• 한국안전학회지
• /
• 제31권5호
• /
• pp.22-27
• /
• 2016

The Electrostatic Charge Prevention Technology is a core factor that highly influences the yield of Ultra High Resolution Flat Panel Display and high-integrated semiconductor manufacturing processes. The corona or x-ray ionizations are commonly used in order to eliminate static charges during manufacturing processes. To develop such a revolutionary x-ray ionizer that is free of x-ray radiation and has function to control the volume of ion formation simultaneously is a goal of this research and it absolutely overcomes the current risks of x-ray ionization. Under the International Commission on Radiological Protection, it must have a leakage radiation level that should be lower than a recommended level that is $1{\mu}Sv/hour$. In this research, the new generation of x-ray ionizer can easily control both the volume of ion formation and the leakage radiation level at the same time. In the research, the test constraints were set and the descriptions are as below; First, In order not to leak x-ray radiation while testing, the shielding box was fully installed around the test equipment area. Second, Implement the metallic Ring Electrode along a tube window and applied zero to ${\pm}8kV$ with respect to manage the positive and negative ions formation. Lastly, the ion duty ratio was able to be controlled in different test set-ups along with a free x-ray leakage through the metallic Ring Electrode. In the result of experiment, the maximum x-ray radiation leakage was $0.2{\mu}Sv/h$. These outcome is lower than the ICRP 103 recommended value, which is $1{\mu}Sv/h$. When applying voltage to the metallic ring electrode, the positive decay time was 2.18s at the distance of 300 mm and its slope was 0.272. In addition, the negative decay time was 2.1s at the distance of 300 mm and its slope was 0.262. At the distance of 200 mm, the positive decay time was 2.29s and its slope was 0.286. The negative decay time was 2.35s and its slope was 0.293. At the distance of 100 mm, the positive decay time was 2.71s and its slope was 0.338. The negative decay time was 3.07s and its slope was 0.383. According to these research, the observation was shown that these new concept of ionizer is able to minimize the leakage radiation level and to control the positive and negative ion duty ratio while ionization.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.16-23
• /
• 2006

본 논문에서는 고역률을 가지고 영전압 스위칭으로 동작되는 새로운 단일 전력단 고주파 공진 인버터 링크형 DC-DC 컨버터 회로에 관하여 기술하고 있다. 제안된 토폴로지는 역률 교정기로써 하프 브리지형 부스트 컨버터와 하프 브리지 고주파 공진 컨버터를 단일 전력단으로 일체화 시켰다. 역률 보상용 부스트 컨버터의 부스트 인덕터 전류를 가변 스위칭 주파수와 일정 듀티비를 가지고 불연속 전류 모드(DCM)로 동작시킴으로써 부가적인 입력 전류제어기 없이 높은 입력 역률을 얻을 수 있다. 또 제안한 토폴로지의 이론해석을 무차원화 파라미터를 도입하여 범용성 있게 하여 회로 설계 전단계에서 필요한 특성값을 도식적으로 표현하다. 첨가해, 제안한 토폴로지의 상용화 가능성과 이론해석의 정당성을 입증하기 위해 스위칭 소자로 Power-MOSFET IRF 740을 제안회로 토폴로지의 스위칭 소자로 채용해 실험 장치를 구성하여 검토를 행하였다. 제안된 컨버터는 향후 통신용 DC/DC 컨버터의 전원장치, 방전등용 진원장치 등의 전원시스템에 유용히 사용될 것으로 사료된다.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2619-2627
• /
• 2009

비접지 배전계통에서 전체고장의 약 70%를 차지하는 지락고장 발생시에는 지락전류가 작아 검출이 어렵지만 고장상태로 전원 공급을 지속할 경우 사고 파급 및 기기 소손을 유발할 가능성이 있기 때문에 지락고장 처리는 매우 중요하다. 본 논문에서는 GPT(접지형 계기용 변압기, Ground Potential Transformer)에서 감지하는 영상전압 신호를 이용하여 고장선로를 검출하고, 비상시 연계선로를 이용하여 정전구역을 복구하기 위해 평상시 개폐기가 열려 있는 상태로 배전선로 사이를 연결하는 상시개방점을 이동하며 각 구간을 차례로 분리하면서 GPT 신호의 사라짐 여부를 감시하여 고장구간을 검출하는 방법을 제안한다. 고장구간 탐색 시 전체 정전이 없고, 고장구간 검출과 건전구간 복구가 동시에 가능하며 다양한 형태의 배전계통 구성에 적용 가능하다는 점에서 효율적이다. 본 논문에서 제안하는 고장처리 방법을 프로그램으로 개발하여 베트남 배전자동화 시범사업에 적용함으로써 알고리즘 및 프로그램의 적정성을 검증하였다.

