• 비파괴검사학회지
• /
• 제18권6호
• /
• pp.464-476
• /
• 1998

원자력 발전소 증기발생기 전열관 검사에 사용되는 와전류 탐상에 있어 결함신호로부터 결함의 형상, 크기, 위치를 정확히 결정하는 것은 매우 중요한 문제 중의 하나이다. 이에 본 연구에서는 유한요소 해석으로 얻은 학습표본으로 훈련시킨 신경회로망을 이용해 이러한 와전류 결함신호의 역문제를 풀었다. 우선 4종류의 축대칭와 전류 결함신호를 총 216개 생성하고, 각각의 결함신호에 대해 24개씩의 와전류 특징을 추출한 후, 그 중에서 결함분석에 유용한 13개의 특징을 선택하였다. 그리고 이렇게 선별된 특징을 기반으로 4가지 형상의 결함에 대한 분류작업을 확률신경 회 로망에 의해 수행하고, 그 결과로 형상이 결정된 결함에 대한 크기산정을 역전파신경 회로망을 사용하여 실시하였다.

• 복식
• /
• 제39권
• /
• pp.257-269
• /
• 1998

Comparison the literature of Korean Shroud with Current Shroud are as follows. 1. The Mo(冒) and m were not included in current shroud. Onang(五囊), Ch'im(枕), Kum(衾) and Kyo(絞) were included in current shroud. 2. Terms of the current shroud were various than the literature of korean shroud. 3. The cloths of the literature of korean shroud were Chu, Chung, P'o(布), Ch'o and Kyon, etc. But the cloths in the current shroud were Myongchu, Sambe and Kongdan. The color of the literature of korean shroud were various, but in the current shroud was light color center upon the white color. 4. The shape of the current shroud was various.

• 건축역사연구
• /
• 제24권6호
• /
• pp.57-66
• /
• 2015

As Sri Lanka Stupa had been affected by Indian stupa directly, understanding Sri Lanka Stupa is important to know about the flow of Buddhist Art History, which is showing the variation of Initial Buddhist stupa. Due to invasions and disasters, all Sri Lanka's Stupa collapsed and became random mound. After restoration works, Stupa shape changed dramatically from the Initial shape to Existing shape. Since it is hard to find out how Initial stupas were like, Sanchi Stupa needed to be an example for the comparative study as an Initial shape. Sri Lanka Stupa have Square foundation and 3 Basal rings that are supporting the Main Dome. Entrances are on all 4 sides, Railing and Torana(gate) has never found in Sri Lanka stupa. Sri Lanka stupa has been classified with the shape of Dome into 6~8 types according to "Vijayanta Potha", the Ancient Buddhist Description, and described by several researchers confusingly. With the inconvenience of using unfamiliar words and irrational gap between the Initial Sri Lanka stupa and Existing Sri Lanka stupa, proposing new classification of Sri Lanka Stupa is necessary. Existing Sri Lanka Stupa can be classified into 4 types : which is (1)Bell type, (2)Pot type, (3)Mound type, (4)Bubble type. This suggestion is for further studies to use Easier and shorter words to describe the types and make it reasonable to use, since the current classification includes 3 stupa types even there is no case for any of them. Restrict Stupa Classifications within existing Sri Lanka Stupa is needed because the current classification had been continued for hundreds of years without any adjustments. Bell type is mainly located in Anuradhapura. Pot type and Mound type is only found in limited area, and Bubble type is located in most area of Sri Lanka.

• 한국주조공학회지
• /
• 제26권5호
• /
• pp.205-210
• /
• 2006

여러 전자기 재료 프로세싱 연구 중에서 연구 되어지지 않았던 Al-Si 합금의 조직제어를 직류 자기장과 교류 전류장을 사용하여 시도 하였다. 본 연구의 목적은 Al-Si 합금에서의 새로운 거시, 미시 조직제어를 하기 위해 사용된 전자기 진동의 영향을 조사하는 것이다. 전자기 진동이 초정 알루미늄의 형상 변화를 위해 낮은 진동수 (>60Hz)로 주어질 경우, 수지상의 형상이 구상화 형상으로 변해갔다. 전자기 진동이 공정 실리콘 형상 변화를 위해 주어졌을 경우, 높은 진동수 (>500Hz)에서 조대한 판상 조직이던 실리콘이 미세한 섬유상 조직으로 변화하고, 기계적 성질도 우수해졌다.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.62-68
• /
• 2008

Effects of gravitational orientation on gas tungsten arc welding (GTAW) for 304 stainless steel were studied to determine the critical factors for weld pool formation, such as weld surface deformation and weld pool shape. This study was accomplished through an analytical study of weld pool stability as a function of primary welding parameters (arc current and arc holding time), material properties (surface tension and density), and melting efficiency (cross-sectional area). The stability of weld pool shape and weld surface deformation was confirmed experimentally by changing the welding position. The arc current and translational velocity were the major factors in determining the weld pool stability as a function of the gravitational orientation. A 200A spot GTAW showed a significant variation of the weld pool formation as the arc held longer than 3 seconds, however the weld pool shape and surface morphology for a 165A spot GTAW were 'stable', i.e., constant regardless of the gravitational orientation. The cross-sectional area of the weld (CSA) was one of the critical factors in determining the weld pool stability. The measured CSA ($13.5mm^2$) for the 200A spot GTAW showed a good agreement with the calculated CSA ($14.9mm^2$).

