• 한국수자원학회논문집
• /
• 제45권4호
• /
• pp.349-360
• /
• 2012

본 연구에서는 3차원 점성 흐름에 적용될 수 있는 비정수압 자유수면 모형을 수평방향 직교 곡선좌표계에서 개발하였다. 개발된 수치모형은 엇갈린 격자를 사용함으로써 발생되는 자유수면에서의 경계조건 종결 문제를 수면층 방정식을 도입하여 해결하였으며, 난류의 유동 해석을 위한 폐합식으로 등방성의 k-${\varepsilon}$ 난류모형을 이용하였다. 본 연구에서 운동량방정식은 이송-확산항만으로 중간단계의 유속을 예측하고, 압력 및 중력을 포함하는 생성항과 연속방정식을 결합하여 다음 시간단계의 유동장을 결정하는 계산 단계 분리법을 이용하였다. 수치모형의 적용성 평가를 위하여 폐쇄된 2차원 수조에서의 취송류, 급경사를 가지는 2차원 수로에서의 흐름, 원심력에 의한 이차류 흐름특성 분석을 위한 3차원 급변 만곡류에 대한 모의를 실시하였다. 수치모의 예측치는 수리모형 실험값과 수위, 유속, 난류특성 등에서 일치하는 양상을 보이는 것이 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.367-372
• /
• 2013

In this paper, micro dried bio-potential electrodes are demonstrated for sEMG (surface ElectroMyoGraphic) signal measurement using conductive epoxy on the textile fabric. Micro dried bio-potential electrodes on the textile fabric substrate have several advantages over the conventional wet/dry electrodes such as good feeling of wearing, possibility of extended-wearing due to the good ventilation. Also these electrodes on the textile fabric can easily apply to the curved skin surface. These electrodes are fabricated by the screen-printing process with the size of $1mm{\times}10mm$ and the resultant resistance of these electrodes have the average value of $0.4{\Omega}$. The conventional silver chloride electrode shows the average value of $0.3{\Omega}$. However, the electrode on the textile fabric are able to measure the sEMG signal without feeling of difference and this electrode shows the lower resistance of $1.03{\Omega}$ than conventional silver chloride electrode with $2.8{\Omega}$ in the condition of the very sharp curve surface (the radius of curvature is 40 mm).

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.57-65
• /
• 2006

본 연구에서는 본류와 지류가 만나는 합류구간, 만곡 및 사행구간이 있는 자연하천과 동일한수리모형을 제작하고 합류부를 중심으로 본류와 지류의 유량비 변화에 따라 모형의 합류부 횡단면에서 발생하는 수위차의 변화를 분석하였다. 합류이전의 최하류단면 수위를 기준으로 하는 합류부 각 단면의 최대수위 변화에 미치는 유량비의 영향은 합류부 하류구간보다 상류구간에서 더 크게 나타난다. 횡단면의 최소수위에 대한 최대수위의 변화는 합류부 중심에 가까울수록 증가하며 합류부 중심 직하류에서 최대를 보인다. 또한 합류구간 횡단면의 수면경사는 단면형태에 따라 영향을 받으며 본류에 대한 지류의 유량비가 감소할수록 수면경사도 감소한다. 기존에 제안된 일정한 곡률반경과 정형화된 단면에서 도출된 횡단면 수위차 산정 공식이 평창강과 동일하게 제작된 모형수로에서 실측값과 약 60%의 차이를 보인 반면 본 연구에서는 실측값과 약 10%의 차이를 보이는 수위차 산정 공식을 제안하였다.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.134-143
• /
• 1999

선박의 선미부와 선수부는 복잡한 곡을 가진 블록들의 조립으로 만들어진다. 이러한 복잡한 곡률 분포를 가진 이중 곡면을 성형하기 위해서 조선소에서는 롤러 굽힘 가공과 선상 가열을 이용하고 있다. 일차적으로는 롤러 굽힘에 의한 가공으로 실린더 형상이나 원추 형상의 곡면을 만들고 난 후, 선상 가열을 수행하여 목적 형상으로 이차 가공을 한다. 본 논문은 곡면 가공에서 선행되는 일차 가공의 정보로서 가공 방향과 가공 후 형상을 결정하는데 목적이 있다. 목적 형상의 가우스 변환(Gauss mapping)으로부터 가공 방향에 관한 정보를 결정하고 목적 형상과 롤러 굽힘 가공에 의해 변형된 판 사이의 기하학적 관계를 이용하여 롤러 굽힘 가공의 모양을 결정하는 알고리즘을 제시하였다.

