• Tribology and Lubricants
• /
• v.23 no.4
• /
• pp.149-155
• /
• 2007

The CAD model of a elliptical gear for wire cutting has been developed. The rolling contact of pitch ellipses whose rotation axes coincide with their focus has been analyzed, and the perimeter of the pitch ellipse has been divided into equal-length segments by the number of teeth. A master tooth profile, which is a composite curve of circular arcs that represents involute, has been introduced. The elliptical gear has been designed by imposing the master tooth on the divided points of the pitch ellipse, and a full fillet has been achieved between neighbour teeth. Thus, the whole profile of an elliptical gear is a composite curve of arcs only, and consequently NC codes for wire cutting can be easily generated. Furthermore, a computer simulation program is developed to verify the mesh of the elliptical gear.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.101-110
• /
• 2004

The local surface strength variation of coated papers were measured at various speeds on a number of coated paper samples to study the effects of speed and ink tack on coating pick. Coating pick phenomenon is observed in an ink transfer variation curve as a decrease in the slope of the curve. On the other hand, it causes an actual decrease in net ink transfer to paper with an increase in speed. The effect of speed on coating pick depends on ink tack, ink film thickness and surface properties of coating layer formation of paper. A novel device to measure the surface strength can rate the coating paper in a different order. Comparison are made between dry test of coating paper pick and wet coating pick test of printing in IGT printability tester. Coating formulation is the main key to prevent from coating pick. The binder level increases, the coating pick and the slop decrease. The piling on blanket in printing is a problem when the coating pick is occur on a local area rather than average surface strength of coated papers.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.63-68
• /
• 2008

The fatigue characteristics of bevel gear used for differential gear of automobile was investigated in this paper. From the A-N(Almen intensity-Number of fracture)curve of bevel gear it was shown that there was a specific time that have a maximum fatigue life. Optimal peening condition was 65m/s of project velocity and 8min of project time. Fatigue life was also investigated from the S-N curve between optimal peened specimen and unpeened specimen. Another very significant point is that the crack initiation of bevel gear by shot peening was generated in the subsurface from fractography. This paper shows that shot peening process tremendously improve fatigue characteristics of bevel gear.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.10 no.1
• /
• pp.65-78
• /
• 1985

In this paper, the approach getting a total demand by forecasting the new demand and the replacement demand separately and adding them is used for long term forecasting of durable goods. Cross country analysis using the income as an independent variable and S-shaped growth curve as a fitting model is developed as a method of forecasting new demand. To get the replacement demand the methods using the number of ownership and the replacement rate and the methods using the past demand and the distribution of the product life are proposed. And the theoretical explannation for product life cycle's diversity, which is the one of the major considerations in the long term forecasting, is attempted by the combination of the new demand and the replacement demand patterns. This is applicated the long term forecasting of Korean passenger cars.

• Journal of the Korean Mathematical Society
• /
• v.40 no.6
• /
• pp.977-998
• /
• 2003

Let k be an imaginary quadratic field, η the complex upper half plane, and let $\tau$ $\in$ η $textsc{k}$, p = $e^{{\pi}i{\tau}}$. In this article, using the infinite product formulas for g2 and g3, we prove that values of certain infinite products are transcendental whenever $\tau$ are imaginary quadratic. And we derive analogous results of Berndt-Chan-Zhang ([4]). Also we find the values of (equation omitted) when we know j($\tau$). And we construct an elliptic curve E : $y^2$ = $x^3$ ＋ 3 $x^2$ ＋ {3-(j/256)}x ＋ 1 with j = j($\tau$) $\neq$ 0 and P = (equation omitted) $\in$ E.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.228-231
• /
• 2006

유출계수(Runoff Curve Number, CN)란 강수량으로부터 대상유역의 유출량과 우수 잠재능(stormwater potential) 평가에 이용하는 수문학 변수로, 미국 자연자원 보존국(Natural Resources Conservation Service; NRCS)이 제안한 방법이다. 유출계수를 평가하기 위해서는 토지피복, 토양형, 토양 습윤 조건에 대한 정보를 조합하여 분석해야 한다. 본 연구의 목적은 미국 North Carolina의 Raleigh와 Cary시를 관통하는 Walnut Creek 유역 서부지역의 토지 피복도를 제작하여, 이 유역의 유출계수를 산정하는 것이다. 이를 위해서, 첫째 위의 불투수면 레이어와 정사항공사진을 기초자료로, ArcGIS와 Feature Analyst를 이용하여 서부 Walnut Creek 유역의 토지피복도를 제작하였다. 둘째, 제작된 토지 피복도와 본 유역의 수문학적 토양 분류체계도(Hydrologic Soil Group Map)를 중첩하여 이 유역의 유출계수도를 제작하였다.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.139-142
• /
• 2005

[ $ZrO_2$ ] gate dielectric thin films were deposited by radio frequency (rf)-magnetron sputtering and its structure, surface morphology and electrical peoperties were studied. As the oxygen flow rate increases, the surface becomes smoother. The experimental results indicate that a high temperature annealing is desirable since it improves the electrical properties of the $ZrO_2$ gate dielectric thin films by decreasing the number of interfacial traps at the $ZrO_2/Si$ interface. The carrier transport mechanism is dominated by the thermionic emission.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.368-368
• /
• 2010

Using TFTs crystallized by MICC and ELA, electron mobility and threshold voltage were measured according to various substrate temperature from $-40^{\circ}C$ to $100^{\circ}C$. Basic curve, $V_G-I_D$, is also measured under various stress time from 1s to 10000s. Consequently, due to the passivation effect and number of grains, mobility of MICC is varied in the range of -8% ~ 7.6%, while that of ELA is varied from -11.04% ~ 13.25%. Also, since $V_G-I_D$ curve is dominantly affected by grain size, active layer interface, the graph remained steady under the various gate bias stress time from 1s to 10000s. This proves the point that MICC can be alternative technic to ELA.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.795-798
• /
• 1997

This study is about the dynamic behavior of steel(SM45C). Dynamic tests were performed using SHPB(Split Hopkinson Pressure Bar) which is designed and modified to be used in both tensile and compressive modes. Quasi-static compression tests were also carried out for the comparison to the dynamic results. Not only the dynamic mechanical properties but also the effect of the notch of the specimen on stress-strain curve were investigated. The dynamic test results reveal that strain and stress are sensitively affected by the notch. The depth and the number of notch increase the stress and decrease the strain.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.41-53
• /
• 1995

Forging of spur gears has been investigated by means of upper-bound method. The term forging means forging of spur gears with solid cylindrical billets, hollow billets with flat punch. Kinematically admissbile velocity field for forging of spur gears has been proposed in this study. The 1/2 pitch of spur gear has been divided into seven dieformation regions, wherein, an involute curve has been introduced to represent the shape of die profile. Especially neutral surface has been introduced intor forging of hollow gears from hollow billets. By using the kinematically admissible velocity field, the powder requirements and suitable conditions for forging fo spur gears were successfully calculated with numerical method. According to the analysis , the acceptable number of teeth for forging of spur gears is from 15 to 20.