• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.201-205
• /
• 2008

The korean government started to ban the sanitary landfill of food wastes as of 2005. The radical change of policy is primarily due to the limited landfill site, but aimed to promote not only to reduce the food waste production but also to enhance the reuse and recycle. The performance of elutriated acid fermentation to evaluate the effects of elutriating ratios was investigated. The fermenters were operated with elutriating water to food waste volumetric ratio of 2, 1, 0.5 and 0.25. Initial pH of elutriating water was set for 9 based on the pH effects study. The cumulative amounts of SCOD production rate were $0.34gSCOD/gVS_i$, $0.45gSCOD/gVS_i$, $0.26gSCOD/gVS_i$ and $0.28gSCOD/gVS_i$ with the ratios of 2, 1, 0.5 and 0.25, respectively. The cumulative productions of VFAs were 0.12 gVFAs as $COD/gVS_i$, 0.28 gVFAs as $COD/gVS_i$, 0.21 gVFAs as $COD/gVS_i$ and 0.14 gVFAs as $COD/gVS_i$ with the ratios of 2, 1, 0.5 and 0.25, respectively. The volume reduction were 58%, 52%, 45% and 47% with the ratios of 2, 1, 0.5 and 0.25, respectively.

• The Korean Journal of Financial Management
• /
• v.21 no.1
• /
• pp.59-86
• /
• 2004

This study analyzed the effects of M&A announcement before and after the 1998 amendments of 'Securities and Exchange Act' through the event study. The M&A firms turned out to gain the abnormal returns during the entire periods. The cumulative average abnormal returns of M&A firms was 1.38%(market adjusted model) or 5.37%(industry-adjusted model) higher after the 1998 amendments than before. The differences of performance of M&A were significant also in case of the related M&A, vertical or horizontal M&A, M&A in booms. In regression analysis, the 1998 amendments of Act was the significant factor to explain the cumulative abnormal returns.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.166-171
• /
• 1996

The purpose of this study is to compare the postoperative analgesic effect of morphine and meperidine, employing intravenous patient controlled analgesia after cesarean section. Among fifty nine parturients undergoing cesarean section with general anesthesia, 32 were administered morphine designated as 'morphine group', and 27 parturient administered meperidine as 'meperidine' group, during 48 hours after commencement of PCA. Doses administered, based on potency for this setting, were equivalent to 1 mg morphine or 10 mg meperidine. Loading dose was administered when parturient first complained of pain after cesarean section. This was followed with bolus dose, 1 mg for morphine group and 10 mg for meperidine group, with a lockout interval of 8 minutes between doses wherever parturient requested additional analgesia. Visual analog scale(VAS) pain scores during rest were significantly lower at only 1 and 2 hour for the meperidine group, than morphine group. Loading dose and cumulative dose at 1, 2 and 3 hours were significantly lower for meperidine group than the morphine group. There were no significant difference in total dose and hourly dose for 48 hours and cumulative dose at 6, 12, 24, and 48 hours between both groups. More than 90% of the parturients from both groups were satisfied with the analgesic effects of pain relief. Morphine group experienced side effects such as: pruritus, sedation and dizziness. Meperidine group had sedation, dizziness, nausea and local irritation. Neither group required any specific treatment for any of the above side effects. We conclude that meperidine had greater analgesic effect at early stage of post-operative period.

