• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.163-169
• /
• 1997

Due to the increasing of the number of cars and bad road conditions, car accidens are increasing every you in Korea. When a person meets a car accident, it is necessary for him to analyze and determine whether applying insurance or not, because standard discount rate and special increasing rate change with accident types and the amount of accident expenditure. When we consider insurance rate that includes more then ten elements, we need a decision making, In this paper, S insurance company investigated previous car causers in 1988, 1989, 1990 to 1996 with 600,000 real data. We investigate probability density functions and cumulative distribution functions for each year using ARENA software. We can apply the results of this study to various accidents that occur under uncertainty in our life. I hope that this paper contribute to strengthening competitive power of companies and developing new insurance rate systems in future.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.973-974
• /
• 2008

As radar signal environments become denser and more complex, the capability of high-speed and accurate signal analysis is required for ES(Electronic warfare Support) system to identify individual radar signals at real-time. In this paper, we propose the new novel clustering algorithm of radar pulses to alleviate the load of signal analysis process and support reliable analysis. The proposed algorithm uses KDE(Kernel Density Estimation) and its CDF(Cumulative Distribution Function) to compose clusters considering the distribution characteristics of pulses. Simulation results show the good performance of the proposed clustering algorithm in clustering and classifying the emitters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.101-105
• /
• 1992

Machined graphite/epoxy composite surfaces were studied by using SEM(Scanning Electron Microscopy). surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and laminate composite surface. The surface roughness and profile are found to be highly dependent on the fiber layup direction and the measurement direction. Machined unidirectional and 0.deg. 45 .deg. 90 .deg. plies in laminate composite surface profiles are found to be Gaussian in the direction of machining. Since there exist bare fibers without matrix smearing in 0 .deg. ply, higher surface roughness values were found in this orientation. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters Ra without Dy (maximum Damage Depth) region and Dy are better descriptors of the machined laminate composite surface than commonly used roughness parameters Ra and Ra. The characteristics of surface profiles in laminate composite are well represented in CHD (Cumulative Height Distribution) plot and PPD (Percentage Probability Density) plot. Also, the power spectral density function is shown to be capable of identifying the wavelength distribution of the machining damage.

• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2004

Cryptomeria japonica plantation was monitored every year during 15 years from 1983 to 1997 for stem diameter and volume. The reciprocal equation, 1/Y = A + B/N, was applied to the relationship between cumulative volume Y and cumulative number N from the largest tree in the stand each year. The parameters A and B, which means respectively the reciprocal of an asymptotic value of total stand stem volume and the reciprocal of the maximum stem volume, are related by a power function. The power functional relationship between A and B derived a linear relationship of B-points ( $N_{B}$, $V_{B}$; $N_{B}$ = B/A, $Y_{B}$ = 1/2A) of each Y-N curve on log-log coordinates. The gradient of B-point line was so steep that the Y-N curve moved parallel upward year by year. The time trajectory of mean stem volume (W) and density ($\rho$) provided evidence in favor of the 3/2 power law of self-thinning, because the gradient of W - $\rho$ trajectory on log-log coordinates approximated to -3/2 at the final stage of stand development. On the basis of the results of Y-N curves and W - $\rho$ trajectory, the time trajectory of maximum stem volume $W_{max obs}$ and $\rho$ was derived theoretically. The gradient of $W_{max obs}$ - $\rho$ trajectory on log-log coordinates is calculated to be -0.6105 at the final stage. The gradient of $W_{max obs}$ - $\rho$ trajectory was steeper than that of W - $\rho$ trajectory at the early stage, while the former is gentler than the latter at the later stage.stage.e.age.e.

