• 제목/요약/키워드: Current-Mode Circuit

검색결과 642건 처리시간 0.024초

새로운 DCM-ZVS DC-DC 컨버터에 관한 연구 (A Study on New DCM-ZVS DC-DC Converter)

  • 곽동걸;심재선
    • 전기전자학회논문지
    • /
    • 제16권2호
    • /
    • pp.131-137
    • /
    • 2012
  • 본 논문에서는 영전압 스위칭(ZVS)과 전류불연속 모드(DCM)에 의한 새로운 고효율의 DC-DC 컨버터에 대해 연구된다. 일반적으로 고효율의 컨버터를 만들기 위해서는 전력변환기내에 사용된 반도체 스위칭 소자의 손실을 최소화하여 이루어진다. 제안한 컨버터는 DCM에 의하여 스위치의 턴-온 동작을 영전류 스위칭(ZCS)으로 만들고, 또한 새로운 유사공진 회로를 접목하여 컨버터의 고효율을 실현시킨다. 제안한 컨버터에 사용된 제어용 스위칭 소자들은 유사공진 기법에 의해 소프트 스위칭, 즉 ZVS와 ZCS으로 동작시키고, 이에 따른 제어용 스위칭 소자들은 전압과 전류의 스트레스 없이 동작한다. 그 결과 제안한 컨버터는 스위칭 손실의 저감에 의해 고효율로 구동된다. 제안한 DCM-ZVS 컨버터의 소프트 스위칭 동작과 시스템 효율은 디지털 시뮬레이션과 실험결과를 통해 그 타당성이 입증된다.

Fuzzy Technique based Chopper Control for Slip Energy Recovery System with Twelve-Pulse Converter

  • Tunyasrirut, S.;Ngamwiwit, J.;Furuya, T.;Yamamoto, Y.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.509-514
    • /
    • 2004
  • This paper introduces the modified slip energy recovery system in order to improve its power factor and to reduce harmonics of line current waveforms. Twelve pulse line commutated converter with the chopper type IGBT is applied where the chopper is applied across the DC terminal and the chopped DC is fed to the converter operating as an inverter and then passed through the wye-wye and delta-wye transformer circuit. This scheme leads to be able to adjust the speed of the motor by the duty cycle of the chopper operating in PWM mode. The fuzzy logic controller is also introduced to the modified slip energy recovery system for keeping the motor speed to be constant when the load varies. The experimental results in testing the 0.22 kW wound rotor induction motor from no-load condition to rated condition show the effectiveness of the proposed control scheme.

  • PDF

대용량에 적합한 영전류 턴-오프 특성을 가진 새로운 공진 폴 인버터 (A Novel Auxiliary Resonant Commutated Pole Inverter Topology with Zero Current Turn-off for High Power Applications)

  • 김민홍;서범석;현동석
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
    • /
    • pp.39-42
    • /
    • 1996
  • This paper proposes a novel Auxiliary Resonant Commutated Pole Inverter (ARCPI) topology. The conventional ARCPIs make the hard switching at turn-off likewise the conventional PWM inverters. Therefore, turn-off switching losses may be so serious and can be so much considerable in high power level. The proposed ARCPI can solve this problem with high frequency transformers, switches, and capacitors. All the switches in the expanded auxiliary circuit achieves the soft switching and operates only during the commutating intervals. The characteristics and the analysis for each operation mode are described in detail and the validity is verified by the simulations and the experimental results.

  • PDF

위성 SAR 모듈화 구현을 위한 전원회로 설계 및 해석 (A Power-stage Design and Analysis to Modularize the SAR of the Korea Multi-Purpose SATellite)

  • 박성우;장진백;박희성;장성수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.93-96
    • /
    • 2003
  • Korea Multi-Purpose SATellite (KOMPSAT) uses software-controlled unregulated bus system In which the main bus is directly connected to a battery and the duty-ratio for PWM switch is generated by the on-board satellite software algorithm. In this paper, we propose a new power-stage circuit that can be available for modularization of a solar array regulator(SAR) which is used in the KOMPSAT. The operations at each mode and current sharing characteristics of the power-stage are analyzed and verified by simulation and experiments on a prototype converter.

  • PDF

ELEVATOR 구동용 VECTOR 제어 인버터 (Vector Controlled Inverter for Elevator Drive)

  • 신현주;장성영;이선재;이상동
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.627-630
    • /
    • 1991
  • This study is about vector controlled inverter for high quality elevator drive that is to improve the settling accuracy of elevator car and passenger's comfort in commercial buildings. In this study, an instantaneous space vector control type inverter was used to reduce the torque ripple ant to improve the velocity follow-up. This method calculates Instantaneous actual output torque and flux of induction motor by voltage and current, then compares them with a reference values by a speed regulator. The outputs of comparators select a switching mode, for an optimal voltage vector. Also, this study used IGBT (Insulated Gate Bipolar-Transistor), a high speed switching element, to reduce sound noise level, and DSP (Digital Signal Processor) was used to improve the reliability of the control circuit by fully digitalization.

