• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.599-612
• /
• 2020

A combination of a gravity wall and an anchor beam is widely used to support the high soil deposit on rock mass. In this study, two groups of shaking table test were performed to investigate the responses of such combined retaining structure, where the rock masses were shaped with a flat surface and a curved surface, respectively. Meanwhile, the dynamic numerical analysis was carried out for a comparison or an extensive study. The results were studied and compared between the combined retaining structures with different shaped rock masses with regard to the acceleration response, the earth pressure response, and the axial anchor force. The acceleration response is not significantly influenced by the surface shape of rock mass. The earth pressure response on the combined retaining structure with a flat rock surface is more intensive than the one with a curved rock surface. The anchor force is significantly enlarged by seismic excitation with a main earthquake-induced increment at the first intensive pulse of Wenchuan motion. The value of anchor force in the combined retaining structure with a flat rock surface is generally larger than the one with a curved rock surface. Generally, the combined retaining structure with a curved rock surface presents a better seismic performance.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.106-115
• /
• 2018

The forward and afterward parts of ships and offshore structures are designed to improve the fuel consumption performance. These are made of curved plates with a large thickness. If a fabricated curved plate has some dimensional errors, a lot of additional cost is incurred in the assembly process. Thus, an accurate dimensional assessment is very important for fabrication. In this paper, we propose an assessment method for the dimensional quality management of curved plates. This can be applied to data measured using a variety of three-dimensional instruments, with boundary measurement points automatically classified and sorted to create a measurement surface. The assessment is evaluated after matching the CAD surface and the measured surface considering constrained conditions. The fabrication assessment is evaluated as a probability of how much the tolerance is satisfied.

• Advances in nano research
• /
• 제5권1호
• /
• pp.35-47
• /
• 2017

This paper deals with free vibration analysis of nanosize rings and arches with consideration of surface effects. The Gurtin-Murdach model is employed for incorporating the surface effect parameters including surface density, while the small scale effect is taken into consideration based on nonlocal elasticity theory of Eringen. An analytical Navier solution is presented to solve the governing equations of motions. Comparison between results of the present work and those available in the literature shows the accuracy of this method. It is explicitly shown that the vibration characteristics of the curved nanosize beams are significantly influenced by the surface density effects. Moreover, it is shown that by increasing the nonlocal parameter, the influence of surface density reduce to zero, and the natural frequency reaches its classical value. Numerical results are presented to serve as benchmarks for future analyses of nanosize rings and arches.

• International Journal of Railway
• /
• 제7권2호
• /
• pp.57-63
• /
• 2014

This paper presents the optimization of suspension characteristics under the condition of curved track railway vehicles. Reducing lateral acceleration on curved track is an issue for high-speed railway vehicles. In terms of curved track running environments, reducing the lateral vibration of railway vehicles is critical to safety and curving performance. The properties of lateral damping and stiffness of both primary and secondary suspension show effect on wheel-set, bogie and car-body. Analysis for reducing the lateral vibration of rail vehicles with respect to the characteristics of both primary and secondary suspension has been developed using ADAMS/Rail. Response Surface Method has been chosen for the purpose of verifying correlation effects among design parameters. Also, this paper suggests the method for designing optimal suspension of railway vehicles on curved track. The optimization result indicates decrement of lateral acceleration on wheel-set by 3% and bogie by 1% on curved track. Finally, this paper comes to the conclusion that suspension system of railway vehicle (KTX I) is properly designed when regarding lateral vibration of railway vehicle on diverse curved track condition.

• 한국정보전자통신기술학회논문지
• /
• 제10권1호
• /
• pp.95-101
• /
• 2017

자연 영상에는 일반적으로 지역성이 존재하기 때문에 인접한 픽셀 값들은 매우 유사한 값을 갖는다. 유사한 픽셀 값을 갖는 인접 픽셀들을 사용하여 실제 영상의 곡면 특성을 추정할 수 있다. 본 논문에서는 인접 픽셀 값들을 사용하여 실제 영상에 존재하는 곡면 특성을 정밀하게 추정하고, 곡면 특성을 반영하여 보간 값을 구하는 효과적인 기법을 제안하였다. 제안된 기법을 사용하여 보간 값을 구하고자 하는 부분의 곡면 특성을 추정한 후, 추정된 곡면 특성을 충실하게 반영하는 보간 값을 구하여 확대 영상을 생성하는 효과적인 영상 확대 기법은 확대 영상의 화질을 향상시킨다. 실험을 통하여 제안된 기법의 성능이 기존의 기법에 비하여 우수함을 확인하였다.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.875-880
• /
• 2016

