• 한국기계가공학회지
• /
• 제5권4호
• /
• pp.59-64
• /
• 2006

High Speed Machining(HSM) reduces machining time and improves surface accuracy because of the high cutting speed and feedrate. Development of HSM makes it allowable to machine difficult-to-cut material and use small-size-endmill. It is however limited to cutting condition and tool material. In the machining operation, it is important to check main parameter of tool life and select optimal cutting condition because tool breakage can interrupt progression of operation. In this study, cutting parameters are determined to 3 factors and 3 levels which are a spindle speed, a feedrate and a width of cut. Experiment is designed to orthogonal array table for L9 with 3 outer array using Taguchi method. Also, it is proposed to inspect significance of the optimal factors and levels by ANOVA using average of SN ratio for tool life. Finally, estimated value of SN ratio in the optimal cutting condition is compared with measured one in the floor shop and reduction of loss is predicted.

• 복식
• /
• 제44권
• /
• pp.104-116
• /
• 1999

This study was intended to make an inquiry into the effect of lines, shapes and colors (achromatic colors) as apparel design elements on the perceptions of facial size, brightness and shape through an empirical research based on the theories of visual perception and optical illusion that have been studied in Gestalt Psychology, which becomes the basis of apparel design principles. It was shown that the facial size was influenced by the collar size, the degree of neckline cut, and the thickness of the trimming line. The white scarf with the white jacket made the face look darkest while the black scarf with the black jacket made the face look brightest. When the neckline had the characteristic of the line contrasted with the facial shape, the oval-shaped face was perceived to be the most ideal. When the facial shape and the neckline shape were similar, the facial shape was perceived to be more highlighted.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.128-139
• /
• 1998

In this paper, a finite element method for predicting the temperature and stress distributions in micro-machining is presented. The work material is oxygen-free-high-conductivity copper(OFHC copper) and its flow stress is taken as a function of strain, strain rate and temperature in order to reflect realistic behavior in machining process. From the simulation, a lot of information on the micro-machining process can be obtained; cutting force, cutting temperature, chip shape, distributions of temperature and stress, etc. The calculated cutting force was found to agree with the experiment result with the consideration of friction characteristics on chip-tool contact region. Because of considering the tool edge radius, this cutting model using the finite element method can analyze the micro-machining with the very small depth of cut, almost the same size of tool edge radius, and can observe the 'size effect' characteristic. Also the effects of temperature and friction on micro-machining were investigated.

• 한국주거학회논문집
• /
• 제21권5호
• /
• pp.137-144
• /
• 2010

The purpose of this study is to clarify locational characteristics and the road systems of existing 22 old settlements in Cheongju downtown of Korea. These old settlements are classified largely into two types by geographical feature; Hill type located in ridge and Valley type in the valley from the ridge. The Hill type is further categorized into San-rock located on ridge and Gogae located on hillside, and the Valley type into closed large and small valley, that is, Daegok and Sogok by the shape and size of the valley. The road systems are classified into outer road, approaching road, inner road, and side road. In San-rock type villages, Inner road is changed side roads by new arterial road, and new ones become inner road. The outer road are almost cut off, but side roads maintain. In the case of the Gogae type, main road becomes inner road, maintain old hierarchical road, and in other cases, villages are formed around side roads derived from main road, and outer road and inner road are cut off. Among the Valley type, Daegok type maintains old hierarchical road, while for Sogok type, outer roads are cut off, and new roads are outer road.

• 응용통계연구
• /
• 제14권1호
• /
• pp.111-120
• /
• 2001

하나의 업종에 대한 경영실태조사에서 모집단을 구성하는 기업체들의 규모가 큰 차이가 없다고 판단되면 계통추출법이나 층화확률추출법을 주로 적용할 수 있으나 일부기업체의 합계가 모총계의 상당히 큰 부분을 차지하는 경우에는 절사계통추출법이 효율적이다. 본고에서는 위 세 가지 추출법에 의한 모총계 추정량과 모총계 추정량의 분산의 추정법을 살펴보고, 세 가지 추출법을 비교하여 절사계통추출법의 효율성을 실제 자료인 벌목업 경영실태 조사자료를 통해서 입증하였다.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.152-155
• /
• 2013

본 논문은 위성방송 수신용 소형 파라볼라 안테나의 높이를 보다 낮추기 위하여 반사면의 상하 부분을 부분적으로 절단하였을 때 나타나는 spill-over 의 증가로 인한 성능지수의 저하를 분석하였다. 또한 안테나를 고도각 0도부터 60도까지 트래킹하는 경우에 측엽과 후엽이 받는 대지면 열잡음의 증가로 인한 잡음온도의 영향을 고려하고, LNA 의 잡음지수로 인한 총 잡음온도의 증가 영향을 고려하여 성능지수 값을 시뮬레이션하여 그 결과를 분석하였다. 분석 결과, 원형 파라볼라의 반사면 상하부분을 35% 절단하였을 때, 잡음온도는 약 15K 정도 증가하였으며, G/T 비는 2.5dB 정도 저하하였다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권4호
• /
• pp.248-254
• /
• 2013