  • PDF

A Driving Scheme Using a Single Control Signal for a ZVT Voltage Driven Synchronous Buck Converter

  • Asghari, Amin;Farzanehfard, Hosein
    • Journal of Power Electronics
    • /
    • 제14권2호
    • /
    • pp.217-225
    • /
    • 2014
  • This paper deals with the optimization of the driving techniques for the ZVT synchronous buck converter proposed in [1]. Two new gate drive circuits are proposed to allow this converter to operate by only one control signal as a 12V voltage regulator module (VRM). Voltage-driven method is applied for the synchronous rectifier. In addition, the control signal drives the main and auxiliary switches by one driving circuit. Both of the circuits are supplied by the input voltage. As a result, no supply voltage is required. This approach decreases both the complexity and cost in converter hardware implementation and is suitable for practical applications. In addition, the proposed SR driving scheme can also be used for many high frequency resonant converters and some high frequency discontinuous current mode PWM circuits. The ZVT synchronous buck converter with new gate drive circuits is analyzed and the presented experimental results confirm the theoretical analysis.

위상 제어 방식 단상유도전동기의 토크 특성 (Torque characteristic of single phase induction motor for phase control mode)

  • 김철진;최철용;이달은;윤신용;백수현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.107-109
    • /
    • 2003
  • Single phase induction motor is directly used usual source, it can be a source of an appliance such as mechanical fan, refrigerator, washing machine, etc. Especially capacitor-run single phase induction motor is suitable to make more inexpensive and high efficient products because it is more high efficiency, and good to start than other single phase induction motors. Generally, voltage and current of capacitor-run single phase induction motor transfer to the part of positive phase and negative phase based on two motor theory. In this paper, we simulate the torque characteristics to capacitance variation from single phase induction motor's equivalent circuit. Through the test using the real motor, we compare and investigate the maximum torque of run state related with capacitance and the adequacy of the converted model.

  • PDF

Telecom Power용 PFC 회로의 최적설계를 위한 Topology 특성분석 및 성능비교 (Performance Comparison and Characteristic Analysis for Optimal Design of PFC Circuit for Telecom Power)

  • 김윤성;정호철;정동욱;이병국
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2011년도 전력전자학술대회
    • /
    • pp.555-556
    • /
    • 2011
  • 본 논문은 중, 고용량 통신용 정류기에 적합한 고효율 PFC Topology를 선정하여 특성 및 성능을 비교한다. 선정회로는 Conventional Average Current Mode PFC, Back-To-Back Bridgeless PFC, Semi-Bridgeless PFC, Interleaved PFC 이다. 통신용 1U 표준사이즈의 2kw PFC 정류기 제작 및 시험을 통해 각 Topology의 성능 차이점을 확인한다.

  • PDF

분산 전원장치를 위한 중첩형 컨버터의 성능 비교 (Performances Comparison of Interleaved Converter for Distributed Power System)

  • 문건우;윤석호;김용
    • 조명전기설비학회논문지
    • /
    • 제12권3호
    • /
    • pp.37-44
    • /
    • 1998
  • 본 논문에서는 분산전원 장치에 사용되는 증첩형 액티브클램프 ZVS 포워드 컨버터와 ZVS 하프 브리지(Half bbridge) 컨버터의 동작특성과 효율을 비교하였다. 또한 중첩형 액티브클램프 ZVS 포워드 컨버터의 전류모드 제어회로 설계 방법을 제시하였고, 게이트 구동회로를 간단히 하기 위해 N-P M OSFETs 로 조합된 액티브클램프 기법을 제안하여 50~100% 부하 범위에서 약 90%의 효율을 얻을 수 있었다.

  • PDF

단상 SRM의 운전 특성 개선을 위한 새로운 패시브 컨버터 (A Novel Passive Converter for Improving Drive Characteristics of a Single Phase SRM)

  • 이동희;;안진우
    • 전기학회논문지
    • /
    • 제58권8호
    • /
    • pp.1519-1525
    • /
    • 2009
  • This paper presents a novel passive converter for single phase SRM. The proposed passive converter has additional passive power circuit which is consisted by three diodes and one capacitor in the front-end of conventional asymmetric converter to supply a high negative bias during demagnetization. The high negative bias can reduce the demagnetization time and negative torque from tail current in single phase SRM. So, It can extend positive torque region by the extended turn-off position. In this paper, the structure and operating modes of a novel passive converter are introduced with mathematical model. The proposed single phase SRM using passive converter is verified by the computer simulation and experimental results.