• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.587-601
• /
• 2015

A high step-up dc-dc converter is proposed for photovoltaic power systems in this paper. The proposed converter consists of an input current doubler, a symmetrical switched-capacitor doubler and an active-clamp circuit. The input current doubler minimizes the input current ripple. The symmetrical switched-capacitor doubler is composed of two symmetrical quasi-resonant switched-capacitor circuits, which share the leakage inductance of the transformer as a resonant inductor. The rectifier diodes (switched-capacitor circuit) are turned off at the zero current switching (ZCS) condition, so that the reverse-recovery problem of the diodes is removed. In addition, the symmetrical structure results in an output voltage ripple reduction because the voltage ripples of the charge/pump capacitors cancel each other out. Meanwhile, the voltage stress of the rectifier diodes is clamped at half of the output voltage. In addition, the active-clamp circuit clamps the voltage surges of the switches and recycles the energy of the transformer leakage inductance. Furthermore, pulse-width modulation plus phase angle shift (PPAS) is employed to control the output voltage. The operation principle of the converter is analyzed and experimental results obtained from a 400W prototype are presented to validate the performance of the proposed converter.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.528-537
• /
• 2012

This paper presents an interleaved resonant converter with a parallel-series transformer connection in order to achieve ripple current reduction at the output capacitor, zero voltage turn-on for the active switches, zero current turn-off for the rectifier diodes, less voltage stress on the rectifier diodes, and less current stress on the transformer primary windings. The primary windings of the two transformers are connected in parallel in order to share the input current and to reduce the root-mean-square (rms) current on the primary windings. The secondary windings of the two transformers are connected in series in order to ensure that the transformer primary currents are balanced. A full-wave diode rectifier is used at the output side to clamp the voltage stress of the rectifier diode at the output voltage. Two circuit modules are operated with the interleaved PWM scheme so that the input and output ripple currents are reduced. Based on the resonant behavior, all of the active switches are turned on under zero voltage switching (ZVS), and the rectifier diodes are turned off under zero current switching (ZCS) if the operating switching frequency is less than the series resonant frequency. Finally, experiments with a 1kW prototype are described to verify the effectiveness of the proposed converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.3
• /
• pp.256-262
• /
• 2013

In the large system such DC distribution for building, the method that a number of modules converters operation in parallel is commonly used. When parallel operation, circulating current is directly related to the loss of the entire system. Accordingly, each module to share the same current is the most important for the safety of the power system. In this paper, control method for reducing circulating current in parallel operation is proposed. furthermore response and operation of steady-state with parallel system was verified by simulation and experiment results.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.30-39
• /
• 2014

This paper studies a new three-level pulse-width modulation (PWM) resonant converter for high input voltage and high load current applications. In order to use high frequency power MOSFETs for high input voltage applications, a three-level DC converter with two clamped diodes and a flying capacitor is adopted in the proposed circuit. For high load current applications, the secondary sides of the proposed converter are connected in parallel to reduce the size of the magnetic core and copper windings and to decrease the current rating of the rectifier diodes. In order to share the load current and reduce the switch counts, three resonant converters with the same active switches are adopted in the proposed circuit. Two transformers with a series connection in the primary side and a parallel connection in the secondary side are adopted in each converter to balance the secondary side currents. To overcome the drawback of a wide range of switching frequencies in conventional series resonant converters, the duty cycle control is adopted in the proposed circuit to achieve zero current switching (ZCS) turn-off for the rectifier diodes and zero voltage switching (ZVS) turn-on for the active switches. Finally, experimental results are provided to verify the effectiveness of the proposed converter.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1348-1357
• /
• 2015

Under traditional unified power quality conditioner (UPQC) control, a UPQC series converter (SC) is mainly used to handle grid-side power quality problems while its parallel converter (PC) is mainly used to handle load-side power quality problems. The SC and PC are relatively independent. The SC is usually in standby mode and it only runs when the grid voltage abruptly changes. In this paper, novel UPQC coordinated control strategies are proposed which use the SC to share the reactive power compensation function of the PC especially without grid-side power quality problems. However, in some cases, there will be a circulating current between the SC and the PC, which will probably influence the compensation fashion, the compensation capacity, or the normal work of the UPQC. Through an active power circulation analysis, strategies with and without a circulating current are presented which fuses the reactive power allocation strategy of the SC and the PC, the composite control strategy of the SC and the compensation strategy of the DC storage unit. Both of the strategies effectively solve the SC long term idle problem, limit the influence of the circulating current, optimize all of the UPQC units and reduce the production cost. An analysis, along with simulation andexperimental results, is presented to verify the feasibility and effectiveness of the proposed control strategies.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.149-154
• /
• 2022

In recent years, the development of China's animation industry has gradually increased its share of gross national product. Looking at the current status of the animation industry in China, there are still many shortcomings compared to the Korean animation industry. This paper focuses on the current status of the Chinese animation industry and future development trends, and the text first discusses the current development of the Chinese animation industry, and second, verifies the problems facing the current Chinese animation industry. Finally, it is of key significance in designing policy directions so that the creative animation industry can be fostered by building the right animation industry chain and training talent in related directions in the future development direction. These three directions are believed to promote the development of the Chinese animation industry in the future.

• Bulletin of the Korea Photovoltaic Society
• /
• v.6 no.1
• /
• pp.69-75
• /
• 2020

Mongolia is located between Russia and China in Central Asia. In coal-rich corners, both the energy and energy sectors of our country prevail. Mongolia has vast resources of renewable energy and limited hydropower plants, such as wind and solar. In their first iNDC (intended Nationally Determined Contributions) submitted in 2015, Mongolia has pledged to increase the share of renewables capacity to 20% by 2020, and 30% by 2030 while reducing their energy related GHG emissions.

• International Commerce and Information Review
• /
• v.6 no.3
• /
• pp.19-40
• /
• 2004

The purpose of this paper is to analyze the present condition and business convergence of TV home shopping markets. This study is focused on the current situation and promotion plans of TV home shopping markets to make it better. This thesis shows the distribution characteristic and circumstances of korean distribution market and share of market. Using analysis data, the conclusion of thesis is that TV home shopping company will increase their business sector by appling T-commerce under the Ubiqutious era.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.59.1-59.1
• /
• 2017

The Subaru telescope is a 8.2m optical-infrared telescope operated by National Astronomical Observatory of Japan since 2000. Its wide field observation capability with good image quality makes the telescope one of the best astronomical facilities. We Subaru Telescope is seeking for international partners for the telescope operation to share science observations, future strategy and development. In the course of this effort, EAO and us exchanged a letter of intent on the planning of collaboration on the Subaru operation in this June. I introduce the contents of the Subaru-EAO LOI and the basic concepts of the Subaru international partnership in addition to a brief report of the current status of the observatory.

• Proceedings of the CALSEC Conference
• /
• 1999.11a
• /
• pp.75-84
• /
• 1999

CALS is a strategy to share integrated product data through a set of standards to achieve efficiencies in business and operational mission areas. In this research, we first studied current status for CALS standard and then analyzed the case of US DoD. The results can be summarized as implementing for two major standard in defense CALS system. They are STEP and XML. Our recommendations can be used to set direction for CALS standard implementation and standard selection process.