• The Korean Journal of Pain
• /
• v.12 no.1
• /
• pp.54-58
• /
• 1999

Background: We studied 150 patients who received intravenous patient controlled analgesia (PCA) after total abdominal hysterectomy to evaluate pain relief, analgesic consumption, patient's satisfaction and side effects. Methods: We made total 40 ml of analgesic mixture with morphine 40 mg, ketorolac 120 mg, droperidol 3 mg and normal saline. Loading/bolus/basal infusion dose and lockout interval was 2 ml, 1.5 ml, 0.5 ml/hr and 10 min, respectively. Numerical rating scale (NRS) pain score, cumulative analgesic consumption, degree of satisfaction, and incidence of side effects were evaluated. Also, correlation of age and edu ion with analgesic consumption were evaluated. Results: The average pain scores using NRS were $3.1{\pm}1.7$ (6 h), $2.1{\pm}1.5$ (24 h), $1.7{\pm}1.5$ (48 h). The average cumulative analgesic consumption were $11.7{\pm}5.0$ ml (6 h), $23.0{\pm}6.7$ ml (24 h), $32.1{\pm}3.7$ ml (48 h). The degree of satisfaction in postoperative pain control was good in 94% of patients. There was no correlation between degree of satisfaction and analgesic consumption. Also age and level of edu ion did not correlated with analgesic consumption. Conclusions: Intravenous PCA with morphine, ketorolac, and droperidol is an effective method of postoperative pain control because it provides adequate pain relief and a few side effects with high patient's satisfaction. However, age and level of education did not correlated with analgesic consumption.

• Steel and Composite Structures
• /
• v.20 no.2
• /
• pp.317-335
• /
• 2016

Concentrically braced steel frames (CBFs) can be optimised during the seismic design process by using lateral loading distributions derived from the concept of uniform damage distribution. However, it is not known how such structures are affected by uncertainties. This study aims to quantify and manage the effects of structural and ground-motion uncertainty on the seismic performance of optimum and conventionally designed CBFs. Extensive nonlinear dynamic analyses are performed on 5, 10 and 15-storey frames to investigate the effects of storey shear-strength and damping ratio uncertainties by using the Monte Carlo simulation method. For typical uncertainties in conventional steel frames, optimum design frames always exhibit considerably less inter-storey drift and cumulative damage compared to frames designed based on IBC-2012. However, it is noted that optimum structures are in general more sensitive to the random variation of storey shear-strength. It is shown that up to 50% variation in damping ratio does not affect the seismic performance of the optimum design frames compared to their code-based counterparts. Finally, the results indicate that the ground-motion uncertainty can be efficiently managed by optimizing CBFs based on the average of a set of synthetic earthquakes representing a design spectrum. Compared to code-based design structures, CBFs designed with the proposed average patterns exhibit up to 54% less maximum inter-storey drift and 73% less cumulative damage under design earthquakes. It is concluded that the optimisation procedure presented is reliable and should improve the seismic performance of CBFs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.207-215
• /
• 1997

This paper deals with a comparison between Taguchi's accumulation analysis method and Nair test on the ordered categorical data from an industrial experiment for quality improvement. a result of Taguchi's accumulation analysis method is shown to have reasonable power for detecting location effects, while Nair test identifies the location and dispersion effects separately, Accordingly, Taguchi's accumulation analysis needs to develop methods for detecting dispersion effects as well as location effects. In addition this paper rewmmends models for analyzing ordered categorical data, for examples, the cumulative legit model, mean response model etc Successively simple, reasonable methods should be introduced more likely to be used by the practitioners.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.865-870
• /
• 2001

An effective live load model for analyzing probable maximum live load effects in longitudinal direction such as moment and shear was developed. The main procedure of this live load model is composed of two parts. Firstly, determination of the appropriate influence lines, and secondly, application of the characteristics of vehicles and traffic patterns. Through this procedure, probabilistic distributions of maximum probable load effects are deduced in the form of probability density function (PDF) or cumulative density function (CDF). The proposed live load model is not limited by bridge types(number of spans or girders) and can consider local or global deterioration of bridges in the analysis. Besides, load effects can be determined at any section without restrictions.