The size and power consumption of digital circuits including the dimming circuit part will increase for high-performance solid state lighting (SSL) systems in the future. This study examined the low-power consumption of adiabatic dynamic CMOS logic (ADCL) due to the principles of adiabatic charging. Furthermore, the designed low-power ADCL digital pulse width modulation (PWM) was optimized for SSL dimming systems. For this purpose, an ADCL digital 3-bit PWM was optimized in two steps. In the first step, the architecture of the ADCL digital 3-bit PWM was miniaturized. In the second step, the clock cut-off circuit was designed and added to the ADCL PWM. As a result, compared to the original configuration, 60 transistors and 15 capacitors of ADCL digital 3-bit PWM were reduced for miniaturization. Moreover, the clock cut-off circuit, which controls wake-up and sleep mode of ADCL D-FFs, was designed. The power consumption of an optimized ADCL digital PWM for all bit patterns decreased by 54 %.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.46-52
• /
• 2018

Slitting, which is supposed to be one of the most critical processes in Li-Ion battery manufacturing, is supposed to cut off the uncoated parts of the foil, and cut the wide foils into the size of the Li-ion batteries. Vibrations of slitting machines are the most critical factors for uneven cut surface such as surface roughness and burr, which are the main reasons of the tearing of microporous membranes to separate the cathodes and the anodes, and eventually causing explosion of the batteries. In this study, the structure of a slitting machine has been analyzed through computer simulations to figure out the main reasons of the vibrations. The result of the study shows that simple design alterations of the supporting area and roller without modifying the main structure of the machine can suppress the vibrations effectively, and further to prevent the devastating explosion.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2022년도 추계학술대회
• /
• pp.62-62
• /
• 2022

Freesia has been an important worldwide cut flower because of its fragrance, long vase life and the wide color range of the flower. The conventional propagation methods by seeds and corms have many disadvantages such as shorter inflorescences with fewer numbers of florets, a reduction in cut flower quality and the accumulation of plant viruses in corms by successive cultivation. Therefore, the conventional propagation systems in Freesia needs to be replaced with tissue cultures to overcome the disadvantages. This study explored an efficient multiplication protocol using the combination of plant growth regulators (PGRs) for developed cultivar 'Sunny Gold'. The combination between 6-benzylaminopurin (BA) and α-naphthalene acetic acid (NAA) did not produce new shoots but developed enlarged roots. BA only treatments and the combination between BA and kinetin treatments were effective on shoot multiplication. The highest average number of shoots was 5.3 in the presence of 3 mg/L BA and 0.5 mg/L kinetin. To produce corms and cormlets, proliferated shoots were subcultured on 1/2 Murashige and Skoog (MS) medium supplemented with 90 g/L sucrose, 1 g/L charcoal and 7 g/L plant agar and placed at 4℃ in the dark for 6 months. The small size of corms and comlets were produced. The average number of regenerated comlets was 2.75 per shoot. The results showed that shoot multiplication is more efficient than cormlet regeneration for in vitro freesia proliferation.

• 방사성폐기물학회지
• /
• 제4권3호
• /
• pp.217-226
• /
• 2006

원자력연구소 핫셀의 구조와 오염특성이 조사되었다. SEM 측정결과 핫셀 내부에 부착된 고방사능 분진의 크기는 $0.2{\sim}10{\mu}m$이었다. 사이클론의 최적 Vortex finder의 길이는 49 mm이고, 모의입자 유입속도는 15m/sec가 적합했다. 이때 $3{\mu}m$의 포집효율은 약 85%였다. 모의 입자 유입속도가 15m/sec보다 빠를 때, 포집효율의 증가율은 크지 않았다. 유입가스의 온도가 증가할 때, 포집효율은 약간 감소했다. Vortex finder의 길이가 증가할수록 사이클론내의 압력강하는 커졌다. Cut size diameter는 Reynolds number의 증가와 함께 감소했다. 측정된 Reynolds number에 근거하면, 사이클론 내부는 난류이고 이 난류는 사이클론 내의 압력강하에 원인이 된다고 사료된다. $Stk^{1/2}_{50}$는 Re 값의 증가와 함께 감소하고, Re의 값이 커질 때에서 일정한 값에 수렴했다. 즉, 6000-8000의 Re에서 $Stk^{1/2}_{50}$는 약 0.045를 나타냈다.