• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.145-156
• /
• 1997

2성분계(CaO-, Y2O3-, MgO-ZrO2) 및 3성분계(MgO-ZrO2-Al2O3)ZrO2분말의 안정화제 종류, 첨가량 및 열처리온도 변화에 따른 ZrO2의 상전이를 X-선 회절과 Raman분광법으로 연구하였다. CaO-, 및 Y2O3-ZrO2계에서 CaO와 Y2O3의 첨가량이 각각 6~15mol% 및 3~15mol%로 증가에 따른 정방정상에서의 입방정상으로의 상전이를 X-선회절 pattern으로는 판별하기 어려웠으나, Raman spectra에서는 모든 Raman band가 저파수쪽으로 이동하고 band의 수 및 그 세기가 현저히 감소함을 관찰할 수 있었다. 이것은 정방정$\longrightarrow$입방정의 상전이가 발생한 것으로 ZrO2 격자내에서 Zr4+ 이온과 Ca2+ 혹은 Y3+이온의 치환에 의해 산소이온의 빈자리 생성으로 인한 구조적 불규칙성과 선택규칙(k=0)의 파괴에 기인한 것으로 해석된다. MgO의 경우에는 10mol%에서 단사정에서 입방정으로 상전이가 발생하였다. MgO-ZrO2-Al2O3계에서는 Al2O3의 첨가에 의해 입방정$\longrightarrow$단사정의 상전이가 발생하는데 이것은 MgO와 Al2O3의 반응에 의해 spinel(MgAl2O4)의 형성으로 인하여 MgO가 충분히 안정화제로서의 역할을 하지 못하기 때문으로 판단된다. 또한, 안정화제의 종류와 첨가량 변화에 따른 ZrO2의 상전이를 ZrO2의 격자상수값의 변화와 관련하여 설명할 수 있는데, 즉, 안정화제의 첨가량이 증가할수록 격자상수 a값은 증가하고 c값은 감소하여 10~13mol%사이에서는 c/a의 축비가 1에 근접하고, 따라서 정방정$\longrightarrow$입방정의 상전이가 진행됨을 알 수 있었다.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.243-250
• /
• 1987

9mol% 의 MgO로 $1650^{\circ}C$에서 4시간 고상반응과 동시에 소결시킨 부분안정화 지르코니아 소결체(9MZ-PSZ)를 소성후 냉각중 $1200^{\circ}C$~$1400^{\circ}C$의 온도범위에서 열처리하여 이의 열분해 반응, 열충격기등 및 기전력 특성에 대하여 조사하였다. 열충격시럼 전과 후의 강도, 열팽창률, X-선 회절분석에 의한 단사정사 함률과 상전이, 밀도 및 갈바닉 전위를 측정하였으며 SEm에 의한 미세구조를 관찰하였다. 입체부근의 미소화학분석은 $1350^{\circ}C$ 열처리 시편에 한하여 EDX 로 정량하였다. 9MZ-PSZ 시편의 열처리에 의하여 입방정상의 $ZrO^{2}$는 상기 온도범위에서는 준안정-정방정상의 $ZrO^{2}$와 MgO로 열분해되는데, 이때 생성된 준안정 정방정상은 열충격 시험후의 잔류강도를 응력유기상전이 효과에 의해 증가시킨다. 또한 MgO는 입계에 연속적으로 존재하는데 이런하 MgO의 연속상을 통한 열전도롤 인하여 PSZ의 열충격 저항이 크게 향상된다. 이때 PSZ의 열분해 속도와 단사정상 함량은 열처리 온도가 $1400^{\circ}C$에서 $1200^{\circ}C$로 감소됨에 따라 증가한다. 갈바닉전의 측정결과 이상의 열처리에 의하여도 양호한 기전력 특성을 갖는 지르코니아 고체전해질을 제조할 수 있다.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.385-395
• /
• 2021