• Culinary science and hospitality research
• /
• v.21 no.6
• /
• pp.38-48
• /
• 2015

This study examined the factors that affect the relationship between dessert cafe customer attribute election, relationship quality and behavioral intention. A total of 260 questionnaires were distributed to consumers, of which 250 were deemed suitable for analysis after the removal of 10 unusable responses. In order to perform statistical analyses required by the study, the SPSS 18.0 Statistical Program was employed for frequency analysis, factor analysis, reliability analysis, correlation, and regression analysis. The results of the exploratory factor analysis showed that three factors regarding attributes selection were extracted from all measurements with a KMO of 0.757 and a total cumulative variance of 67.885%, With regard to relationship quality, three factors were extracted with a total cumulative variance of 76.070% and a KMO score of 0.715. One factor for behavioral intention was extracted that accounted for a total cumulative variance of 66.254% and a KMO score of 0.771. All factors were significant to 0.000 and the correlation between variables was significant. Thus, based on the results, the main research hypothesis that identifies the relationships attributes selection between relationship quality and behavioral intention was partially adopted.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.627-631
• /
• 2006

The objective of this study was to evaluate the association of genetic differences in the bovine leptin gene and milk yield, reproduction, body condition score (BCS), and plasma glucose level in Iranian Holstein cows. In total, two hundred and thirty eight cows were used and genotyped for a restricted fragment length polymorphism at the leptin gene locus. Two genotypes, AA and AB, have been distinguished which have the frequencies of 0.89 and 0.11, respectively. The genotypes were distributed according to the Hardy - Weinberg equilibrium ($x^2$ = 0.733). During the first 12 wk of lactation, milk yield and composition, live weight, BCS and plasma glucose were measured in 50 cows. Data were analyzed based on a repeated measures ANOVA. During this period, milk yield and composition, live weight, BCS and plasma glucose level were similar among the genotypes. The first cumulative 60-d milk yield, 305-d milk yield, days to first breeding, days open and days from first breeding to conception using previous lactation records were also analyzed using Standard Least Square within mixed models. Fixed effects were year, season, parity and age at calving, and sire. For the reproductive traits the cumulative first 60-d milk yield was also added to the model. Animal was fitted as a random effect. A significant association was detected between the RFLP-AB genotype and 305-d milk yield (p<0.05). The first 60-d cumulative milk yield was similar for the two genotypes (p = 0.21) and tended to be higher in the heterozygous cows. The heterozygous genotypes at the above mentioned locus had a trend to better reproductive performance than the homozygous. The results demonstrate that the RFLP B-allele can yield a higher 305-d milk production with a trend to better reproductive performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.1
• /
• pp.86-91
• /
• 2012

An in vitro rumen batch culture study was completed to compare effects of common grasses, leguminous shrubs and non-leguminous shrubs used for livestock grazing in Australia and Ghana on $CH_4$ production and fermentation characteristics. Grass species included Andropodon gayanus, Brachiaria ruziziensis and Pennisetum purpureum. Leguminous shrub species included Cajanus cajan, Cratylia argentea, Gliricidia sepium, Leucaena leucocephala and Stylosanthes guianensis and non-leguminous shrub species included Annona senegalensis, Moringa oleifera, Securinega virosa and Vitellaria paradoxa. Leaves were harvested, dried at $55^{\circ}C$ and ground through a 1 mm screen. Serum bottles containing 500 mg of forage, modified McDougall's buffer and rumen fluid were incubated under anaerobic conditions at $39^{\circ}C$ for 24 h. Samples of each forage type were removed after 0, 2, 6, 12 and 24 h of incubation for determination of cumulative gas production. Methane production, ammonia concentration and proportions of VFA were measured at 24 h. Concentration of aNDF (g/kg DM) ranged from 671 to 713 (grasses), 377 to 590 (leguminous shrubs) and 288 to 517 (non-leguminous shrubs). After 24 h of in vitro incubation, cumulative gas, $CH_4$ production, ammonia concentration, proportion of propionate in VFA and IVDMD differed (p<0.05) within each forage type. B. ruziziensis and G. sepium produced the highest cumulative gas, IVDMD, total VFA, proportion of propionate in VFA and the lowest A:P ratios within their forage types. Consequently, these two species produced moderate $CH_4$ emissions without compromising digestion. Grazing of these two species may be a strategy to reduce $CH_4$ emissions however further assessment in in vivo trials and at different stages of maturity is recommended.