• 한국환경교육학회지:환경교육
• /
• 제24권4호
• /
• pp.111-128
• /
• 2011

This study was aimed at developing a common curriculum for the department of environmental education from 5 colleges of education. The need and background of curriculum reform can be summarized as follow; first, it has been recognized that new national curriculum of 2009 and 2011 created need for training teachers equipped with more integrated competency. Second, global environmental problems such as climate change and energy crisis asked for more responsible choice and action from all citizens. Third, the extremely low hiring rate resulted in the consideration of new working fields for teacher students majoring in environmental education. Fourth, the expansion of new environmental education paradigms including education for sustainable development called for practicing reconstruction of both contends and methods. From a series of research processes including analysis of current curriculum, DACUM, opinion survey and interest groups review, several new approaches for developing new curriculum had been identified as follow; first, content areas of environmental education should be extended beyond environmental natural science. Second, new learning approaches such as project-based learning need to be emphasized for strengthening the identity of environment as a separate subject. Third, more selective majoring system need to be applied in connection with environment government officials, researchers, and social environmental educators. It was recommended that the application of new curriculum developed by the study would be evaluated and managed by teaching conditions surrounding each of the five university members joined this developing processes. However, it needs to be noted that there is not much time because we had experienced zero hiring rate for the last 4 years and environmental policy and education programs are moving rapidly toward sustainable development.

• 전자공학회논문지D
• /
• 제35D권10호
• /
• pp.39-50
• /
• 1998

넓은 통과대역과 좁은 천이대역폭을 갖는 디지털 필터는 이동통신 장비의 CODEC이나 의료장비등에 사용된다. 이러한 주파수 특성을 갖는 디지털 필터는 다른 주파수 특성의 디지털 필터에 비해 계수 및 내부신호의 양자화 영향을 크게 받기 때문에 긴 워드 길이가 요구되며 이로 인해 칩의 면적 및 소모 전력이 증가한다. 본 논문에서는 이러한 주파수 특성을 갖는 디지털 필터의 저전력 구현을 위하여 CPL (Complementary Pass-Transistor Logic), 격자 웨이브 디지털 필터와 수정된 DIFIR (Decomposed & Interpolated FIR) 알고리듬을 이용한 설계 방법을 제시한다. CPL에서의 단락전류 성분을 줄이기 위하여 PMOS 몸체효과, PMOS latch 및 weak PMOS를 이용하는 3가지 방법에 대해 시뮬레이션을 통하여 비교한 결과 전파지연, 에너지 소모 및 잡음여유 면에서 PMOS latch를 사용하는 방법이 가장 유리하였다. 통찰력을 가지고 CPL 회로를 최적화하기 위해 CPL 기본구조에 대해 시뮬레이션 결과로부터 전파지연과 에너지 소모에 대한 경험식을 유도하여 트랜지스터의 크기를 정하는데 적용하였다. 또한 필터계수를 CSD (Canonic Signed Digit)로 변환하고 계수 양자화 프로그램을 이용하여 필터계수의 non-zero 비트수를 최소화시켜 곱셈기를 효율적으로 구현하였다. 알고리듬 측면에서 하드웨어 비용을 최소화하기 위해 수정된 DIFIR 알고리듬을 사용하였다. 시뮬레이션 결과 제안된 방법의 전력 소모가 기존 방법보다 38% 정도 감소되었다.

• 에너지공학
• /
• 제25권4호
• /
• pp.251-258
• /
• 2016

연료전지는 전기를 발전하면서 동시에 열도 생산하며, 본 고는 이 두 가지를 함께 이용하는 가정용의 마이크로 연료전지-열병합발전(${\mu}FC$-CHP) 시스템에 관한 조사보고서이다. 열병합발전 시스템을 구성하는 몇 가지 방안 중에서 연료전지는 전기와 열 효율을 합쳐 90%가 넘는 가장 높은 에너지 효율을 갖는 시스템을 구현할 수 있어 유용성이 높다. 연료전지에는 크게 다섯 가지 종류가 있으며, 이 중 가정용 ${\mu}FC$-CHP로 적합한 것은 프로톤교환 막연료전지(PEMFC)와 고체산화물연료전지(SOFC)이다. ${\mu}FC$-CHP시스템은 독립전원으로서 송배전 손실을 줄일 수 있고 전기생산단가를 낮출 수 있으며, 오염물질을 배출하지 않는 친환경 기술이란 점 등의 장점이 많다. 단점은 초기 투자비용이 높다는 점인데, 기술의 발달로 제작 단가를 줄여 이를 해결해나가고 있다. 현재는 일본이 시장을 선점하고 있으나 우리나라도 100만대 보급 계획을 가지고 있고, 정부가 반 정도의 설치보조금을 제공하여 시장을 견인하고 있다. 본 고에서는 이와 함께 연료전지와 열병합발전을 연결하는 기술적 내용 및 각국의 동향을 기술한다.