In this study, we proposed an effective and simple way to directly generate wrinkle patterns on a curved surface. A curved surface was prepared using a 3D printer and an UV (Ultraviolet)-lighting system was utilized to weakly polymerize the UV-curable thin resin layer coated on the surface, resulting in a gradient of material properties in the layer thickness. Subsequently, a thermal curing process was conducted to generate microscale wrinkles by compressive forces that were generated during complete curing. Wrinkle shapes from 5, 15, 25 sec of UV-light exposure were compared. With increasing UV-exposure, the line-width of wrinkles became thicker due to much higher strength of skin zone. The results indicated that the proposed fabrication process could be utilized for surface modification in diverse research fields.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.635-645
• /
• 2017

The industry of character toys is increasing and new characters are constantly being developed. However, the development of 2D cover patterns for toys is time-consuming due to frequent pattern modifications made through trial and error. Studies are now underway to obtain 2D clothing patterns from 3D body data, however, little research has been done on 2D pattern of character toys. This study suggests efficient guidelines to develop 2D cover patterns with a reasonable accuracy and processing time. Two 3D models of a dog and rabbit were used to develop 2D cover patterns. Independent variables of this study are set as 3 levels of triangle area (small, medium, and large) that influence the efficacy of 3D and 2D pattern development. The determination of the appropriate triangular area was based on the area and shape change of the 2D pattern. A medium or large triangle area was shown to be suitable for a character dog with a smooth curved surface. However, the appropriate triangle area was small if the characteristics of the curved surface are complicated as in the case of rabbit. The head of a dog (a double-curved surface) and the curved forepaw of a rabbit (a triangular area) should be small when the characteristics of the curved surface (such as the hind leg of a rabbit having a large convex surface and a small surface area) are complicated. Grouping by 3D surface characteristics could be a suitable guideline for the triangle area selection.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2013

In recent years, the use of glass applied to curtain wall as a building facade material has increased in our nation. However, the non-tempered curved double glass is very easy to broke because it is difficult to guarantee the quality in process of making it into double glazing. So, it is more vulnerable to thermal breakage than tempered double glass. In this paper, surface temperature difference on curved double glazing was compared to that of heat strengthened glass and flat glass by conducting thermal breakage experiments. As a result, flat single glass was broken at temperature difference of 100~140 degrees but curved double glazing was broken at that of 40~60 degrees. Therefore, it was concluded that curved double glazing is more vulnerable than flat double glazing to thermal breakage, and it should be considered the possibility of thermal breakage when curtain wall glazing is applied as a building facade material.

• 물과 미래
• /
• 제25권3호
• /
• pp.87-96
• /
• 1992

측류취소로와 만곡부가 있는 원형수로를 1:20으로 축척한 모형수로에 대해 수리모형실험을 수행하여 만곡부에서의 유속, 수위와 유황과 같은 수리학적 특성을 살펴보고, 측류취소로가 만곡부에 미치는 영향을 살펴보고자 한다. 또한 모형수로에 대해 ADI방법으로 천수방정식을 수치해석하여 얻은 만곡부에서의 수리학적 특성을 실험에 의한 것과 비교하여 사용된 수치기법을 검증하였다. 대상이 된 전영역에 대하여 수리모형실험에서 얻어진 유속, 수위와 유황은 수치해석한 결과와 잘 일치한다. 그러나 직각좌표계를 사용함으로서 상대적으로 만곡부에서 단면축소 효과가 발생하므로 수치해석으로 얻어진 유속은 만곡부에서 실험치보다 약간 크게 나타나는데, 이것은 격자간격을 줄이면 개선되리라 판단된다. 수리모형실험과 수치해석 모두 만곡부 외측의 수위가 상승하고 내측의 유속이 빨라지는 만곡부의 특성을 잘 모사하고 있다. 만곡부 직전에 측류취수로가 있을 경우 측류취수로의 영향이 만곡수로내까지 미침을 알 수 있었다.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.69-80
• /
• 2000

Generally, die polishing is a lime consuming process, resulting in 30∼50％ of the whole die manufacturing time. However, die polishing has not been automated yet, since it needs a great deal of experience and skill. This paper describes a new development of automated system for die polishing and focuses on the successful achievements of the element techniques to realize from hand skill to automation, as followings: (1) The 5 axes polishing system by the aid of robot with 2 degrees of freedom, is developed for the application of curved surface die. (2) The CAM system realizes a 5 axes tool path control for polishing and measuring. (3) The conductive elastic tool is able to meet curved surfaces of die and gives a high efficient and quality polishing characteristics. (4) The surface roughness measurement device with noncontact laser is developed and has a high reliability without surface damage.