• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.242-242
• /
• 2017

A potato cultivar, Haryeong, was released for table stock in 2005 and has been supplied to farmers since 2010. Black dot has been known as a disease causing tuber blemishes in the cultivar, which is primarily an issue in storage. To investigate the effect of curing periods on disease occurrence, four periods (1, 3, 6 and 9 weeks) of curing were applied on Haryeong tubers harvested from the highlands (800 m a.s.l) in September. Tubers were stored at $2-3^{\circ}C$ and 80-90% RH for 6-7 months and were visually checked for disease occurrence. Tuber infection was characterized by barely visible small black spots on tubers and dark sooty lesions in stolon end of tubers. Another symptoms were observed on the upper surface of tubers which showed irregular, small to large, and depressed areas of brown to blackish skin with necrotic lesions inside. Results showed decrease in black dot depending on the curing period that ranges 18-48, 3-35, 0-14 and 0-3% at 1, 3, 6 and 9 weeks curing, respectively. During the storage, however, percentage weight loss of tubers and percentage of tubers with sprouts increased slightly with increasing the curing period from 1-3 to 6-9 weeks.

• 콘크리트학회지
• /
• 제8권4호
• /
• pp.141-148
• /
• 1996

기존의 촉진양생 연구는 1960~1970년대에 주로 실행된 것으로, 전체 증기양생기간이 18시간 또는 24시간인 경우에 대하여 연구되었고, 상기 연구 결과는 수동식 항온항습조를 사용하였으므로 온도상승구배의 효과에 대하여 명확한 규명을 할 수 없다고 판단되었다. 따라서 국내 PC공장 여건에서 그 직접적인 적용이 불가능한 실정이다. 본 연구는 효과적인 콘크리트 촉진양생에 대한 기본 자료를 정립할 목적으로, 국내 PC 공장에서 사용하는 배합표를 근거로 시험공시체를 제작한 후, 각 해당 양생주기 조건을 변화시켜 가면서 실험하였다. 탈형시 및 수중양생 재령28일의 측정하고 비교 검토한 결과, 재령 28일 후 설계강도값을 초과하는 가장 효과적인 촉진양생조건, 본 실험조건 하에서 전양생시간은 커다란 영향을 미치지 않았으며, 온도상승구배는 $30^{circ}C/hr$ 이하로, 최고양생온도는 $82^{\circ}C$이하로 양생해야 하며, 또한 촉진양생 후 2차 양생으로 강도증진을 도모함이 촉진양생의 효과를 증대시킬 수 있다고 판단되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.281-286
• /
• 2002

To study of binder and fine aggregate a lot of replacement fly-ash concrete, initial characteristics, standard environment of curing temperature $20^{\circ}C$, hot-weather environment of curing temperature $35^{\circ}C$, . Flesh concrete tested slump. air contest and Hardening concrete valuated setting period of form, day of age 1, 3, 5. 7, 10, 28 compression strength in sealing curing. Purpose of study is consultation materials in field that variety of fly-ash replacement concrete mix proportion comparison and valuation. (1) Experiment result age 28day compression strength more higher plan concrete then standard environment in curing temperature $20^{\circ}C$, , most strength F43 is hot-weather environment in curing temperature $35^{\circ}C$, replacement binder 25%, fine aggregate 15%. (2) Hot-weather environment replacement a mount of fly-ash is a same of plan concrete setting period of form. Age 28day compression strength replacement a mount of fly-ash more hot-weather concrete then plan concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.263-264
• /
• 2012

The purpose of present study is to examine the long-term strength improvement of hardener-free epoxy-modified mortars with steam curing. As a result, strength improvement of hardener-free epoxy-modified mortars is markedly improved with increasing of air-dry curing period. This is improved by markedly increase the degree of hardening of the hardener-free epoxy resin in the epoxy-modified mortars with additional air-dry curing period.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.42-42
• /
• 2010

In order to assure the quality of concrete structure in construction process, the odor strength measured by using odor sensor was used to evaluate curing effect. Then, the compressive strength and odor strength in ordinary concrete N were shown in water curing(=standard curing), indoor and outdoor atmospheric curing condition. The difference between odor strength in the standard curing and that in each curing condition was defined as the difference in the odor strength. And the difference in odor strength in slag powder concrete BP cured in water curing(=standard curing) for different period before exposing in outdoor atmosphere in winter season were evaluated at the age of 14 days. A necessity to prolong the moisture curing for the slag powder concrete BP compared with the ordinary concrete N to obtain a required curing effect was shown by measuring the odor strength and long term compressive strength.

