• Elastomers and Composites
• /
• v.23 no.3
• /
• pp.223-229
• /
• 1988

The effect of triazine thiol derivative on the physical properties of silica-polychloroprene(CR) composites and glass fiber(MGF)-CR composites was investigated. Optimum cure time of the MGF composites filled with 2-dibuthylamino-4, 6-dithiol-s-triazine(DBT) was the fastest one, while maximum torque was the best in case of the silica composites filled with s-triazine-2,4,6-trithiol(TAT) on the Oscillating Disk Rheometer(ODR) test. Stress-strain curves of the composites showed that the physical properties such as 100% modulus, 300% modulus, tensile strength of the silica composites filled with DBT was very satisfactory and the silica composites filled with TAT was higher density of crosslinking than other crosslinked elastomer. In aging properties, elastomer filled DBT and TAT were progress post-curing reaction with increasing of aging time and it have been improved the tensile strength and crosslinking density.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.312-314
• /
• 2009

We have fabricated pentacene based organic thin film transistors (OTFTs) with formulated poly[4-vinylphenol] (PVP) gate dielectrics. The gate dielectrics is composed of PVP, poly[melamine-coformaldehyde] (PMF) and photo-initiator [1-phenyl-2-hydroxy-2-methylpropane-1-one, Darocur1173]. By adding small amount (1 %) of photo-initiator, the cross-linking temperature is lowered to $115^{\circ}C$, which is lower than general thermal curing reaction temperature of cross-linked PVP (> $180^{\circ}C$). The hysteresis and the leakage current of the OTFTs are also decreased by adding the PMF and the photoinitiator in PVP gate dielectrics.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.503-509
• /
• 2012

In this study, the potential use of indigenous natural loess(Hwangtoh) as a new construction material, via alkali activation in conjunction with microwave heating, was investigated. Hwangtoh pastes with three different mix proportions of varying alkali liquid concentrations at a constant liquid-to-Hwangtoh ratio of 0.55 were prepared. Through the investigation it was found that it is possible to prepare Hwangtoh paste with $19.02N/mm^2$ at the age of 4 hours with the alkali solution of 8M NaOH and 1:4.5 mass ratio of liquefied $Na_2SiO_3$ at the curing temperature of $60^{\circ}C$ by microwave heating. The strength development at early age of the alkali activated Hwangtoh paste specimens may be attributed to both a higher rate of reaction and moisture evaporation due to microwave heating.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.50-51
• /
• 2015

In marine and coastal environments, penetration of chloride ions is one of the main mechanisms causing concrete reinforcement corrosion. Currently, most of experimental investigations about submerged penetration of chloride ions are started after the four weeks standard curing of concrete. The further hydration of cement and reduction of chloride diffusivity during submerged penetration period are ignored. To overcome this weak point, this paper presents a numerical procedure to analyze simultaneously cement hydration reaction and chloride ion penetration process. First, using a cement hydration model, degree of hydration and phase volume fractions of hardening concrete are determined. Second, the dependences of chloride diffusivity and chloride binding capacity on age of concrete are clarified. Third, chloride profiles in hardening concrete are calculated. The proposed numerical procedure is verified by using chloride penetration test results of concrete with different mixing proportions.

• Composites Research
• /
• v.16 no.1
• /
• pp.34-41
• /
• 2003

A cure process control model was proposed to optimize the curing process of thick filament wound structure. There are two types of smart cure, one is that the boundary conditions of the hollow cylinder are same between inner surface and outer surface, and the other is that inner surface temperature is slightly higher than outer surface to initiate cure reaction from the inner side to the outer side to reduce residual stress.

