• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.212-213
• /
• 2007

In case of a line-to-ground fault at transmission lines, a portion of fault current will flow into the earth through the footings of the faulted tower causing electrical potential rise nearby the faulted tower footings. In this situation, any buried pipelines or structures nearby the faulted tower can be exposed to the electrical stress by earth potential rise. Although many research works has been conducted on this phenomena, there has been no clear answer of the required separation distance between tower footings and neary buried pipeline because of its dependancy on the soil electrical charactersics of the concerned area and the faulted system. In this paper, an analytical formula to calculate the requried sepeartion distance from the faulted tower has been derived.

• 한국응급구조학회지
• /
• 제8권1호
• /
• pp.71-86
• /
• 2004

This study selected emergency medical technicians at 24 fire police boxes in Jeonnam in order to examine the relationship between job stress, fatigue and job satisfaction of 119 emergency medical technicians. Data were collected from Apr. 10 to May 9, 2004, questionnaires were mailed and returned by mail. Total 109 questionnaires were distributed and 89 questionnaires were collected and 80 except 9 omitting answers and showing inappropriate answers were used for final analysis. The results of this study are as follows. A. The total mean of areas composing job stress in the degree of job stress of 119 emergency medical technicians was over the average as 2.54 (SD .44) of 4 full marks. According to the degree of job stress by each area, the highest area of job stress was crisis situation (2.98), followed by role conflict as professional job (2.58), social factors (2.57), involvement in organization (2.55). To the contrary, the areas of the lowest job stress were professional knowledge and technique (2.35), psychological burden of medical limitation (2.38), conflicts in personal relationship and services (2.45) and improper treatment (2.53). B. The degree of fatigue of 119 emergency medical technicians by areas was over mean as 2.09(SD .49) of 4 full scores and physical fatigue was highest (2.18), followed by mental fatigue (2.11) and neurosensory fatigue (1.99). C. The degree of job satisfaction of 119 emergency medical technicians was 2.71 of 5 full scores and working condition area (3.70) showed the highest job satisfaction, followed by requirement of organization (2.85) and the lowest job satisfaction area was job itself (2.18), followed by desire for job (2.49). D. According to differences in demographical characteristics of 119 emergency medical technicians, there was no variable of statistical difference at job stress and job satisfaction in significance level .05, but fatigue showed statistical difference at final education (F=2.393, p=.046). E. According to differences related to job characteristics of 119 emergency medical technicians, job stress showed statistical differences at motif of current services (F=4.935, p=.003), fatigue showed those at health conditions (F=2.732, p=.008), job satisfaction at overtime (F=3.038, p.034) and the greatest reason of having job (F=3.217, p=.017), F. As a result of analyzing correlations between job stress. fatigue and job satisfaction of the subject, job stress showed positive correlations (r=.411, p=.000) with fatigue and negative correlation (r=-.267, p=.008) with job satisfaction. Fatigue showed negative correlation (r=-.287, p=.005) with job satisfaction. Therefore, the hypothesis of this study. "There will be relationship between degree of stress, fatigue and job satisfaction of subjects." was supported.

• 한국해안·해양공학회논문집
• /
• 제22권1호
• /
• pp.34-46
• /
• 2010

2007년 4계절 동안 5회에 걸쳐 해운대 해수욕장으로부터 약 1.6 km 떨어진 수심 20 m 해역에서 층별 관측한 조류자료를 이 기간 동안 가장 가까운 지점에서 획득한 육상풍 및 해상풍 자료와 각각 비교 검토하였다. 그 결과, 각 계절별 풍향은 육상풍과 해상풍이 서로 유사하였으나, 풍속은 해상풍이 육상풍에 비해 3배 이상 강하였다. 또한, 해상풍은 늦여름부터 가을에 걸쳐 표층 조류에 상당한 영향을 미치는 것으로 밝혀졌다. 한편, 바람이 수층의 흐름에 미치는 한계를 나타내는 에크만층의 두께는 평균 31.8 m로 나타나, 측류 위치의 전 수층이 바람의 영향을 받는 것으로 판단되었다. 따라서, 해운대 해수욕장의 모래 유실 방지 대책을 위한 조류 해석에 있어서 풍응력의 고려가 필요할 것으로 생각된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.319-319
• /
• 2023