• 한국운동역학회지
• /
• 제27권2호
• /
• pp.117-124
• /
• 2017

Objective: The purpose of this study was to examine the effect of changes in degrees of freedom of the fingers (i.e., the number of the fingers involved in tasks) on the task performance during force production and releasing task. Method: Eight right-handed young men (age: $29.63{\pm}3.02yr$, height: $1.73{\pm}0.04m$, weight: $70.25{\pm}9.05kg$) participated in this study. The subjects were required to press the transducers with three combinations of fingers, including the index-middle (IM), index-middle-ring (IMR), and index-middle-ring-little (IMRL). During the trials, they were instructed to maintain a steady-state level of both normal and tangential forces within the first 5 sec. After the first 5 sec, the subjects were instructed to release the fingers on the transducers as quickly as possible at a self-selected manner within the next 5 sec, resulting in zero force at the end. Customized MATLAB codes (MathWorks Inc., Natick, MA, USA) were written for data analysis. The following variables were quantified: 1) finger force sharing pattern, 2) root mean square error (RMSE) of force to the target force in three axes at the aiming phase, 3) the time duration of the release phase (release time), and 4) the accuracy and precision indexes of the virtual firing position. Results: The RMSE was decreased with the number of fingers increased in both normal and tangential forces at the steady-state phase. The precision index was smaller (more precise) in the IMR condition than in the IM condition, while no significant difference in the accuracy index was observed between the conditions. In addition, no significant difference in release time was found between the conditions. Conclusion: The study provides evidence that the increased number of fingers resulted in better error compensation at the aiming phase and performed a more constant shooting (i.e., smaller precision index). However, the increased number of fingers did not affect the release time, which may influence the consistency of terminal performance. Thus, the number of fingers led to positive results for the current task.

• 한국재료학회지
• /
• 제30권10호
• /
• pp.509-514
• /
• 2020

The two key variables of an Si solar cell, i.e., emitter (n-type window layer) and base (p-type substrate) doping levels or concentrations, are studied using Medici, a 2-dimensional semiconductor device simulation tool. The substrate is p-type and 150 ㎛ thick, the pn junction is 2 ㎛ from the front surface, and the cell is lit on the front surface. The doping concentration ranges from 1 × 10¹⁰ cm^-3 to 1 × 10²⁰ cm^-3 for both emitter and base, resulting in a matrix of 11 by 11 or a total of 121 data points. With respect to increasing donor concentration (Nd) in the emitter, the open-circuit voltage (Voc) is little affected throughout, and the short-circuit current (Isc) is affected only at a very high levels of Nd, exceeding 1 × 10¹⁹ cm^-3, dropping abruptly by about 12%, i.e., from Isc = 6.05 × 10^-9 A·㎛^-1, at Nd = 1 × 10¹⁹ cm^-3 to Isc = 5.35 × 10^-9 A·㎛^-1 at Nd = 1 × 10²⁰ cm^-3, likely due to minority-carrier, or hole, recombination at the very high doping level. With respect to increasing acceptor concentration (Na) in the base, Isc is little affected throughout, but Voc increases steadily, i.e, from Voc = 0.29 V at Na = 1 × 10¹² cm^-3 to 0.69 V at Na = 1 × 10¹⁸ cm^-3. On average, with an order increase in Na, Voc increases by about 0.07 V, likely due to narrowing of the depletion layer and lowering of the carrier recombination at the pn junction. At the maximum output power (Pmax), a peak value of 3.25 × 10^-2 W·cm^-2 or 32.5 mW·cm^-2 is observed at the doping combination of Nd = 1 × 10¹⁹ cm^-3, a level at which Si is degenerate (being metal-like), and Na = 1 × 10¹⁷ cm^-3, and minimum values of near zero are observed at very low levels of Nd ≤ 1 × 10¹³ cm^-3. This wide variation in Pmax, even within a given kind of solar cell, indicates that selecting an optimal combination of donor and acceptor doping concentrations is likely most important in solar cell engineering.