• 한국공간구조학회논문집
• /
• 제16권1호
• /
• pp.53-64
• /
• 2016

Solar power is being spotlighted recently as a new energy source due to environmental problems and applications of solar power to curved structures are increasing. Solar panels installed on curved surfaces have different efficiencies depending on its position and the efficient positioning of solar panels plays a critical role in the design of solar power generation systems. In this study, the changing characteristics of solar irradiance were analyzed for hemispherical dome with a large curvature and the positioning of solar panels that can efficiently utilize solar energy was investigated. With an icosahedron-based hemispherical dome consisting of triangular elements as target model, a program for calculating solar irradiance using a normal vector of the solar module on each face was developed. Furthermore, the change of solar irradiance according to the sun's path was analyzed by time and season, and its effects on shades were also examined. From the analysis results, the effective positioning could be determined on the basis of the efficiency of the solar panels installed on the dome surfaces on solar irradiance.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.122-128
• /
• 2000

Aerodynamic optimization of an automotive air-conditioning blower is a hard task because of the highly complex flow phenomena related to three-dimensional flow separations and the unsteady nature caused by the interaction between primary and secondary air flows throughout the fan. In this paper, an aerodynamic study on a forward-curved centrifugal fan has been carried out Firstly we obtained the fan performance curves versus flow rates showing its unstable nature in the surging operation range. Secondly aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage using a 5-hole pilot probe, at different operating conditions. Surface flow pattern near the cut-off area exhibits similar flow behavior above the best efficiency operating point, although the pressure level increases substantially with the Increase of flow rate. Vorticity in the casing passage flow occurs in all (low rates, downstream from the r-Z plane $\theta$=120 deg., where the position of its core changes with the circumferential location. Although complex, the general flow behavior were common, giving insight in its main aerodynamic features.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.470-483
• /
• 1990

Turbulent jet in a crossflow, issuing from a row of holes on a convex surface of 90 .deg. bend duct, is predicted by a 3-dimensional numerical method. The Cartesian coordinate system in adopted in upstream and downstream tangents and the cylindrical polar coordinate system in curved region. The Reynolds stresses and heat fluxes are obtained from a standard k-e model in the core region and van Driest model in the vicinity of the wall. The governing equations are discretized by a finite volume method and solutions are obtained by a locally elliptic calculation procedure. Pressure and convective terms are treated by SIMPLE algorithm and hybrid scheme respectively. A vortex initially induced by the injected jet has been built up due to the interaction with the secondary flow caused by pressure gradient and centrifugal force. The vortex structure has a strong influence on the wall cooling effectiveness. Another vortex like horseshoe is formed in the vicinity of the injection hole and its strength is getting weak as it moves downward.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.21-29
• /
• 2013

For the purpose of supporting Curved Blocks, pipe welding is commonly used on Curved panel. Typically, when it comes to attaching supporting pipe on heavy incurvated surface, it makes much loss in the process of design, cutting, welding. This paper gives proper methods to collecting problems and Core conflicts surrounding Support Pipe by using of TOC (Theory Of Constraints). Therefore drawing two solutions, pipe development program and NC generating from pipe development Data for Plate Cutting machine. It describes a process of erasing loss surrounding Support Pipe with "TOC Thinking process" and development of two programs in this paper.

• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.469-483
• /
• 2019

In this paper, an improved mathematical model is presented for the bending analysis of doubly curved functionally graded material (FGM) sandwich rhombic conoids. The mathematical model includes expansion of Taylor's series up to the third degree in thickness coordinate and normal curvatures in in-plane displacement fields. The condition of zero-transverse shear strain at upper and lower surface of rhombic conoids is implemented in the present model. The newly introduced feature in the present mathematical model is the simultaneous inclusion of normal curvatures in deformation field and twist curvature in strain-displacement equations. This unique introduction permits the new 2D mathematical model to solve problems of moderately thick and deep doubly curved FGM sandwich rhombic conoids. The distinguishing feature of present shell from the other shells is that maximum transverse deflection does not occur at its center. The proposed new mathematical model is implemented in finite element code written in FORTRAN. The obtained numerical results are compared with the results available in the literature. Once validated, the current model was employed to solve numerous bending problems by varying different parameters like volume fraction indices, skew angles, boundary conditions, thickness scheme, and several geometric parameters.

• 건축역사연구
• /
• 제32권5호
• /
• pp.21-30
• /
• 2023

The study aims to analyze the geometric characteristics of the pointed arches proposed by Al-Kāshī in his book "Miftāḥ al-Ḥisāb" (Key of Arithmetic) and investigate their planning principles, architectural application, and typological characteristics. Al-Kāshī completed this significant work in 1427 and dedicated it to Ulugh Beg, a Timurid Sultan in Samarkand. In the ninth chapter, titled "Al-'Imārāt wa al-Abnīya" (Amīr's Mansion and Building), Al-Kāshī sought to measure the surface areas and volumes of barrel vaults (Azaj) and domes (Qubba). To achieve this, he proposed five kinds of pointed arches (Ṭāq) and analyzed their drawing methods and composition principles. The Īwān and Qubba structures, which are curved architectural elements, hold significant importance in Islamic architecture. However, previous research has predominantly focused on comparing the drawings in Al-Kāshī's book with historical buildings, neglecting the inherent characteristics of the drawings themselves. This study intends to contribute to a deeper understanding of Al-Kāshī's remarkable work and shed light on the geometric aspects of monumental structures in the Timurid Period.