• Advances in concrete construction
• /
• 제5권3호
• /
• pp.271-288
• /
• 2017

This paper aims to investigate the effects of replacing cement with ground granulated blast furnace slag (GGBFS) in self compacting concrete in the fresh and hardened state. The performance of SCC in moderate climate is well investigated but few studies are available on the effect of hot environment. In this paper, the effect of initial water-curing period and curing conditions on the performance of SCC is reported. Cement was substituted by GGBFS by weight at two different levels of substitution (15% and 25%). Concrete specimens were stored either in a standard environment (T=$20^{\circ}C$, RH=100%) or in the open air in North Africa during the summer period (T=35 to $40^{\circ}C$; R.H=50 to 60%) after an initial humid curing period of 0, 3, 7 or 28 days. Compressive strength at 28 and 90 days, capillary absorption, sorptivity, water permeability, porosity and chloride ion penetration were investigated. The results show that the viscosity and yield stress are decreased with increasing dosage of GGBFS. The importance of humid curing in hot climates in particular when GGBFS is used is also proved. The substitution of cement by GGBFS improves SCC durability at long term. The best performances were observed in concrete specimens with 25% GGBFS and for 28 days water curing.

• 한국농공학회지
• /
• 제14권4호
• /
• pp.2761-2769
• /
• 1972

The following results were obtained by the compression test of 3, 7, 14 and 28 days cured lime soil mixtures. The soil used in this test was clayey soil(sand : 20% silt : 45%, clay : 35%) and the rates of hydrated lime mixture for the dry weight of soil were 4, 8, 12, 19 and 20 percents. 1. The optimum moisture content increases and the maximum dry density decreases with the increase of the lime content. 2. The compacted moisture for the maximum strength in lime soil mixture increases with the increase of the lime content and the increase of curing periods. 3. The compressive strength increase of curing periods and its increasing ratio is largest at the 8 percent lime content. 4. The line content for the maximum strength decreases with increase of curing period and the largest strength shows at the 8 percent lime content when the curing period is over two weeks. 5. It seems to depend on the temperature effect that the compressive strength of lime soil mixtures cured in soil shows the lowest value. Accordingly, the effect of curing moisture does not influence to the strength of lime soil mixtures as much as the variation of curing temperature.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.610-616
• /
• 2011

The effect of curing temperature on basic geopolymeric reactivity and hardening behaviour of blast furnace slag were investigated using the mixture of pulverized slag and several alkaline solutions of relatively high concentration. For the pastes prepared at several different temperatures between 20$^{\circ}C$ and 90$^{\circ}C$, setting time and heat of reaction were examined while mineralogical and morphological examinations were performed for the hardened paste after curing period at same temperature. The geopolymeric reaction of slag was revealed to be accelerated strongly according to the curing temperature regardless of the sort and concentration of the alkaline solution. The increase of concentration of the alkaline solution within 9M and the existence of silicic ion in the solution also promoted the reaction severely. The mineral component and their ratio of the hardened paste were revealed to be influenced by the chemical species and silicic ion contained in alkaline solution rather than by the curing temperature. The higher temperature and longer period of curing stage were effective for the sustained formation of geopolymer and succeed improvement of density and uniformity of morphology of the final hardened body.

• 콘크리트학회논문집
• /
• 제29권2호
• /
• pp.141-148
• /
• 2017

본 연구는 PC부재의 공장생산에 있어서 여러 가지 증기양생 조건의 변수에 따른 고강도 콘크리트의 초기 압축강도 발현성상을 실험적으로 검증하고, 최적 양생조건을 확인하기 위한 것이다. 40 MPa 이상의 고강도 콘크리트 제조에는 보통 포틀랜드 시멘트를 사용하였으며, 콘크리트의 배합조건은 물-시멘트비 3종류(W/C 25%, 35% 및 45%)를 대상으로 하였다. 본 연구의 증기양생 변수로 (1) 전치양생 시간 3종류, (2) 최고 양생온도 3종류, (3) 최고온도 유지시간 3종류, (4) 승온 및 강온양생 온도 1종류 등을 대상으로 재령별 압축강도 시험을 실시하였다. 또한, 증기양생 및 표준양생에 따른 재령별 강도발현을 비교하였다. 실험결과, (1) 전치양생은 콘크리트의 초기 응결시간 이상, (2) 최고 양생온도는 $55^{\circ}C$ 이하, (3) 최고온도 유지시간은 6시간 이하로 하는 것이 증기양생 고강도 콘크리트의 강도발현에 적합한 양생조건으로 나타났다. 또한, 재령 28일에서 증기양생과 표준양생의 압축강도 발현성상의 역전현상이 발생하였다. 따라서 이러한 양생조건으로 PC부재의 생산성 및 현장관리를 위한 기초자료로 제시하고자 한다.

• 한국연초학회지
• /
• 제19권1호
• /
• pp.29-32
• /
• 1997

This study was carried out to develop a new stalk curing of the horizontal hanging method that would reduce the harvesting and curing labor, and improve its quality of cured leaf than the conventional stalk curing method in burley tobacco. The horizontal hanging stalk-curing method designed from 1988 was compared with the conventional method. The horizontal method shortened the curing Period for 7 days and reduced to 0.3%, while it occurred 9.4% in the vertical method. In the horizontal method, the quality of cured leaf improved 9%, but the contents of chemical components and physical properties were similar to those of vertical method. The labor of stalk-cut and loading in curing facility reduced 28% by the horizontal method. In harvesting and curing process, the horizontal method resulted 12% of labor saving as compared with the vertical method. Key words : horizontal hanging stalk-curing method, vertical method, stalk-curing.