• Journal of Korea Water Resources Association
• /
• v.46 no.10
• /
• pp.977-987
• /
• 2013

This study aims to develop a multiple criteria decision making (MCDM) approach for flood vulnerability assessment which considers uncertainty. The flood vulnerability assessment procedure consists of three steps: (1) use the Delphi process to determine the criteria and their corresponding weights-the adopted criteria represent the social, economic, and environmental circumstances related to floods, (2) construct a fuzzy data matrix for the flood vulnerability criteria using fuzzification and standardization, and (3) set priorities based on the number of assessed vulnerabilities. This study uses a modified fuzzy TOPSIS method based on ${\alpha}$-level sets which considers various uncertainties related to weight derivation and crisp data aggregation. Further, Spearman's rank correlation analysis is used to compare the rankings obtained using the proposed method with those obtained using fuzzy TOPSIS with fuzzy data, TOPSIS, and WSM methods with crisp data. The fuzzy TOPSIS method based on ${\alpha}$-cut level sets is found to have a higher correlation rate than the other methods, and thus, it can reduce the difference of the rankings which uses crisp and fuzzy data. Thus, the proposed flood vulnerability assessment method can effectively support flood management policies.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.397-404
• /
• 2000

This study was carried out to investigate the influence of the road structure and site conditions on side-ditch stability of forest road. For experimental purposes, the forest road in the Kwangrung Experimental Forest, Korea Forestry Research Institute, was chosen as a study site. A total of 556 plots wes set up as every longitudinal gradient changing points by belt-transect method. Data of 10 road structural characteristics and side-ditch stability were collected from each plot and analysed by Quantification II. The main factors in order of partial correlation coefficient were longitudinal gradient, road position, inclination of cut-slope, constituent material of cut-slopes, distance of surface flow, cross-sectional shape of road, pavement material, vegetation of cut-slopes and length of cut-slope. The erosion of side-ditch of forest road occurred in the following cases; more than 8% of the longitudinal gradient, road position of hill under side and foot hill, more than $50^{\circ}$ of inclination of cut-slope, constituent material of cut-slopes of hard soil and gravel soil, more than 80m of distance of surface flow, pavement material with earth or gravel, more than medium covered of vegetation of cut-slopes, and the straight and convex form of road-bed.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.623-628
• /
• 2015

Fresh cut vegetables provide convenience and rapidity to consumers. However, they have a weakness with respect to their short shelf-life due to browning and quality degradation via increased respiration. To overcome this problem, the effect of packaging film on the short-term storage of cut kimchi cabbages was investigated. Polypropylene (PP), oriented polypropylene (OPP), and low-density polyethylene (LDPE) films were used as packaging film, and cut kimchi cabbages were stored in the packaging films at $5^{\circ}C$ for 4 weeks. PP film packaging showed the least weight loss and soluble solids loss after 4 weeks. Titratable acidity increased during storage for all samples, however, the increase rate of titratable acidity in PP and OPP film packaging decreased, which was lower than that of LDPE film packaging. Color values decreased over time during storage. In appearance, PP film packaging was better than other films due to their high transparency. In a sensory test, there was no statistical difference among samples. Taken together, the transparent PP film packaging was more effective for short-term storage of cut kimchi cabbages. Thus, this study provides useful information for the selection of packaging materials for cut kimchi cabbage marketing.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.78-83
• /
• 2024

This study was carried out to analyze the effect of changes in the light environment caused by the daylight disturbance on the growth, flowering, and cut flower quality of spray chrysanthemums. The spray chrysanthemum 'Yellow Cap' and 'Pitch PangPang' cultivars for cut flowers were artificially shaded to interfere with 66% of sunlight compared to the non-shading, and then the growing and flowering characteristics, and cut flower yield were investigated accordingly. There was no significant difference in the cut flower yield per unit area between the shading and the non-shading treatments. However, the number of days to flowering was 72.1 days for the 'Yellow Cap' and 65.2 days for the 'Pitch PangPang', which were delayed by 14.1 and 8.9 days, respectively, compared to the non-shading light. In the shading treatment, the flower diameter and the number of flowers also decreased by 10% and 15%, and 30% and 28% for both 'Yellow Cap' and 'Pitch PangPang', respectively. The stem length also decreased by 10% and 20%, the stem diameter by 23% and 37%, and fresh weight by 32% and 33%, respectively. The shading treatment delayed the flowering of chrysanthemums and reduced the growth such as flower diameter, number of flowers, and the length and weight of cut flowers. Based on these results, the daylight disturbance by artificial buildings is expected to reduce the productivity and quality of cut flowers by limiting the light intensity needed for chrysanthemum growth, flower bud differentiation, and flower development. Therefore, further research is needed on the rate of decrease in yield and market value according to the degree of shading to relieve damage to chrysanthemum growers caused by the daylight disturbance.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.06a
• /
• pp.129-134
• /
• 2003

