• 한국통신학회논문지
• /
• 제18권3호
• /
• pp.397-409
• /
• 1993

본 논문은 전류 모드 COMS 다치논리회로를 이용하여 CLA 방식에 의한 8비트 2진 병렬 가산기의 설계를 제안하였고, $5{\mu}m$의 표준 반도체 기술을 이용하여 시뮬레이션하였다. m치의 다치논리회로에 의한 CLA 방식의 가산기 설계시 필요한 발생캐리 $G_K$와 전달캐리 $P_K$의 검출조건을 유도하였고, 이를 4치에 적용하였다. 또한 4치 논리회로와 2진 논리회로의 결합에 의한 연산시 필요한 엔코더, 디코더, mod-4 가산회로, G_k및 P_k 검출회로, 전류-전압 변환회로를 CMOS로 설계하였다. 또한 시뮬레이션을 통해 각 회로의 동작을 검증하였으며, 다치회로의 장점을 이용한 2진 연산에 응용을 보여주었다. 순수한 2진 및 CCD-MVL에 의한 가산기와의 비교를 통해, 제안한 가산기는 1개의 LAC 발생기를 사용하여 1 level로 구성가능하며, 표준 CMOS 기술에 의한 4차 논리회로가 실현 가능하므로 다치논리회로의 유용성을 보였다.

• 대한전자공학회논문지SD
• /
• 제45권6호
• /
• pp.28-36
• /
• 2008

본 논문에서는 UHF 대역 RFID 태그(tag) 칩을 위한 저전력 CMOS 아날로그 회로를 설계하였다. 설계된 아날로그 front-end 블록은 국제표준인 ISO/EC 18000-6C 표준규격을 따르며, 성능테스트를 위한 메모리 블록을 포함하고 있다. 모든 회로를 1V에서 동작하도록 하여 세부 회로들의 전력소모를 최소화 하였으며, 보다 적은 전류소모로 정확한 복조를 위해 전류 모드 슈미트 트리거를 이용한 ASK 복조기를 제안 하였다. 설계된 회로는 $0.18{\mu}m$ CMOS 공정을 이용하여 칩으로 제작되었으며, 측정결과 최소 $0.25V_{peak}$ 입력으로 동작 가능하였고, 1V 전원전압에서 $2.63{\mu}A$의 전류소모를 갖는다. 칩 면적은 $0.12mm^2$이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2500-2505
• /
• 2007

The vacuum interrupter (VI) is used for medium-voltage switching circuits due to its abilities and advantages as a compact and environmental friendly circuit breaker. In general, the application of a sufficiently strong axial magnetic field (AMF) permits the arc to be maintained in a diffused mode to a high-current vacuum arc. A full understanding of the vacuum arc physics is very important since it can aid to improve the performance of vacuum interrupter. In order to closely examine the vacuum arc phenomena, it is necessary to predict the magnetohydrodynamic (MHD) characteristics by the multidisciplinary numerical modeling, which is coupled with the electromagnetic and hydrodynamic fields, simultaneously. In this study, we have investigated the electromagnetic behaviors of high-current vacuum arcs for two different types of AMF contacts, which are coil-type and cup-type, using a commercial finite element analysis (FEA) package, ANSYS. The present results are compared with those of MAXWELL 3D, a reliable electromagnetic analysis software, for verification.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.390-396
• /
• 2004

최근 설비에 대한 고 역률과 저고조파의 요구가 증가하고 있어 국제적으로 고조파에 대한 규제가 강화되고 있다. 고조파를 줄이고 규제에 적합하기 위하여 역률 개선(PFC) 회로가 일반적으로 사용되어지고 있다. 이러한 역률개선 (PFC)회로의 제어방법으로 중, 대용량 스위칭 전원장치에 가장 적합한 것으로 알려진 평균 전류 제어방식이 가장 많이 사용되어지고 있다. 그러나 순시 정전이 된 후 복전 시 역률개선회로의 스위칭 소자가 빈번하게 파손이 되고있다. 본 논문에서는 이러한 문제점의 원인을 규명하고 해결 방법을 제안하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2515-2518
• /
• 2008

The vacuum interrupter (VI) is widely used in medium-voltage switching circuits due to its abilities and advantages as an environmental friendly circuit breaker. An understanding of the vacuum arc flow phenomena is very important for improving the performance of vacuum interrupter. In order to closely examine the vacuum arc phenomena, it is necessary to predict the magnetohydrodynamic (MHD) characteristics by the multidisciplinary numerical modeling, which is coupled with the electromagnetic and the thermal flow fields, simultaneously. In this study, we have investigated arc plasma constriction phenomena and an effect of AMF on the arc plasma with the high-current vacuum arcs for the cup-type AMF electrode by using a commercial finite element analysis (FEA) package, ANSYS. The simulation results applied with various AMFs and constant Joule heat generation show that strong axial magnetic field (AMF) permits the arc to be maintained in a diffused mode to a high-current vacuum arc. However, further studies are required on the two-way coupling method and radiation model for arc plasma in order to accomplish the advanced analysis method.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.61-65
• /
• 2017

