Effect of Applying Pressure of High Pressure Diecasting Process Using Salt core

용탕단조 시 저온염코어 적용 가압력의 영향

  • Lee, Jun-Ho (R & D Division for Hyundai Motor Co. & Kia Motors Corp.) ;
  • Moon, J.H. (R & D Center, Dong Yang Piston Co., LTD.) ;
  • Lee, Dock-Young (Division of Materials, Korea Institute of Science and Technology)
  • 이준호 (현대자동차 기술연구소) ;
  • 문중화 (동양피스톤(주)) ;
  • 이덕영 (한국과학기술연구원 기능금속재료연구센터)
  • Published : 2008.05.20

Abstract

A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy, was introduced to produced an integrated casting part having a complicated inner shape or requiring under-cut in high pressure die casting or squeeze casting process. The main goal of this study is to develop a new integrated net-shape forming technology using fusible core of lower melting temperature than that of a casting alloy. This integrated net-shape forming technology would be very successful and cost-effective for producing the integrated products having a complicated inner shape or requiring under-cut. The technology for measuring and evaluating a various property of fusible core such as a thermal conductivity and thermal expansion coefficient, melting temperature was established. Also, the work space can be cleaned without a pollution inducing products.

Keywords

References

  1. Fatih Cay, S. Can Kurnaz, Mater. & Design, "Hot tensile and fatigue behaviour of zinc-aluminum alloys produced by gravity and squeeze casting", 26 (2005) 479-485 https://doi.org/10.1016/j.matdes.2004.07.023
  2. T. M. Yue, Jour. of Mater. Process. Tech., "Squeeze casting of high-strength aluminium wrought alloy AA7010", 66 (1997) 179-185 https://doi.org/10.1016/S0924-0136(96)02516-2
  3. Z.W. Chen, W.R. Thorpe, Mater Sci. and Eng. A, "The effect of squeeze casting pressure and iron content on the impact energy of Al-7Si-0.7Mg alloy", 221 (1996) 143-153 https://doi.org/10.1016/S0921-5093(96)10496-2
  4. M.A. Sava , S. Altinta , Mater. Sci. and Eng. A, "Effects of squeeze casting on the wide freezing range binary alloys", 173 (1993) 227-231 https://doi.org/10.1016/0921-5093(93)90220-9
  5. P.V. Evans, R. Keyte, R.A. Ricks, Mater. &Design, "Squeeze casting of aluminium alloys for near net shape manufacture", 14 (1993) 65-67 https://doi.org/10.1016/0261-3069(93)90050-6
  6. A Bloyce, J.C Summers, Mater. Sci. and Eng. A, "Static and dynamic properties of squeeze-cast A357-SiC particulate Duralcan metal matrix composite", 135 (1991) 231-263 https://doi.org/10.1016/0921-5093(91)90568-8
  7. M. R. Ghomashchi, K. N. Strafford, Jour. of Mater. Process. Tech., "Factors influencing the production of high integrity aluminium/silicon alloy components by die and squeeze casting processes", 38 (1993) 303-326 https://doi.org/10.1016/0924-0136(93)90204-J