• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.602-609
• /
• 2008

This paper presents experimental optimization of process parameters for a newly developed SFF(Solid Freeform Fabrication) system. Two critical process parameters, layering thickness and curing period, which have a large effect on the quality of the product, are optimized through experiments. Specimens are produced using layering thicknesses of 60, 80, 100, 120, 140, and $160\;{\mu}m$ and curing periods of 0, 10, 20, and 30 minutes under the same processing conditions, i.e., build-room temperature, feed-room temperature, roller speed, laser power, scan speed, and scan spacing. The specimens are tested to compare and analyze performance indices such as thickness accuracy, flatness, stress-strain characteristics, and porosity. The experimental result indicates that layering thickness of $80{\sim}100\;{\mu}m$ and curing period of $20{\sim}30$ minutes are recommended for the developed industrial SFF system.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.487-498
• /
• 2015

A proper initial curing is a very simple and inexpensive alternative to improve concrete cover quality and accordingly extend the service life of reinforced concrete structures exposed to aggressive species. A current study investigates the effect of wet curing duration on chloride penetration in plain and blended cement concretes which subjected to tidal exposure condition in south of Iran for 5 years. The results show that wet curing extension preserves concrete against high rate of chloride penetration at early ages and decreases the difference between initial and long-term diffusion coefficients due to improvement of concrete cover quality. But, as the length of exposure period to marine environment increased the effects of initial wet curing became less pronounced. Furthermore, a relationship is developed between wet curing time and diffusion coefficient at early ages and the effect of curing length on time-to-corrosion initiation of concrete is addressed.

• Applied Microscopy
• /
• 제43권4호
• /
• pp.155-163
• /
• 2013

Meta-kaolin (MK) and blast furnace slag (BS) were used as raw materials with NaOH and sodium silicate as alkali activators for making geo-polymers. The compressive strength with respect to the various pre-curing conditions was investigated. In order to improve the recycling rate of BS while still obtaining high compressive strength of the geo-polymers, it was necessary to provide additional CaO to the MK by adding BS. The specimens containing greater amounts of BS can be applied to fields that require high initial compressive strength. Alkali activator(s) are inevitably required to make geo-polymers useful. High temperature pre-curing plays an important role in improving compressive strength in geo-polymers at the early stage of curing. On the other hand, long-term curing produced little to no positive effects and may have even worsened the compressive strength of the geo-polymers because of micro-structural defects through volume expansion by high temperature pre-curing. Therefore, a pre-curing process at a medium range temperature of $50^{\circ}C$ is recommended because a continuous increase in compressive strength during the entire curing period as well as good compressive strength at the early stages can be obtained.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.174-178
• /
• 2001

This study was performed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a result, the optimal mixing conditions were : W/B 41%, unit binder 375kgf/$\textrm{m}^3$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$\textrm{cm}^2$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.533-538
• /
• 2001

This study was peformed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a results, the optimal mixing conditions were : W/B 41%, unit binder 375kg/$cm^{2}$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$cm^{2}$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• 한국추진공학회지
• /
• 제24권4호
• /
• pp.66-72
• /
• 2020

본 논문은 알루미늄 함량 변화에 따른 추진제의 후경화에 대한 영향성, 화학적 노화도에 관하여 기술하였다. 동일 경화조건에서 알루미늄 함량이 18 wt%인 추진제가 2 wt%인 추진제 대비 후경화 기간이 길어지는 것으로 확인하였다. 반면 후경화가 포함된 화학적 노화도 분석에서는 알루미늄 함량이 18 wt%인 추진제가 2 wt%인 추진제 대비 화학적 노화가 천천히 진행되는 것을 확인하였다.