In this paper, we determine optimal reduction in the lead time and setup cost for some stochastic inventory models. And we propose more general model that allow the backorder rate as a control variable. We first assume that the lead time demand follows a normal distribution. And we assume that the backorder rate is dependent on the length of lead time through the amount of shortages. The stochastic models analyzed in this paper are the classical continuous and periodic review policy models with a mixture of backorders and lost sales. For each of these models, we provide a sufficient conditions for the uniqueness of the optimal operating policy. We also develop algorithms for solving these models and provide illustrative numerical examples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.391-399
• /
• 2017

This paper presents the effects of the cutting speed and feed rate on the axial shape of flat end-milled down cut side walls. Experiments were performed using the cutting speed, tool diameter, and feed per tooth as variables, and the thrust force and axial shape were measured as the experimental results. The results of this study confirmed that a smaller feed per tooth, which is proportional to the value obtained by dividing the feed rate by the cutting speed, results in a higher axial shape accuracy. In addition, the axial shape can be simplified to a form in which two straight lines having different slopes meet at a singular point. Therefore, it was concluded that the shape accuracy could easily be estimated during the operation and improved by adjusting the feed per tooth.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.7
• /
• pp.4141-4149
• /
• 2013

Background: Mammography is considered the gold standard of breast cancer mass screening and many countries have implemented this as an established breast cancer screening strategy. However, although the incidence of breast cancer and racial characteristics are different between Western and Asian countries, many Asian countries adopted mammography for mass screening. Therefore, the objective of this research was to determine whether mammography mass screening is cost-effective for both Western and Asian countries. Materials and Methods: A systematic review was performed of 17 national mammography cost-effectiveness data sets. Per capita gross domestic product (GDP), breast cancer incidence rate, and the most optimal cost-effectiveness results [cost per life year saved (LYS)] of a mammography screening strategy for each data set were extracted. The CE/per capita GDP ratio is used to compare the cost-effectiveness of mammography by countries. Non-parametric regression was used to find a cut-off point which indicated the breast cancer incidence rate boundary line determining whether mammography screening is cost-effective or not. Results: We found that the cost-effective cut-off point of breast cancer incidence rate was 45.04; it exactly divided countries into Western and Asian countries (p<0.0014). Conclusions: Mammography screening is cost-effective in most of Western countries, but not in Asian countries. The reason for this result may be the issues of incidence rate or racial characteristics, such as dense breast tissue. The results indicate that mammography screening should be adopted prudently in Asian countries and other countries with low incidence rates.

• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.139-148
• /
• 2019

This study was performed for the application of a high-speed centrifugal cyclone to shale gas mining process. This device uses the centrifugal force to control particles similar to typical cyclones, and the disk located inside the cyclone is forced to rotate using a motor. The pressure difference occurred during the rotating of disk. Hence, inflow rate was generated without a blower fan. In addition, flow rate increased with elevating rpm of motor. The installing the disk in multiple stages on the inner rotor increased the instantaneous disk outlet flow. Hence, the control efficiency of oil particle increased from 1.05% to 31.2%. By modifying the structure of the disk so that the air flow to the opposite direction of the cyclone, the control efficiency of oil particles increased to 81.5%. By increasing the capacity of the motor and the size of the disk, the flow rate was increased to 2.5 ㎥/min because the rpm of motor and pressure difference increased. As rpm of motor increased, the cut-off diameter (d_pc) became smaller. Unlike the Lapple's equation, d_pc was inversely proportional to the effective number of rotations (N_e). The control efficiency was maintained even if the concentration of oil particles increased, for this reason, the higher the oil concentration, the more particles were accumulated and controlled.

• Korea Trade Review
• /
• v.43 no.6
• /
• pp.215-238
• /
• 2018

Tariff reduction from FTAs are applied to imported goods, but not to traveler's goods. There are difficulties in meeting the FTA's conditions for free tariff application, such as origin of goods and direct transportation. This study suggests the optimal cut-off level of a simple tax rate applied to traveler's goods with respect to traveler' welfare and government tax revenue. Among three different scenarios of simple tax reductions by ordering its weighted magnitude of effects, the optimal tariff was found to be 2% applied to all goods. The effects of a 2% reduction of simple tax rate would increase traveler' welfare by 16.8 billion won and reduce tax revenue by only 0.34 billion won.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.114-117
• /
• 2007

In the present study, the effects of initial texture on the twinning formation of AZ31 Mg rolled sheet was investigated. Uniaxial compression tests were performed on samples cut along the normal direction and rolling direction of rolled AZ31 Mg alloy sheet at various temperatures (RT, 200, 250, 300, 350, $400^{\circ}C$) with the 0.01/s strain rate. Pole figure of rolling planes showed that basal planes of most gain were located parallel to the rolling direction. After compression test, microstructures and stress-strain curves results indicated that active deformation twining occurred only at the specimen cut along the rolling direction. The slip-twin transition with the increase of temperature was also investigated.