3D analysis in curved shape slopes has been conducted for the comparison with 2D analysis in terms of failure mode and factor of safety. For this, 3D analysis by FLAC3D was compared with 2D analysis in plane strain condition and axi-symmetric model condition by FLAC. It was also observed how safety factors of slopes were affected by the variation of the tensile strength and cohesion, which are important variables to decide whether the slope fails or not. 2D analysis of concave slopes under plane strain condition showed much smaller safety factors by 16-40 % errors depending on the radius of curvature of slopes, compared to the more realistic values from 3D analysis. In case of convex slopes, the lower values by 7-10 % has been reported. 2D analysis of axi-symmetric model showed also smaller safety factors by 6-10 % and by 2-4 %, in case of concave and convex slopes, respectively. Such results are expected to contribute to the better understanding of failure process and could be applied for improved design of slopes.

• 한국환경복원기술학회지
• /
• 제19권2호
• /
• pp.121-135
• /
• 2016

The present study is an analysis of the monitoring results of the four areas that underwent the experimental construction of Straw-net+seedspray, Vegetation media spray method(t=2cm), and Vegetation media spray method(t=3cm), with the purpose of selecting the adequate revegetation of cutting slopes in weathered granite soil. Cutting slopes are mostly designed in the Straw-net+seedspray method, but since weathered granite soil slopes tend to have an infertile soil quality that runs down, it is difficult for seed germination and growth. It is difficult to apply Straw-net+seedspray to weathered granite soil slopes considering the germination rate and coverage rate of the Straw-net+seedspray method, which accompanies erosion and scouring. The final conclusions are summarized as follows. First, Straw-net+seedspray has difficulty recruiting plants to infertile weathered granite soil, which results in a lower coverage rate and fewer species, so it is not adequate construction method. Second, Vegetation spraying methods with wet media are more advantageous in early revegetation. The wet construction methods are faster than the dry construction methods in terms of early germination and its early growth are more excellent. Third, when constructing Vegetation spray methods with dry media, it were more advantageous if the thickness was thicker. When the soil-media is thicker, the soil is resilient to droughts, so the thickness must be flexibly applied according to the soil quality and slant of the weathered granite soil slope. The present study is a monitoring result for some areas of Gangwon-do, so its results may differ from other areas.