Flows of water in the environment (e.g. in a river or estuary) generally occur in complex conditions. This complexity can hinder a general understanding of flows and their related sedimentary processes, such as erosion and deposition. To gain insight in simplified, controlled conditions, hydraulic flumes are a popular type of laboratory research equipment. Linear flumes use pumps to recirculation water. This isn't appropriate for the investigation of cohesive sediments as pumps can break fragile cohesive sediment flocs. To overcome this limitation, the rotating annular flume (RAF) was developed. While not having pumps, a side-effect is that unwanted secondary circulations can occur. To counteract this, the top and bottom lid rotate in opposite directions. Furthermore, a larger flume is considered better as it has less curvature and secondary circulation. While only a few RAFs exist, they are important for theoretical research which often underlies numerical models. Many of the first-generation of RAFs have come into disrepair. As new measurement techniques and models become available, there is still a need to research cohesive sediment erosion and deposition in facilities such as a RAF. New RAFs also can have the advantage of being automatic instead of manually operated, thus improving data quality. To further advance our understanding of cohesive sediment erosion and deposition processes, a large, automatic RAF (1.72 m radius, 0.495 m channel depth, 0.275 m channel width) has been constructed at the Hydraulic Laboratory at Chungnam National University (CNU), Korea. The RAF has the ability to simulate both unidirectional (river) and bidirectional (tide) flows with supporting instrumentation for measuring turbulence, bed shear stress, suspended sediment concentraiton, floc size, bed level, and bed density. Here we present the current status and future prospect of the CNU RAF. In the future, calibration of the rotation rate with bed shear stress and experiments with unidirectional and bidirectional flow using cohesive kaolinite are expected. Preliminary results indicate that the CNU RAF is a valuable tool for fundamental cohesive sediment transport research.

• 한국정보과학회논문지:정보통신
• /
• 제28권2호
• /
• pp.251-261
• /
• 2001

인터넷이 급속도로 발전되면서 트래픽이 폭발적으로 증가하여 현재 라우터에는 많은 부하가 걸리고 있으며 스위칭 기술은 라우팅 보다 빠르게 데이터를 전송하면서 라우터 병목 현상을 줄일수 있다. 따라서 IP 라우팅에 스위칭 기술을 접목한 레이블 스위칭 네트워크가 출현하게 되었다. 레이블 스위칭 기술 중 데이터 기반 레이블 스위칭에서는 흐름 분류와 캐쉬 테이블 관리가 중요하다. 흐름 분류는 패킷을 스위칭으로 전송할 것인지 그렇지 않으면 기존 라우팅으로 전송할 것인지를 결정하는 부분인데 이러한 흐름 분류를 위한 정보와 레이블 스위칭을 위한 정보를 저장하는 곳이 캐쉬 테이블이다. 이런 캐쉬 테이블이 크면 클수록 많은 패킷을 스위칭 할 수 있고 스위칭 설정 비용을 줄일 수 있기 때문에 캐쉬 테이블은 클수록 좋으나 라우터 자원에 의해 제약을 받으므로 적절한 캐쉬 테이블 관리가 필요하다. 따라서 효율적인 캐쉬 테이블 관리를 위해 인터넷 트래픽 특성을 고려한 캐쉬 대체 기법에 관한 연구가 요구되어 진다. 본 논문에서는 레이블 스위칭을 위한 여러 캐쉬 대체 기법들을 소개하고 제안한다. 첫째로 스위칭 용량에 한계가 없을 경우 FIFO, LFC, LRU,기법을 평가하고 우선순위 LRU 가중치 우선순위 LRU 기법을 제안한다. 둘째로 스위칭 용량에 한계가 있을 경우 LFC-LFC, LFC-LRU, LRU-LFC, LRU-LRU 기법이 한계가있을 경우 LRU-가중치 LRU 기법이 가장 나은 성능을 보였다

• Structural Engineering and Mechanics
• /
• 제1권1호
• /
• pp.75-86
• /
• 1993

The punching shear strength of concrete flat plates is one of the topics of intensive research in recent years by various concrete structures researchers. This paper reviews four current methods of analysing the punching shear strength at the corner-and edge-column positions of reinforced concrete flat plates. They include those recommended in the Australian Standard AS3600-1988, the American Concrete Institute ACI318-89 and the British Standard on Concrete Practices (BS8110) as well as the approach developed at the University of Wollongong, Australia. Based on half-scale model test results, a comparative study of these four analysis methods is made with regard to their limitation, accuracy and reliability. It is found that the Wollongong approach in general gives the best performance in predicting the punching shear strength of flat plates with torsion strips and those with spandrel beams. The Australian Standard procedure performs just as satisfactorily for flat plates with torsion strips but tends to be unsafe for those with spandrel beams. Both the ACI and the British methods are applicable only to flat plates with torsion strips; they also tend to give unsafe predictions for the punching shear strength.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.90-92
• /
• 2002