• 패션비즈니스
• /
• 제21권5호
• /
• pp.91-108
• /
• 2017

Interests in 3D virtual clothing technology and its application in online shopping malls are increasing with the advent of the Fourth Industrial Revolution. Most studies on 3D virtual clothing, however, are focused on observing drapes or ease of virtual clothing depending on fabric properties of representative clothing items. Therefore, the purpose of this study is: first, to determine if current input of typical material characteristics in 3D CLO are sufficient to formulate virtual skirts with different front and back silhouettes; second, to determine if subjective appearance evaluation matched physical shape characteristics of those skirts. In this study, appearances of typical cotton, wool, silk, rayon, and polyester skirts with different front and back pattern were compared between actual and virtual clothing depending on fabric materials. Subjective appearance evaluation was conducted by 7 experts regarding similarity between actual and virtual clothing with a 5-point scale. For objective evaluation of the both types of skirt shape, degree of roundness at the cross section, displacement of side seam, position of back waistline, and the number of folds at the skirt back were observed. In the case of cotton and wool, not the subjective appearance evaluation as well as shape characteristics of virtual skirts were well matched to the actual shape of skirts with a few material inputs. However, current material inputs for silk, rayon and polyester were insufficient to cover material differences in formation of virtual skirts with different front and back silhouettes.

• 복식
• /
• 제63권6호
• /
• pp.56-68
• /
• 2013

A purpose of this study is to do fundamental research of construction of coat patterns in the Daehan Empire in order to make replicas of the costumes. This study is composed of literature research, investigation of artifacts, and experiment of pattern making. The results of this study are as follows. First, even if the 15th Court Dress Rules regulated color, fabric, number of flower, width of braid, and size of button, there was no regulation regarding the shape of the coat. The analysis of the photos in those periods shows that the style of the tailcoat was different from that of today in the length of the front, the shape of breast and collar. Second, six artifacts in the collection showed that the shoulder line and the sideline were located on the further rear side than the current tailcoat. This can be confirmed in the western and Japanese pattern book, and especially the pattern drafting method in the books published in Japan in 1900s is different from current one in setting base lines of front bodice and back bodice. As a result, based on several experiments, this study proposes how to make coat patterns. The shoulder line, the sideline, and the princess line should be located in the back of the dress similar to the shape of swallowtail coats of 1900s. The front bodice should be constructed without the composition line in order to add embroidery on it. The collar, which shape looks like long half moon, should form V-shape neckline in the front breast when adjusting dress. The sleeves should be constructed top and down, and it should curve more than the modern design.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.834-839
• /
• 2012

Recently, mechanical components with miniaturized size, complex shape and fine surface are on demand from industries such as mobile electronics, medical devices and defense. The size of them is smaller than several millimeters, the shape has micro-holes, curve, or multi-step and the surface is mirror-like. This features are not able to be machined with the conventional machining, therefore electro-discharge machining (EDM), cutting, and laser machining have been applied. If the technologies are assisted by vibration, high aspect ratio and good surface are to be achieved. In this paper, prior and current researches of vibration-assisted machining are reviewed. Machining mechanisms with vibration-assisting are explained, their effects are shown, and vibrating apparatuses are discussed. Especially, comparison between with and without vibration assisting is presented. This review shows the vibration-assisted machining is effectively fabricate the components with small and complicated shape and fine surface finish.

• 복식
• /
• 제6권
• /
• pp.105-119
• /
• 1982

This thesis is mainly about the changes of Garment's collar(옷깃) and outer collar (옷섶) which indicate the identification of dress history. Through the observations of some reports about important folk materials and genuine objects, the author has investigated and rearranged them focusing on Yi-Dynasty. (1400-1900) For the shape of the outer lapels(겉깃) of Korean Jacket(저고리) were used together Squar-Tray-Collar(목판깃), Sharped-Collar(칼깃), and Dang ko-Collar(당코깃) and coming to the end of inner lapels(안깃) formed squar-tray-collar. Squar-tray-collar and sharped-collar were mainly used together for the shape of the outer lapels of Korean overcoat(포). Dang ko-collar was seen only in two overcoat. Coming to the 18th centry, the outer lapels became round-edged like those of jackets, while the inner lapels formed squar-tray-collar. In the process of positional changes of the collar and outer collar of Korean jacket and overcoat, the outer lapels positioned outside the outer collar, or a part of width of collar's positioned upon the outer collar, or the whole outer lapels positioned inside the outer collar. And through these changes the current position of the outer lapels became settled in the end of the 19th centry. But the inner lapels did not undergo many changes compared with the outer ones, and their position was mainly outside the outer collar like those of current lapels. And the garment's collar and outer collar of jacket and overcoat became small while the width and length of breast-tie(고름) became large.

• 수산해양교육연구
• /
• 제24권5호
• /
• pp.670-686
• /
• 2012

The purpose of this study is to analyze current state of education departments in Korean universities and to find out ways to help education major students shape their future career. The findings of the study are as follows. First, the comparative analysis of the current state of education and education-related departments showed that average employment rate of education departments in 2011 was 35.0%, whereas that of related departments was 56.6%, which showed a significant difference. Second, education courses were specialized in areas such as lifelong educator qualifications, teaching certificates in morality/ethics, corporate HRD(human resource development), etc. in case of education departments. In case of education-related departments, education courses were specialized in areas such as teaching certificates in pedagogy, lifelong educator qualifications, license of school counselor, corporate HRD, etc. Though there were many overlapping areas, specialization was relatively more common and diverse in education-related departments. Next, to help students shape their future career, developments in specialized career courses, new career fields, and career education models were suggested. To give shape to the progress plans, the development of standard education courses for student careers, the introduction of certification system about course specialization, and search for the career path of teaching profession which allows utilization of the knowledge of education were suggested.