In this paper a prototype of high frequency heating power supply system based on the high frequency heating principle is designed to take the place of acupuncture, moxibustion, warm dressing treatment and some other traditional physical therapy methods. Which possess the advantages of low cost, convenient, easy operation and good effect. The high frequency heating power supply can generate a pulse voltage of more than 1KV with 300KHz switching frequency to heat the patient's skin. The skin temperature can reach to $41{\sim}42^{\circ}C$. The peak current control method is used to maintain the skin temperature in the designed range. The design of the main circuit is based on the flyback converter topology. An easier and practical design method is proposed in this paper. The power supply system prototype is verified to be stable and reliable by both the simulation and experimental results.

• 센서학회지
• /
• 제31권4호
• /
• pp.271-277
• /
• 2022

We analyzed the effects of the interface trap on the output characteristics of an inversion mode n-channel GaN Schottky barrier (SB)-MOSFET based on the N_it distribution using TCAD simulation. As interface trap number density (N_it) increased, the threshold voltage increased while the drain current density decreased. Under N_it=5.0×10¹⁰ cm^-2 condition, the threshold voltage was 3.2 V for V_DS=1 V, and the drain current density reduced to 2.4 mA/mm relative to the non-trap condition. Regardless of the N_it distribution type, there was an increase in the subthreshold swing (SS) following an increase in N_it. Under U-shaped N_it distribution, it was confirmed that the SS varied depending on the gate voltage. The interface fixed charge (Q_f) caused an shift in the threshold voltage and increased the off-state current collectively with the surface trap. In summary, GaN SB-MOSFET can be a building block for high power UV optoelectronic circuit provided the surface state is significantly reduced.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.129-135
• /
• 2015

This paper shows significant methods that improve the lifespan of LED modules as well as efficiently using an aluminum heat-sink for LED module in high power. It proposes a method that raises stability and lifespan to protect LED modules and the power unit when the LED module has been used for a long hours at high temperatures. During the research, we applied a method of pulse-width modulation (PWM) in order to prevent the phenomenon that the entire power of a system is turned off and the lifespan is reduced when the LED nodule reacts to the high temperatures. To protect the LED module and SMPS based on high efficiency, a temperature sensor is attached underneath the circuit board and the sensor measures the temperature of circuit board when the LED module is powered on. The electrical power connected to SMPS is controlled by PWM when the temperature of the LED module reaches a particular temperature.

• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.302-311
• /
• 2005

본 논문에서는 액티브 클램프 포워드컨버터 2차 측에 탭-인덕터와 스너버 커페시터, 두 개의 다이오드로 구성된 무손실 스너버를 적용한 개선된 액티브클램프 포워드컨버터를 제안하였고, 종래의 컨버터와 비교하여 제안된 컨버터가 보다 적은 자화전류조건에서도 영전압 스위칭(ZVS)이 가능함을 보였다. 제안된 컨버터의 동작원리 및 모드를 분석하였고, 300W출력용량의 컨버터 시제품을 제작 실험하여 제안된 컨버터의 효율특성이 개선됨을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.454-457
• /
• 1997

The purpose of this study is to develop an optimal model, using existing models, that is able to estimate the amount of spatter utilizing artificial neural network in the short circuit transfer mode of gas metal arc (GMA) welding. The amount of spatter generated during welding can become a barometer which represents the process stability of metal transfer in GMA welding, and it depends on some factors which constitute a periodic waveforms of welding current and arc voltage in short circuit GMA welding. So, the 12 factors, which could express the characteristics for the waveforms, and the amount of spatter are used as input and output variables of the neural network, respectively. Two neural network models to estimate the amount of spatter are proposed: A neural network model, where arc extinction is not considered, and a combined neural network model where it is considered. In order to reduce the calculation time it take to produce an output, the input vector and hidden layers for each model are optimized using the correlation coefficients between each factor and the amount of spattcr. The est~mation performance of each optimized model to the amount of spatter IS assessed and compared to the est~mation performance of the model proposed by Kang. Also, through the evaluation for the estimation performance of each optimized model, it is shown that the combined neural network model can almost perfectly predict the amount of spatter.