• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• Journal of Electrical Engineering and Technology
• /
• 제4권1호
• /
• pp.143-148
• /
• 2009

About 70% of Korea consists of mountainous areas, and during the construction of many roads and railroads, cut slopes are inevitably formed. The rainy season, frost heaving in winter, and thawing in spring can all cause rockfalls and landslides. The failure of these slopes is increasing every year, causing damage to vehicles, personal injury and even death. To protect people and property from such damage, a real-time monitoring system is needed to detect the early stages of slope failures. The GMG placed TRS sensor units in the slopes to monitor them in real-time. But due to its reliance on data lines and power lines, the system is vulnerable to lightning damage. The whole system can be damaged by a single lighting strike. Consequently, for the purposes of this paper we propose the use of the Ubiquitous Sensor Network (USN) which follows the IEEE 802.1.4. By using the USN system we can minimize lightning damage and can monitor the movement of the slopes consistently.

• 한국주조공학회지
• /
• 제28권3호
• /
• pp.136-140
• /
• 2008

A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy, was introduced to produced an integrated casting part having a complicated inner shape or requiring under-cut in high pressure die casting or squeeze casting process. The main goal of this study is to develop a new integrated net-shape forming technology using fusible core of lower melting temperature than that of a casting alloy. This integrated net-shape forming technology would be very successful and cost-effective for producing the integrated products having a complicated inner shape or requiring under-cut. The technology for measuring and evaluating a various property of fusible core such as a thermal conductivity and thermal expansion coefficient, melting temperature was established. Also, the work space can be cleaned without a pollution inducing products.

• 한국산림과학회지
• /
• 제98권5호
• /
• pp.539-547
• /
• 2009

This study was conducted to investigate the arbuscular mycorrhizal fungal biodiversity, spore density and root colonization in relation to site ages at expressway cut-slopes in Korea. Stabilization of exposed surface involved soil amendments and spraying seed mixture of turf grasses and/or nitrogen-fixing shrub species. Eighteen sites were selected with varying ages (2 to 16 years). Soil samples collected in October from each site were analyzed for fungal diversity and spore counts. Fine root samples from the plants were assayed for fungal colonization. Of the total 37 plants inspected in the sites, 26 species had endomycorrhizal colonization with an average root colonization rate of 18%, and with a range from 1 to 67%. The average endomycorrhizal colonization rate of initially introduced Festuca arundinacea which became the most dominant grass in later stage showed 22.8%, while that of Lespedeza bicolor which became the most dominant woody species were 21.6%. Naturally-invading Robinia pseudoacacia showed higher colonization rate in the old sites. Although site age did not show significant effects on fungal diversity, the root colonization rates of initially introduced plants decreased with the site aging, while those of invading plants increased with aging of the sites. The soil chemical properties, pH, N, and P contents, were negatively correlated with spore density, root colonization and endomycorrhizal species diversity. A total of forty arbuscular mycorrhizal fungal species in seven genera were identified. Of the 40 species, Acaulospora lacunosa, Glomus aggregatum, Glomus constrictum, Scutellospora erythropa, and Acaulospora spinosa were the five most dominant species in the decreasing order.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.257-262
• /
• 2017

본 논문에서는 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나에 하프 커팅과 불연속 급전 구조를 적용하여 안테나 특성을 확인하였다. 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나를 자기 대칭 라인을 중심으로 하프커팅을 하고, 급전부에 불연속 구조를 적용과 이중 슬리브 간격을 조정하여 임피던스 매칭을 하였다. 안테나 파라미터 특성을 확인하기 위하여 ANSYS사의 HFSS 시뮬레이터를 이용하였고, 안테나 크기는 $21{\times}40mm^2$이다. 제안한 안테나에서 VSWR이 2 이하인 시뮬레이션 주파수 대역은 2.6GHz~10.25GHz이다. 주파수 대역폭은 7.65GHz이다. 실제로 제작한 안테나의 주파수 대역은 3.3GHz~9.75GHz이며, 주파수 대역폭은 6.45GHz이다. 측정된 복사패턴 주파수는 3.5GHz, 5.5GHz, 7.5GHz, 9.5GHz이다. 모든 주파수에서 다이폴안테나 패턴과 유사한 복사패턴 결과를 얻을 수 있었다.

• 한국지반공학회논문집
• /
• 제22권6호
• /
• pp.27-40
• /
• 2006

개착식 터널라이닝의 파괴 원인은 물리적 요인과 공학적 요인으로 나눌 수 있다. 물리적 요인으로서는 재료특성, 보강재 부식 등이 있으며, 공학적 요인은 수압과 교통진동 등이 있다. 본 연구에서는 공학적 요인 중 부가하중 즉, 공사를 완료한 뒤에 라이닝의 변형 및 파괴를 유발하는 증가 토압에 초점이 맞추어져 있다. 증가 토압은 되메움토의 다짐 불량, 자중 및 강우에 의한 침하, 교통하중에 의한 진동 등이 원인이 되어 발생한다. 본 연구는 모래 지반에 $1.0D{\sim}1.50D$ 깊이에 개착식으로 시공하는 원형의 강성 터널에 작용하는 토압에 관한 것으로 진동다짐의 영향을 모형 실험에서 충분히 반영하기 위하여 100Hz의 진동주파수를 사용하였다. 본 연구에서는 개착식 터널 라이닝에 작용하는 토압과 주변 지반의 변형 양상을 파악하고 기존 토압 계산공식을 검토하기 위해 실내 터널모형실험을 실시하였으며, 개착식 터널 라이닝에 작용하는 측정 토압과 토압공식에 의해 산출한 토압을 비교 분석하여 기존 공식에 대한 안전율을 제시하였다.

