• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.70-78
• /
• 2022

The trenchless entire repair technology (TERT) have many different names depending on the companies, and they have the same or similar methods as well as materials. In addition, there was quiet difficulty in application of field working and even confuse to classify for new TERT, while application criteria of TERT is not listed systematically. This study proposed standardization and method for TERT affecting by pipe condition, working materials, working method, specification/quantity per unit according to field condition, strange affairs and others. Determination criteria of defective sewer pipe has proposed to effective method which modify a criteria between Ministry of Environment and Seoul Metropolitan City. A Cured-in-place pipe (CIPP) is suitable for TERT, and the design criteria for the entire broken pipe are proposed when the pipe itself deforms more than 10%. A check lists are specimen preparing, hardening site made by clamped mold, numbers, flexural and tensile property, water leak and desquamation test, and have to use material property of minimum CIPP value depend on ISO 11296-4, ISO 11297-4, KS M3550-7 and KS M3550-9.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.164-167
• /
• 2013

The objectives of this paper are to study the performance improvement of waste heat recovery from a boiler, by the Cured-In-Place-Pipe(CIPP) process. The conventional apparatus does not utilize the waste heat from the boiler during the process. However, the present apparatus recovers the waste heat from the boiler. When the new apparatus is used, the bending strength and modulus of the CIPP becomes double, and is over 45% stronger, than the required conditions, respectively. It is found that the energy consumption reduces to 50%, by recovering the waste heat from the boiler, and the oil consumption amount reduces to 1/3, compared to the conventional apparatus.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.149-159
• /
• 2020

Cured-in-place-pipe(CIPP) is the most adopted trenchless application for sewer rehabilitation to extend the life of the existing sewer without compromising both direct construction and indirect social costs especially applied in the congested urban area. This technology is globally and domestically known to be the most suitable for partial and full deteriorated pipe structure rehabilitation in a sewer system. The typical design of CIPP requires a significant thickness of lining to support loading causing sewage flow interruption and increasing material cost. This paper presents development of a high strength glass fiber composite lining material for the CIPP application and structural test results. The test results exhibit that the new glass fiber composite lining material has 12 times of flexural strength, 6.2 times of flexural modulus, and 0.5 Creep Retention Factor. These test results can reduce lining design thickness 35% at minimum. Even though taking into consideration extra materials such as outer and inner films for actual field applications, the structural capacity of the composite material significantly increases and it reduces 20 percent or more line thickness as compared to the conventional CIPP. We expect that the newly developed CIPP lining material lowers material costs and minimizes flow capacity reduction, and fully replaceable to the conventional CIPP lining materials.

• 한국가스학회지
• /
• 제20권6호
• /
• pp.58-64
• /
• 2016

본 연구에서는 굴곡진 배관에서 내부 유체의 유동속도의 변화에 따른 진동특성을 고찰 하였다. 해밀톤의 원리에 근거하여 운동방정식을 유도하고 굽어진 배관계의 유한요소 방정식을 구성한 후, 진동수 방정식을 풀이하여 고유 진동수를 구하였다. 곡관부에 가해지는 초기 인장력을 무시하였을 경우에는 내부 유체의 유동속도가 증가함에 따라 파이프의 고유진동수의 값은 감소하였다. 초기 인장력을 고려할 경우에는 내부 유동속도의 변화에 상관없이 파이프의 고유진동수가 변하지 않았다. 배관의 자유진동 평가 시, 정확한 고유진동수를 구하기 위해서는 시스템 운동방정식을 구성할 때, 초기인장력을 반드시 고려하여야한다. 공진을 회피하기 위해서는 파이프의 강성 및 지지점의 위치를 변화시킴으로써 시스템의 기계적 성질을 조절해야 한다. 고유진동수는 가진 진동수 범위로부터 이격시켜야 한다. 엘보우의 각도는 제1차 고유진동수에 영향을 미치지 않음이 고찰되었으나, 3차 모드나 그 이상의 고주파 모드에서는 영향을 미쳤다.