• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.259-261
• /
• 1999

An operational transconductance amplifier (OTA) based precision full-wave rectifier circuit is presented in this article. The proposed circuit has a very sharp corner in the DC transfer characteristic and simple configuration comprised three OTAs and one current mirror. The temperature dependence of the OTA transconductance is reduced. Experimental results demonstrating the characteristic of the circuit are included.

• 천문학논총
• /
• 제25권4호
• /
• pp.107-112
• /
• 2010

By joining the Giant Magellan Telescope (GMT) project, Korean astronomers will get 10% of the GMT time, starting in the late 2010s. To prepare the GMT era, it is important to evaluate the current observational research activities. We surveyed the research programs performed by domestic astronomers during 2007A - 2010A period, using optical/near - IR telescopes with a medium to large aperture mirror (larger than 4 m). We describe the method and criteria of the survey, and present the results of the analysis based on the collected data.

• 문화기술의 융합
• /
• 제6권3호
• /
• pp.419-425
• /
• 2020

본 연구에서는 무반사 코팅을 하지 않은, 두 개의 거울 면을 갖는 1.55um 파장용 DFB(Distributed Feedback) 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 해석 프로그램을 개발하여 종 방향으로 발진 모드의 빔 분포를 해석하였다. 굴절률 격자와 이득 격자가 거울 면에서 갖는 위상 값의 변화에 따라서, δL<0인 경우에 대하여, DFB 레이저의 발진 모드에 대한 발진 이득, 빔 분포 |R(z)|와 |S(z)|, 그리고 방사전력비 P_l/P_r를 비교 분석하였다. 거울 면에서의 격자 위상 값에 관계없이 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.50-56
• /
• 2020

The design of a concentration system for a solar side-pumped slab laser was investigated. The side size of the slab laser medium is 2 mm × 20 mm. Based on the principle of the edge ray, a secondary concentrating system consisting of a rectangular parabolic mirror (RPM) and a rectangular dielectric-filled compound parabolic concentrator (RDCPC) was demonstrated. The focal length of RPM is 1200 mm and the size is 734 mm × 2000 mm. The outlet size of the RDCPC is 2 mm × 20 mm. The concentration effect was analyzed by using Tracepro optical software. The results showed that the concentration efficiency reached 81.3% and the uniformity of the spot was 91.4% after optimization. This design of concentration system is of great reference value for a solar side-pumped slab laser.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.313-317
• /
• 2012

We have evaluated a 1.3 ${\mu}m$ vertical-cavity surface-emitting laser (VCSEL), whose bottom mirror and central active layer were grown by metal organic chemical vapor deposition (MOCVD) and whose top mirror was covered with a dielectric coating, for 10 Gb/s data transmission over single-mode fibers (SMFs). Successful demonstration of error-free transmission of the directly modulated VCSEL signals at data rate of 10 Gb/s over a 10 km-long SMF was achieved for operating temperatures from $20^{\circ}C$ to $60^{\circ}C$ up to bit-error-rate (BER) of $10^{-12}$. The DC bias current and modulation currents are only 7 mA and 6 mA, respectively. The results indicate that the VCSEL is a good low-power consuming optical signal source for 10 GBASE Ethernet applications under controlled environments.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.420-429
• /
• 2022

In this paper, the details and design process of an optical system for space target detection cameras are introduced. The whole system is divided into three structures. The first structure is a short-focus visible light system for rough detection in a large field of view. The field of view is 2°, the effective focal length is 1,125 mm, and the F-number is 3.83. The second structure is a telephoto visible light system for precise detection in a small field of view. The field of view is 1°, the effective focal length is 2,300 mm, and the F-number is 7.67. The third structure is an infrared light detection system. The field of view is 2°, the effective focal length is 390 mm, and the F-number is 1.3. The visible long-focus narrow field of view and visible short-focus wide field of view are switched through a turning mirror. Design results show that the modulation transfer functions of the three structures of the system are close to the diffraction limit. It can further be seen that the short-focus wide-field-of-view distortion is controlled within 0.1%, the long-focus narrow-field-of-view distortion within 0.5%, and the infrared subsystem distortion within 0.2%. The imaging effect is good and the purpose of the design is achieved.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.407-412
• /
• 2022