• 가정과삶의질연구
• /
• 제13권4호
• /
• pp.115-124
• /
• 1995

The purpose of this study was to accept its contents as lessons for today and to search for the correct way to lead home economy of the future by way of retranslating home economic view in literatures and documents of Cho-sun Dynasty(1392-1910) Through studying Cho-sun's literatures and documents: 「Ne-hun」 by the queen So He 「Kyou-dyoung-yo-ram」by Lee Whang 「Kyung-mong-yo-kul」by Lee Yul 「Song-ho-sa-sul」by Lee IK 「Sa-so-jol」by Lee Duk Moo「Buk-hak-ee」 by Park Je Ka 「Mok-min-sim-su」 by Jung Yak Yong. The results of this study can be summarized as follows : 1. The view of income: 1) Cut down on the too much greed of property (property income) 2) Work hard with diligence(earned income). 2. The view of expense : 1) Get food clothing and housing with frugality 2) Spend money for home rites and reception of guests with manner and truth without extravagnace. 3. The view of buying and selling: Buy and sell with credit. 4. The view of borrowing and lending: Borrow and lend money honestly,. 5. The view of home book-keeping : Keep home book-keeping every day. 6. The view of economic preparation : Save for a rainy day wisely.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.300.2-300.2
• /
• 2016

Increasing of the demand for energy savings for buildings, thermal barrier films have more attracted. In particular, as heat loss through the windows have been pointed out to major problems in the construction and automobile industries, the research is consistently conducted for improving the thermal blocking performance for windows. The main theory of the technology is reflect the infrared rays to help the cut off the inflow of the solar energy in summer and outflow of the heat from indoors in winter to save the energy on cooling and heating. Furthermore, this is well known for prevent glare, reduces fading caused by harmful ultraviolet radiation and easy to apply on constructed buildings if it made as a film. In addition to these advantages, apply the transparent electrode to eliminate condensation by heating. Generally ITO is used as a transparent electrode, but is has a low stability in environmental factors. In this study, ITO and its alternative, ATO, is deposited by sputtering system and then the characteristic is evaluated each material based thermal barrier thin film. The optical property was measured on wide range of wavelength (200 nm 2500 nm) to know the transparency in visible wavelength and reflectivity in IR wavelength range. The electrical property was judged by sheet resistivity. Finally the changes of the temperature and current of the deposited film was observed while applying a DC power.

• 한국산림과학회지
• /
• 제105권4호
• /
• pp.435-440
• /
• 2016

경상남도 하동군 옥종면 청룡리 땅밀림 산사태지의 인장균열 형성과 그에 따른 토양 물리성 변화를 조사한 결과, 주 인장균열과 국부적 인장균열의 단차와 절취경사는 차이가 없는 것으로 나타났다. 토양 물리성 변화의 경우에는 토양깊이 31~40 cm의 액상이 유의적 차이를 나타내었다. 한편, 액상은 미교란지와 교란지에서 유의적 차이가 나타났는데, 이는 입지요인에 의한 것으로 판단되다. 따라서 하동군 옥종면의 땅밀림 산사태지에서는 붕괴과정 중 토괴가 일체로 미끄러지며, 단적으로는 토양 물리성 변화도 크게 나타나지 않는 것으로 나타났다. 이에 따라 땅밀림 산사태에 대한 보다 연계성 있는 연구가 진행되어야 할 것이다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.227-235
• /
• 2000

Agricultural products are easily deformable its shape because of some external forces. However, these force behavior is difficult to measure quantitatively. Until now, many researches on the mechanical property was performed with various methods such as material testing, chemical analysis and non-destructive methods. In order to investigate force behavior on the cellular unit of agricultural products, electro-microscope based 3D image processing method will contribute to analysis of plant cells behavior. Before image measurement of plant cells, plant sample was cut off cross-sectioned area in a size of almost 300-400 ${\mu}$ m units using the micron thickness device, and some of preprocessing procedure was performed with fixing and dyeing. However, the wall structure of plant cell is closely neighbor each other, it is necessary to separate its boundary pixel. Therefore, image merging and shrinking algorithm was adopted to avoid disconnection. After then, boundary pixel was traced through thinning algorithm. Each image from the electro-microscope has a information of x,y position and its height along the z axis cross sectioned image plane. 3D image was constructed using the continuous image combination. Major feature was acquired from a fault image and measured area, thickness of cell wall, shape and unit cell volume. The shape of plant cell was consist of multiple facet shape. Through this measured information, it is possible to construct for structure shape of unit plant cell. This micro unit image processing techniques will contribute to the filed of agricultural mechanical property and will use to construct unit cell model of each agricultural products and information of boundary will use for finite element analysis on unit cell image.