• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.91-98
• /
• 2020

Purpose: This study is to compare the flexural strength and modulus by inserting a mesh and stick type fiberglass reinforcement into resin specimens. Methods: Wax specimens (length 64 mm, width 39 mm, thickness 5 mm) are prepared according to ISO 20795-1:2013. Mesh type and stick type glass fiber reinforcements were prepared. The prepared wax specimens were used plaster and flask for investment. The flask was separated and the wax was removed. The heat curing resin was injected into the flask, and then a mesh type and stick type fiberglass reinforcement were inserted. The prepared resin specimen was cut into three equal parts (length 64 mm, width 10 mm, thickness 3.3 mm). The mesh type glass fiber reinforcement (MT group) and the stick type glass fiber reinforcement (ST group) were classified into two groups. The prepared specimen was measured using a universal testing machine (UTM). The data were analyzed by Mann-Whitney U test, and the significance level was set to 0.05. Results: In the flexural strength, the ST group was higher than the MT group, and there was a significant difference between the two groups (p<0.05). In the flexural modulus, the ST group was higher than the MT group, and there was a significant difference between the two groups (p<0.05). Conclusion: The stick-type glass fiber inreased the flexural strength than the mesh-type glass fiber reinforcement.

• 방송공학회논문지
• /
• 제16권1호
• /
• pp.44-53
• /
• 2011

본 논문에서는 depth layer partition을 이용한 2D 동영상의 자동 3D 변환 기법을 제안한다. 제안하는 기법에서는 먼저 2D 동영상의 장면 전환점을 검출하여 각각의 프레임 그룹을 설정하여 움직임 연산 과정에서의 오류 확산을 방지하여 깊이맵(depth map) 생성과 정에서 오차를 줄여준다. 깊이정보는 두 가지 방법으로 생성되는데 하나는 영역 분할과 움직임 정보를 이용하여 깊이맵을 추출하는 것이고 다른 하나는 에지 방향성 히스토그램(edge directional histogram)을 이용하는 방법이다. 제안하는 기법에서는 객체와 배경을 분리하는 depth layer partition 과정을 수행한 후 생성된 두 개의 깊이맵을 원 영상에 최적이 되도록 병합하게 된다. 제안된 기법으로 신뢰도 높은 깊이맵과 결과 영상을 생성할 수 있다는 것을 다양한 실험 결과를 통해 알 수 있다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권12호
• /
• pp.6319-6325
• /
• 2012

We previously found cytotoxic effects of tomato leaf extract (TLE) on the MCF-7 breast cancer cell line. The aim of this study was to ascertain the molecular mechanisms associated with the usage of TLE as an anticancer agent by microarray analysis using mRNA from MCF-7 breast cancer cells after treatment with TLE for 1 hr and 48 hrs. Approximately 991 genes out of the 30,000 genes in the human genome were significantly (p<0.05) changed after the treatment. Within this gene set, 88 were significantly changed between the TLE treated cells and the untreated MCF-7 cells (control cells) with a cut-off fold change >2.00. In order to focus on genes that were involved in cancer cell growth, only twenty-nine genes were selected, either down-regulated or up-regulated after treatment with TLE. Microarray assay results were confirmed by analyzing 10 of the most up and down regulated genes related to cancer cells progression using real-time PCR. Treatment with TLE induced significant up-regulation in the expression of the CRYAB, PIM1, BTG1, CYR61, HIF1-${\alpha}$ and CEBP-${\beta}$ genes after 1 hr and 48 hrs, whereas the TXNIP and THBS1 genes were up-regulated after 1 hr of treatment but down-regulated after 48 hrs. In addition both the HMG1L1 and HIST2H3D genes were down-regulated after 1 hr and 48 hrs of treatment. These results demonstrate the potent activity of TLE as an anticancer agent.

• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.29-37
• /
• 2008

도로 및 철도 건설에서 적용되는 터널의 단면크기는 $50m^2$에서부터 $200m^2$의 중 대단면 터널이 주를 이루고 있으나, 전력구, 통신구, 광산용 터널, 용수를 위한 도수로터널 등 특수한 용도로 설계, 시공되고 있는 터널에서는 $20m^2$이하의 단면크기를 갖는 경우가 많다. 소단면 터널의 경우에는 협소한 작업공간으로 인하여 적용공법 뿐만 아니라 장비의 사용 또한 제약을 받게 되어 작업효율이 저하되고 공사기간이 늘어나게 되는 등 여러 가지 문제점을 안고 있다. 특히, 에멀젼 폭약을 사용하는 발파에서 먼저 기폭된 발파공의 충격압력에 의해 인접공의 폭약이 예비압축되어 사압현상을 일으키고 잔류약을 발생시키는 사례가 종종 발생하고 있다. 사압현상은 발파의 실패와 함께 2차적인 사고의 위험요인이 될 수 있으므로 이를 방지하기 위한 대책을 수립하여야 한다. 기존 문헌을 통하여 사압현상의 원인과 발생 가능성을 검토하였고, 사압현상이 발생한 소단면 터널현장을 대상으로 그 대책을 수립하여 적용하였다. 심발방법을 변경하여 전단의 충격압력을 견딜 수 있는 공간격을 확보하고 뇌관의 초시간격을 적절하게 배치한 발파패턴을 적용한 결과, 사암현상을 억제하고 잔류약의 발생을 감소시켜 계획 굴진장을 확보하였으며 파쇄석의 크기를 감소시키는 등 양호한 결과를 얻을 수 있었다.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.279-288
• /
• 2012

The material removal mechanism in machining is significantly affected by the cutting edge geometry. Its effect becomes even more substantial when the depth of cut is relatively small as compared to the characteristic length which represents the shape and size of the cutting edge. Conventionally, radius or focal length has been employed as the characteristic length with the assumption that the shape of cutting edge is round or parabolic. However, in reality, there could be various ways to determine the radius or focal length even for the same tool edge profile, depending on the region to be considered as cutting edge in the measured profile and the constraints to be set in constructing the best fitted circle or parabola. In this regard, the present study proposes various models to determine the characteristic length in terms of radius or focal length. Their physical compatibility are validated by carrying out 2D orthogonal cutting experiments using inserts with a wide range of characteristic length ($30{\sim}180\;{\mu}m$ in terms of radius) and then by investigating the correlation between the characteristic length and the cutting forces. Such validation is based on the common belief that the larger the characteristic length is, the blunter the cutting edge is and the higher the cutting forces are. Interestingly, the results showed that the correlation is higher for the radius or focal length obtained with a constraint that the center of best fitted circle or the focus of the best fitted parabola should be on the bisectional line of the wedge angle of tool.

• 한국포장학회지
• /
• 제26권2호
• /
• pp.53-60
• /
• 2020

A concept of household container to create and keep the modified atmosphere (MA) beneficial for fresh produce mix was devised and tested under typical chilled storage conditions of 3℃. The container system containing mixed products is initialized by applying weak hypobaric condition (0.9 atm) and subsequently injecting CO₂ gas at an appropriate low level (0.03 atm). The passive atmosphere modification by produce respiration is then induced to reach a target until gas diffusion tube of proper dimension starts to open. The design was made to attain quasi-steady state mass balance of O₂, CO₂ and N₂ to maintain the desired MA through the storage. Interrupted opening for taking out or placing some products was to reinitialize the loop of control logic. The developed concept was tested by the container which held commodities of spinach, pak choi, oyster mushroom, peeled onion, strawberry and cut carrot. The target optimum MA of 11% O₂ and 10% CO₂ (0.11 and 0.10 atm, respectively) was set to avoid injurious range of O₂ and CO₂ concentrations for any commodities. The developed container system could work to reach and maintain beneficial MA of 0.10-0.12 atm O₂ and 0.07-0.10 atm CO₂ close to the target during the storage contributing to quality retention of products measured in weight loss, chlorophyll content of spinach, ascorbic acid content of pak choi, color of onion, texture of oyster mushroom, bacterial count of strawberry and carotenoids of carrot. The container system shows potential to improve current preservation practice of fresh produce mix on consumers' level.

• 한국화재소방학회논문지
• /
• 제18권3호
• /
• pp.57-73
• /
• 2004

Pilot LNG Tank에서 LNG가 누출되어 화재가 발생할 경우의 정량적 안전성 평가를 고장수목법을 이용하여 4가지 형태의 주요 시나리오를 도출하고 이에 대한 분석을 수행하였다. 첫째 방출관에서 누출할 경우에 특정 Low Flammable Limit(LFL)반경은 형성하지 않았으며, 둘째는 탱크파손으로 인한 LNG 유출이라는 최악의 시나리오 분석을 수행하였고, 그 결과를 살펴보면 총 누출량이 같더라도 시간에 따라 여러 가지 확산범위가 나타남을 확인할 수 있었다. 셋째는 inlet/outlet파이프의 손상으로 인한 누출로 10달과 타분 두 경우에 대해 분석하였으나, 각각의 경우 LFL의 반경은 큰 차이를 보이지 않았다. 따라서, 이와 같은 LNG누출 사고의 경우 초기 방출량의 크기가 확산의 주요 인자임을 알 수 있었다. 넷째는 방류둑에서 LNG배관이 파손될 경우 LFL의 크기를 산출하였다. 한편 복사열 및 불꽃의 크기에 대한 피해결과 분석을 동시에 수행하였다.