This paper presents an improved C-Dump converter system for switched reluctance motors(SRM). The proposed C-Dump converter derived from the conventional converter for SRM. The proposed converter could overcome the limitation of the conventional C-Dump converter, and could reduce the whole cost of the SRM system since the voltage stress of the dump switch $T_d$ is reduced to $V_{dc}$ when compared with $2V_{dc}$ for the conventional C-Dump converter. The attractive features of the proposed converters are; high-efficient and low-cost, elimination of dump inductor, simple control strategy, smaller size arid light weight. The proposed converter is able to be fast magnetization by $2V_{dc}$, which is sum of the input voltage and charging voltage of the dump capacitor. Also, this topology has many advantages such as freewheeling of phase winding without complex control, reduction of current ripple, reduction of torque ripple, and reduction of switching frequency. Simulation demonstrates the good performance of the converter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.587-590
• /
• 2003

The first attention in designing a transformer for low temperature rise should be to reduce losses. Leakage inductance and temperature rise are two of the more impotent problems facing the magnetic core technology of today's high frequency transformers. Excessive leakage inductance increases the stress on the switching transistors and limits the duty-cycle, and excessive temperature rise can lead the design limitation of high frequency transformer with high current. The flat transformer technology provides a very good solution to the problems of leakage inductance and thermal management for high frequency power. The critical magnetic components and windings are optimized and packaged within a completely assembled module. The turns ratio in a flat transformer is determined as the product of the number of elements or modules times the number of primary turns. The leakage inductance increase proportionately to the number of elements, but since it is reduced as the square of the turns, the net reduction can be very significant. The flat transformer modules use cores which have no gap. This eliminates fringing fluxes and stray flux outside of the core. The secondary windings are formed of flat metal and are bonded to the inside surface of the core. The secondary winding thus surrounds the primary winding, so nearly all of the flux is captured.

• Ocean and Polar Research
• /
• 제32권2호
• /
• pp.137-144
• /
• 2010

There is a host of habitat assessment systems available to evaluate and grade tidal flat ecosystems in Korea. Nevertheless, we recognize the need to develop a better ecological scheme to improve reliability and accuracy given the importance of using an empirical approach in assigning grades to indicators and the limitation of current systems which evaluate tidal flats on a regional basis. A preferable system would be one that enables habitat mapping within a tidal flat, provides a diagnosis of ecological stress/health, has a high level of ecological relevance, communicability, and statistical robustness, and enables evaluation of diverse habitats within a tidal flat. The following points should be considered in framing such a system. Indicators should discriminate habitat quality into five to seven grades accomodating diverse characteristics and conservation value of a habitat, and the grading should be made from frequency distribution of indicators based on nationwide data.We suggest the following tasks in crafting such a system: i) The decision on selection of indicators should be made based on accuracy of assessment and practical application; ii) effects of physical habitat conditions on variability of indicators should be reflected; and, iii) further works on stress/health indicators should be addressed for adopting a multiple-indicator approach which reduces misdiagnosis.

• 콘크리트학회논문집
• /
• 제27권5호
• /
• pp.521-530
• /
• 2015

최근 개발중인 초고강도 또는 강섬유보강 초고강도 콘크리트는 현행 설계기준으로 설계할 경우 그 안전성에 대해 별도의 실험 또는 해석적 증명이 필요하다. 이를 위한 철근콘크리트 부재의 상세 해석에는 응력-변형률 관계의 정의가 필요하다. 이를 위해 본 연구에서는 현행 설계기준의 제한 범위를 벗어나는 강섬유보강 초고강도 콘크리트의 압축응력하에서의 기계적 특성을 정의하였다. 80~200 MPa 의 압축강도를 보유한 분체 콘크리트 매트릭스에 강섬유를 혼입하였으며, 섬유의 보강량에 따른 압축강도의 증진률에 대해 분석하고 압축강도에 따른 탄성계수와 최대응력 발현시의 변형률에 대해 조사 분석하였다. 넓은 콘크리트 압축강도 범위내에서 사용성 확보를 위해 기존 연구결과로부터 수집된 압축강도 증진률, 탄성계수, 최대응력 발현시 변형률의 크기에 대한 결과를 활용하여 기존 추정식의 평가를 수행하였다. 또한, 강섬유가 보강되어 있지 않은 매트릭스에 대한 기존 추정식 중 정확도가 높은 식을 기반으로, 강섬유의 영향을 반영할 수 있는 새로운 추정식을 위한 계수를 도출하였다.