• Archives of Pharmacal Research
• /
• v.19 no.1
• /
• pp.18-22
• /
• 1996

Acrylate-terminated poly (ethylene glycol) (PEG) macromer was prepared by the reaction of PEG with acryloyl chloride. Photopolymerization of PEG macromer resulted in the formation of cross-linked PEG network. Interpenetrating polymer networks (IPNs) based on PEG and poly(acrylic acid) (PAA) was obtained via template polymerization of AA to the PEG network by UV curing. The swelling degree of the IPNs hydrogel increased with an increase of pH value due to the association-dissociation between carboxylic acid of PAA and either of PEG through hydrogen bounding. The swelling-deswelling behavior proceeded reversibly for the IPNs upon changing pH. Release of indomethacin from the IPNs demonstrated "on-off" regulation with pH fluctuation.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.388-394
• /
• 2000

The C4A3S clinker was prepared by the solid-state reaction. The mixture of raw materials; calcite, kaoline and gypsum, was fired at 135$0^{\circ}C$ for 1hr and cooled rapidly in air. C4A3S type expansive was made with C4A3S clinker, CaO and CaSO4. The cement replaced by 10 wt.% C4A3S type expansive was investigated by the measurement of the strength(compressive, tensile, flexural) and length change at various curing conditions. Hydration products were mainly ettringite, monosulfate and Ca(OH)2. The densification and the expansion due to the formation of ettringite during the hydration increased strength and reduced the drying shrinkage of hardened cement.

• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.234-237
• /
• 2011

This paper presents a study into pH Indicator-Embedded hydrogel micro-particles which are encoded various shapes according to the captured indicator. We incorporate various pH indicators into a photo-curable hydrogel, PEG-DA(Poly(ethylene glycol) diacrylate). Using the latest fluidic lithography techniques, we can easily fabricate variously patterned hydrogel particles based on in-situ photopolymerization of the PEG-DA in a micro-fluidic channel. The shape of the particle is related to the pH indicator inside the particle. We demonstrate that the micro pH sensors change their colors according to the pH levels. The micro pH sensors have various characteristics that are related to the curing time, particle size, etc. By changing these conditions, we can adjust the long term stability and reaction time of the hybrid micro pH sensors.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.79-86
• /
• 1997

The microcapsule for thermochromism is based on the polymerization reaction between epoxy resin and amine curing agent. The preparation process of microcapsule is based on dissolving or dispersing a hydrophobic core materials[one-dye-black(OBD), bis-phenol A(BPA), cetyl alcohol] in an aqueous solution of gelatin, epoxy resin and isophorondiamine(IPDA) ; the gelatin and IPDA used as a dispersion stabilizer and an hardening agent, respectively. The structures of epoxy resin and microcapsule materials have been analyzed by FT-IR and UV/Vis spectra. The mean diameter and size distribution of microcapsule are 1.46~1.75${\mu}{\textrm}{m}$ and 1.42, respectively. The DSC thermograms of microcapsules indicated 2 kinds of endothermic peaks at 47 and 322$^{\circ}C$. This is possibly corresponding to the melting peak of core material and wall meterial. These microcapsules are applied to the fabric by printing. Complex finished fabric showed a good wear resistance on rubbing test and the print pattern to the cotton fabric showed a reversible thermochromism ; ${\mu}_{max}$ are 580 nm below 4$0^{\circ}C$ and 276.5nm above 4$0^{\circ}C$ in ethanol/water(2/8), respectively.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.61-64
• /
• 2000

FT-IR/ATR analysis shows that the oriental lacquer coating network degrades mostly in the unsaturated side chain. The rate of increase in carbonyl intensity (a measure of photodegradation) during the accelerated weathering test was substantially different for the unstabilized and stabilized samples; adding 2 wt% HALS into the oriental lacquer formulation enhanced photostabilization up to three times. Weight loss measurements, another indication of photodegradation, and SEM analysis support this conclusion. Despite the presence of the photo-stabilizer, the other properties of the lacquer were not significantly affected. In particular, the curing behavior of purified lacquer (PL) and HALS-stabilized samples is similar, although the in-situ DETA analysis showed that addition of HALS can slightly retard the cure reaction rate in oriental lacquer coating. It is hypothesized that this cure retardation may be related to the salt formation between HALS and acid of oriental lacquer.