• Journal of the Korean Institute of Gas
• /
• v.10 no.1 s.30
• /
• pp.48-55
• /
• 2006

In order to establish the comprehensively, quantitatively predictable program to the fire and explosion accidents in the urban gas system, and to set up domestic criteria of societal risk, the collected urban gas accident data have been deeply analyzed. The Poisson probability distribution functions with t=5 for the database of the gas accidents in recent 11 year shows that 'careless work-explosion-pipeline' item has the lowest frequency, whereas 'joint loosening & erosion-release-pipeline' item has the highest frequency. And thus the proper counteractions must be carried out. The further works requires setting up successive database on the fire and explosion accidents systematically to obtain reliable analyses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.136-143
• /
• 2010

In this paper, we investigate decode-and-forward (DF) relaying systems with a direct link between the source and the destination node. The objective of this paper is to determine the better relaying strategy between 3-hop DF relaying and dual-hop DF relaying with the best relay selection. Assuming Rayleigh fading channels, we present closed-form outage probability of the 3-hop relaying and the dual-hop relaying, respectively, and compare the performances by numerical investigation. Numerical results show that if the channel is poor, the outage performance of the 3-hop relaying is better than the dual-hop relaying.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.153-155
• /
• 2011

In this study, an insulation panel system that has the most excellent economic feasibility in a long term LCC viewpoint in some analysis, which determine a proper insulation panel construction method for the out wall of structures, is analyzed. As a result, in the case of a deterministic LCC analysis, the initial investment cost represents about 80,000Won/㎡ for extrusion ceramic panels. Also, although the costs of maintenance, disassembling, and disposal show no large differences compared with other panel systems, metal panels indicate a bit higher than other panel systems about 1.5 times. In the probability density function that analyzes the variation of the probabilistic cost between panel systems and its economic feasibility, metal panels show the highest cost distribution and extrusion and stone panels represent low cost distributions. In the cumulative function distribution that composites probability density functions, the extrusion ceramic panel represents the most excellent economic feasibility and reliability and that is also the most superior subject among the subjects used in this study.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.320-325
• /
• 2011

This paper considers the effects of simultaneous correlated multipath fading and shadowing on the performances of a signal-to-interference ratio (SIR)-based dual-branch selection combining (SC) diversity receiver. This analysis includes the presence of cochannel interference. A generalized fading/shadowing channel model in an interference-limited correlated fading environment is modeled by generalized-K distribution. Closed-form expressions are obtained for probability density function and cumulative distribution function of the SC output SIR, as well as for the outage probability. Based on this, the influence of various fading and shadowing parameter values and the correlation level on the outage probability is examined.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1903-1909
• /
• 1989

In this paper, the mobile communication CH simulator is implemented in the baseband, using the Digital Signal Processor(TMS320C25), A/D and D/A converters. The Rayleigh CH is modeled by shaping the random noise source power spectrum. The statistical characteristics(Level Crossing Rate, Cumulative distribution Function, Probability Density Function) and the received fading signal's power's spectrum is observed when the doppler frequency is varied according to the variation of the vehicular velocity at the 222MHz band. And also the BER is measured when the baseband mobile CH simulator is applied to the GMSK(Gaussian Minimum Shift Keying` transmission rate: 16kbps, Bb T=0.25) modulator. The results shows the similar characteristics to be compared with the theoritically derived BER values of the discriminator type GMSK detection.

• International Journal of Reliability and Applications
• /
• v.18 no.2
• /
• pp.65-82
• /
• 2017

Abstract. Camilo Dagum proposed several variants of a new model for the size distribution of personal income in a series of papers in the 1970s. He traced the genesis of the Dagum distributions in applied economics and points out parallel developments in several branches of the applied statistics literature. The main aim of this paper is to define a bivariate Dagum distribution so that the marginals have Dagum distributions. It is observed that the joint probability density function and the joint cumulative distribution function can be expressed in closed forms. Several properties of this distribution such as marginals, conditional distributions and product moments have been discussed. The maximum likelihood estimates for the unknown parameters of this distribution and their approximate variance-covariance matrix have been obtained. Some simulations have been performed to see the performances of the MLEs. One data analysis has been performed for illustrative purpose.