We report on a diode-laser-pumped mode-locked Yb:KGW laser system, which delivers ultrashort pulses down to 89 fs at a repetition rate of 63 MHz, with an average power of up to 5.6 W. A fiber-coupled diode laser at 981 nm, operated with a compact driver, is used to optically pump the gain crystal via an off-axis parabolic mirror. A semiconductor saturable-absorber mirror is used to initiate the pulsed operation. Laser characteristics such as the pulse duration, spectrum bandwidth, and output power are investigated by varying the intracavity dispersions via changing the number of bounces between negative-dispersive mirrors within the cavity. Short pulses with a duration of 89 fs, a center wavelength of 1,027 nm, and 3.6 W of output power are produced at a group-velocity dispersion (GVD) of -3,300 fs². As the negative GVD increases, the pulse duration lengthens but the output power at the single-pulse condition can be enhanced, reaching 5.6 W at a GVD of -6,600 fs². Because of pulse broadening at high negative GVDs, the highest peak intensity is achievable at a moderate GVD with our system.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.32-38
• /
• 2022

Erbium-doped fiber amplifiers (EDFAs) have saturated the technological market but are still widely used in high-speed and long-distance communication systems. To overcome EDFA saturation and limitations, its erbium-doped fiber is co-doped with other materials such as zirconia and bismuth. This article demonstrates and compares the performance using three different fibers as the gain medium for zirconia-erbium-doped fibers (Zr-EDF), bismuth-erbium-doped fibers (Bi-EDF), and commercial silica-erbium-doped fibers (Si- EDF). The optical amplifier was configured with a double-pass amplification system, with a broadband mirror at the end of its configuration to allow double-pass operation in the system. The important parameters in amplifiers such as optical properties, optical amplification and noise values were also examined and discussed. All three fibers were 0.5 m long and entered with different input signals: 30 dBm for low input and 10 dBm for high input. Zr-EDF turned out to be the most relevant optical amplifier as it had the highest optical gain, longest transmission distance, highest average flatness gain with minimal jitter, and relevant noise figures suitable for the latest communication technology.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2237-2246
• /
• 2012

본 논문에서는 구강센서를 소형화하고 제조 원가를 낮추기 위해 구강센서에서 필요로 하는 바이어스 회로를 구강센서 칩 내부에서 만들어주었다. 제안된 DC-DC 변환기 회로는 기준전류 발생기(reference current generator) 회로의 IREF를 이용하여 전압 레귤레이터(voltage regulator)에 필요한 기준전류와 바이어스 전류를 각각 공급해준다. 이들 전류가 각각의 전압 레귤레이 회로에서 해당되는 기준전압을 생성하여 부궤환(negative feedback)에 의해 목표전압을 regulation하게 된다. 그리고 기준전류가 전류 복사비(current mirror ratio)에 의해 mirroring되어 정전류인 IB0/IB1을 공급해주고, VREF 전압을 공급해주도록 설계하였다. $0.18{\mu}m$ X-ray CMOS 이미지 센서 공정을 이용하여 설계된 구강센서의 DC-DC 변환기의 출력 전압의 평균 전압, ${\sigma}$와 $4{\sigma}$는 양호한 측정 결과를 얻었다. 그리고 line-pair pattern 영상은 blurring 없이 높은 해상도 특성을 보였으며, 좋은 구강 영상을 획득하였다.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.345-352
• /
• 2017

본 논문에서는 전원전압 1V에서 동작하는 산소 및 과산화수소 기반의 혈당전류를 측정할 수 있는 통합형 정전압분극장치를 설계하고 제작하였다. 정전압분극장치는 저전압 OTA, 캐스코드 전류거울 그리고 모드 선택회로로 구성되어 있다. 정전압분극장치는 산소 및 과산화수소 기반에서 혈당의 화학반응으로 발생하는 전류를 측정할 수 있다. OTA의 PMOS 차동 입력단의 바디에는 순방향전압을 인가하여 문턱전압을 낮추어 낮은 전원전압이 가능하도록 하였다. 또한 채널길이변조효과로 인한 전류의 오차를 줄이기 위해 캐스코드 전류거울이 사용되었다. 제안한 저전압 정전압분극장치는 Cadence SPECTRE를 이용하여 설계하였으며, 매그나칩 $0.18{\mu}m$ CMOS 공정을 이용하여 제작되었으며 회로의 크기는 $110{\mu}m{\times}60{\mu}m$이다. 전원전압 1.0V에서 소모전류는 최대 $46{\mu}A$이다. 페리시안화칼륨($K_3Fe(CN)_6$)을 사용하여 제작된 정전압분극장치의 성능을 확인하였다.