• 대한토목학회논문집
• /
• 제38권1호
• /
• pp.19-28
• /
• 2018

거푸집의 탈형 시기는 콘크리트 구조물의 품질과 공사기간, 공사비에 영향을 주는 직접적인 요인으로 콘크리트 구조물의 안전성과 경제성을 확보하는데 중요한 요소이다. 국내 규정에서 거푸집 존치에 대한 규정을 제시하고 있으나 조기에 거푸집을 해체하여 콘크리트의 품질이 저하되고 있다. 이는 양생조건에 대한 이해가 부족하고 공사기간이 단축되길 원하기 때문이다. 따라서 본 연구에서는 콘크리트의 거푸집 탈형시기에 따른 양생조건이 압축강도에 미치는 영향을 시험을 통하여 평가하였다. 연구 결과 거푸집의 12시간 후 조기 탈형은 콘크리트의 28일 압축강도를 최대 약 40% 정도까지 저하시켰으며, 거푸집을 28일 동안 장기간 존치할 경우에는 28일 표준압축강도 대비 약 7%의 강도저하를 가져왔다. 결론으로 본 논문에서는 양생온도를 등가재령으로 고려하여 거푸집 해체 시기에 따른 콘크리트의 압축강도 추정식을 제안하였다. 이 제안식은 현장에서 거푸집 제거 후의 콘크리트 압축강도 평가에 활용될 수 있다.

• 한국콘텐츠학회논문지
• /
• 제12권8호
• /
• pp.366-372
• /
• 2012

매트기초 건설공사를 포함한 대부분의 건설공사에서 구조물 가설 초기단계에서의 안전사고 방지는 매우 중요한 요소이다. 안전사고의 위험성을 감소시키기 위하여서는 콘크리트 타설 이후 안전한 거푸집 작업과 적절한 양생의 종류를 선택하는 양생방법의 선정이 무엇보다도 중요하다. 이에 따라 본 논문은 비정상상태의 수화열 해법을 통하여 매트기초 건설을 위한 적절한 양생방법 및 양생시기를 선정하는 알고리즘을 개발하였다. 이를 위하여 균열지수에 주안점을 둔 구조해석 시스템을 통한 사용자 중심의 OOP 루틴을 적용하였다. 이에 따라 콘크리트 가설 초기의 거푸집 공사에 따른 위험요소를 미연에 방지할 수 있는 안전한 양생방법 선정이 시스템적으로 가능하게 된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.25-28
• /
• 2005

This study investigates the field application of surface insulation curing method, which combined double layer bubble sheet(DBS) and thick-curing-material(TCM) for cold weather concreting. According to the test, deck slab, curing only upper section with DBS and TCM, does not make big different temperature history with that, curing both upper and bottom section during daily average temperature 6.5t. It is concluded that combination of DBS and TCM in only upper section can be safely cured in early period of time during cold water concreting. The field test was carried out with this favourable data. The upper deck slab was insulated by combination of DBS and TCM, and the construction was surrounded by tent. in order to protect from outside wind. The test result shows that the lowest temperature of deck slab indicated 6$ ^{circ}C $. It demonstrated that this curing method can resist early frost and save construction cost in the side of management and saving labor cost, compared with previous method. In addition, the column specimen, combined both form and bubble board, exhibited favorable temperature history, due to internal hydration heat insulation effect.

• 한국방재학회 논문집
• /
• 제6권1호
• /
• pp.1-7
• /
• 2006

항만공사에 사용되는 케이슨의 제작은 slip-form을 사용한 연속타설공법을 적용하고 있다. 국내 공사에서는 동절기에도 소요의 압축강도를 발현하기 위해서 양생시간의 조절과 slip-form 자체에 온도조절이 가능한 가열보온기기를 설치하여 시공하고 있다. 외기온에 따른 최적 양생온도 및 탈형시간을 추정하여 다음과 같은 결론을 도출하였다. 양생온도 $30^{\circ}C$에서 6시간의 양생시간을 거쳐 탈형되는 것이 압축강도의 발현이나 탈형의 부착 등의 문제가 없는 것으로 판단된다.