• Asian Journal of Atmospheric Environment
• /
• 제12권1호
• /
• pp.78-86
• /
• 2018

Filter-based sampling techniques are the conventional way to collect particulate matter, but particles collected and entangled in the filter fibers are difficult to be removed and thus not suited for the following cell- and animal-based exposure experiments. Collecting aerosol particles in powder form using a cyclone instead of a filter would be a possible way to solve this problem. We developed a hybrid virtual-impactor/cyclone high-volume fine and coarse particle sampler and assessed its performance. The developed system achieved 50% collection efficiency with components having the following aerodynamic cut-off diameters: virtual impactor, $2.4{\mu}m$; fine-particle cyclone, $0.18-0.30{\mu}m$; and coarse-particle cyclone, $0.7{\mu}m$. The virtual impactor used in our set-up had good $PM_{2.5}$ separation performance, comparable to that reported for a conventional real impactor. The newly developed sampler can collect fine and coarse particles simultaneously, in combination with exposure testing with collected fine- and coarse-particulate matter samples, should help researchers to elucidate the mechanism by which airborne particles result in adverse health effect in detail.

• 정보처리학회논문지B
• /
• 제10B권6호
• /
• pp.611-618
• /
• 2003

본 논문에서는 퍼지 추론 방법을 이용하여 비디오 데이터에서 샷(shot)의 경계를 검출하는 방법을 제안한다. 제안된 방법에서는 컷(cut), 페이드(fade), 디졸브(dissolve)와 같은 샷의 경계들을 검출하고, 이들을 그 종류별로 분류하기 위해 기본적으로 퍼지 연상 기억장치를 확장한 퍼지 추론 방법을 이용한다. 본 논문에서는 연속적인 두 영상 사이의 차이를 나타내는 여러 특징들을 입력 퍼지 집합으로 사용하고, 샷 경계들을 출력 퍼지 집합으로 사용한다. 본 논문의 퍼지 추론 시스템은 크게 학습 단계와 추론 단계의 두 단계로 구성된다. 학습 단계에서는 퍼지 소속 함수의 결정을 통해 시스템의 기본 구조를 초기화하고 이를 바탕으로 퍼지 연상 기억장치의 학습 기능을 이용하여 퍼지 규칙을 조건부와 결론부를 연결하는 가중치의 형태로 생성한다. 그리고 추론 단계에서는 구성된 퍼지 추론 모델을 이용하여 실제 추론을 수행한다. 실험에서는 제안된 샷 경계 검출 방법의 성능을 확인하기 위해서 뉴스, 영화, 광고, 다큐멘터리, 뮤직 비디오 등의 비디오 데이터들을 활용하였다.

• 패션비즈니스
• /
• 제3권3호
• /
• pp.39-48
• /
• 1999

The purpose of this study is to examine closely the aesthetic characteristics featured in dandy's costume. Dandy was term used on for a man excessively fond of and overly concerned with clothes, exemplified by Beau Brummell, Lord Byron, and count d'Orsay, who greatly in gluenced men's fashions in England and France. In the late eighteenth and early nineteenth century George Brummell, the prototype of the dandy, made upper-class English country clothes, especially riding clothes, into the height of men's fashion in the city. In the early 1800s the alterations he made, particularly with regard to fit and cut, established these as the critical signifiers in men's dress. Brummell's style, particularly for day, was essentially restrained and disciplined, and set a standard for sober discretion, appropriateness and taste which governed men's clothing until well into the twentieth century. The aesthetic characteristics expressed in dandy's dress are the aristocratic superiority of mind, the restrained beauty in absolute simplicity, and the pursuit of the individual beauty. Brummell's kind of dandyism instigated the idea of establishing a new kind of aritocracy, an aritocracy based on talent. Over the years this kind of cultural and social coup has been played out in different ways but has remained, like the twentieth-century concept of the avant-garde, a fundamentally male preserve. He advocated unobtrusive darkblue fitted coats, cream-colored trousers, elaborately tied cravats, absence of showy fabrics or excessive decoration, and impeccable grooming. The status of the perfectly tied cravat as the hallmark of genteel elegance, as the last keystone of Fashion's arch, had been established by Beau Brummell.