• 유통과학연구
• /
• 제13권10호
• /
• pp.109-114
• /
• 2015

Purpose - The movie market has the characteristics of being a perfectly competitive market as well as a pure monopolistic market at the same time. This is because there are competitors in the industry but prices, although not fixed, have not changed a lot. Price competition may not have spread, but the competition is focused on artistic value, and the degree of box office success is most important. The artistic value is determined in the course of the production process. However, the degree of box office success is dependent upon the marketing manager. The marketing strategy represents the difference in the standard or quality of the movie. Inherently, the marketing manager adopts the entertainment strategy based on the quality of the foundation of the completed movie. At this time, the marketing manager knows the pertinent information (high quality/low quality) regarding the movie. This research study tries to reveal what should be the reasonable movie marketing expense, dependent on the quality of the movie. Research design, data, and methodology - Using a game scenario with different market players, the goal of the research analysis is to find out the following. First, the marketing expense is determined to maximize the profits after film production. Second, after the production costs are already committed, the manufacturer gets to choose the marketing level. At this time, there will be a profit maximization point, considering the competition. The premise of the research is as follows: if it is a good movie of quality, positive word of mouth increasing the audience continuously slows down the speed of the demand curve. If the movie quality is bad, the negative word of mouth decreasing the audience gradually hastens the speed of the demand curve. On the marketing side, when the manufacturer invests heavily in the marketing expense of the movie, consumer expectations increase to drive up the audience numbers. On the other hand, it is difficult to improve the profits excessively. When the manufacturer invests in marketing a little bit, the marketing expense is only relatively committed, therefore a lot of demand cannot be gained. Results - If a fixed market share is in a competitive situation, a low quality manufacturer expends relatively more marketing expense. If the situation assumes two manufacturers spend the same for the cost of production, the high quality manufacturer takes more profit. If the manufacturer expends less marketing budget to save costs, the optimum profit cannot be achieved since the other party (opponent) grabs the initial market share. Conclusions - In conclusion, investment is essential for market share to increase. We must refrain from a zero-sum game and have models where the game participants pursue the creative profits together. In the current film industry, there is the dominating logic of winner and loser but we have to create a film industry environment where the participants can be altogether satisfied and live together.

• Biomolecules & Therapeutics
• /
• 제6권3호
• /
• pp.289-295
• /
• 1998

The bioequivalence of two nilvadipine products was evaluated in 16 normal male volunteers (age 22-32 yr, body weight 57-80 kg) following sidle oral dose. Test product was Overca $l_{R}$ tablet (Choong-Wae Pharm. Corp., Korea) and reference product was Nivadi $l_{R}$ tablet (Hyundai Pharm. Corp., Korea). Both products contain 4 mg of nilvadipine. One tablet of the test or the reference product was administered to the volunteers, respectively, by randomized two period cross-over study (2$\times$2 Latin square method). The determination of nilvadipine was accomplished using a validated capillary column GC with electron-capture detection. As a result of the assay validation, the quantiflcation of nilvadipine in human plasma by this technique was possible down to 0.5 ng/ml using 1 ml of plasma. Absolute overall recovery from five replicate analyses of nilvadipine-spiked sample were 88.4$\pm$ 10.24% (mean$\pm$ 5.D.) for human plasma of 10 ng/ml. The coefficients of variation (C.V.) were less than 20% and the actual concentration of nilvadipine measured by GC ranged from 80 to 99% in all plasma. Average drug concentrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05); the area under the curve from time zero to 8 hr (AUCo-$_{8 hr}$) (22.8$\pm$5.90 vs 22.2$\pm$6.10 ng . hr/ml), maximum plasma concentration ( $C_{max}$) (10.0$\pm$2.85 vs 9.3$\pm$3.28 ng/ml) and time to reach maximum plasma concentration ( $T_{max}$) (1.2$\pm$0.31 vs 1.3 $\pm$0.47 hr). The differences of mean AU $Co_{8hr}$ $C_{max}$, and $T_{max}$ between the two products (2.25, 7.65, and 10.30%, respectively) were less than 20%. The power (1-$\beta$) and treaeent difference (7) for AU $Co_{8hr}$, and $C_{max}$ were more than 0.8 and less than 0.2, respectively. Although the power for Tmax was under 0.8, Tm\ulcorner of the two products was not significantly different from each other (p>0. 05). These results suggest that the bioavailability of Overeat tablet is not significantly different from that of Nivadil tablet. Therefore, two products are bioequivalent based on the current results.sults.lts.lts.lts.