PURPOSE. To characterize the microstructure of three yttria partially stabilized zirconia ceramics and to compare their hardness, indentation fracture resistance (IFR), biaxial flexural strength (BFS), and fatigue flexural strength. MATERIALS AND METHODS. Disc-shaped specimens were obtained from 3Y-TZP (Vita YZ HT), 4Y-PSZ (Vita YZ ST) and 5Y-PSZ (Vita YZ XT), following the ISO 6872/2015 guidelines for BFS testing (final dimensions of 12 mm in diameter, 0.7 and 1.2 ± 0.1 mm in thicknesses). Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed, and mechanical properties were assessed by Vickers hardness, IFR, quasi-static BFS and fatigue tests. RESULTS. All ceramics showed similar chemical compositions, but mainly differed in the amount of yttria, which was higher as the amount of cubic phase in the diffractogram (5Y-PSZ > 4Y-PSZ > 3Y-TZP). The 4Y- and 5Y-PSZ specimens showed surface defects under SEM, while 3Y-TZP exhibited greater grain uniformity on the surface. 5Y-PSZ and 3Y-TZP presented the highest hardness values, while 3Y-TZP was higher than 4Y- and 5Y-PSZ with regard to the IFR. The 5Y-PSZ specimen (0.7 and 1.2 mm) showed the worst mechanical performance (fatigue BFS and cycles until failure), while 3Y-TZP and 4Y-PSZ presented statistically similar values, higher than 5Y-PSZ for both thicknesses (0.7 and 1.2 mm). Moreover, 3Y-TZP showed the highest (1.2 mm group) and the lowest (0.7 mm group) degradation percentage, and 5Y-PSZ had higher strength degradation than 4Y-PSZ group. CONCLUSION. Despite the microstructural differences, 4Y-PSZ and 3Y-TZP had similar fatigue behavior regardless of thickness. 5Y-PSZ had the lowest mechanical performance.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.516-523
• /
• 2015

Nickel based oxygen transfer materials supported on two different YSZs were tested to evaluate their performance in methane chemical-looping reforming. The oxygen transfer materials of YSZs were selected with different amount of the doped yittrium in the $ZrO_2$ structure. The yittrium of 8 mol% stabilized the zirconia oxide to a cubic structure compare to the 3 mol% doping, which is known to be a good for oxygen transfer. Various nickel amounts (16wt.%, 32wt.%, 48wt.%) were loaded on the selected supports. The nickel amount of 32% shows the optimized catalyst structure with good physical properties and reducibility from the XRD, BET and H2-TPR analysis, especially when the support of 8YSZ was used. From the methane chemical-looping reforming, hydrogen was produced by methane decomposition catalyzed by Ni on both YSZs. Comparing two YSZ supports of 3YSZ and 8YSZ during the cycling tests, the catalyst with 8YSZ (Ni 32%) exhibits not only the higher methane conversion and hydrogen production but also a faster reaction rate reaching to the stable point.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.470-475
• /
• 2012

$La_{1-x}Sr_xMnO_3$(LSM,$0{\leq}x{\leq}0.5$) powders as the air electrode for solid oxide fuel cell were synthesized by a glycine-nitrate combustion process. The powders were then examined by X-ray diffraction(XRD) and scanning electron microscopy (SEM). The as-formed powders were composed of very fine ash particles linked together in chains. X-ray maps of the LSM powders milled for 1.5 h showed that the metallic elements are homogeneously distributed inside each grain and in the different grains. The powder XRD patterns of the LSM with x < 0.3 showed a rhombohedral phase; the phase changes to the cubic phase at higher compositions($x{\geq}0.3$) calcined in air at $1200^{\circ}C$ for 4 h. Also, the SEM micrographs showed that the average grain size decreases as Sr content increases. Composite air electrodes made of 50/50 vol% of the resulting LSM powders and yttria stabilized zirconia(YSZ) powders were prepared by colloidal deposition technique. The electrodes were studied by ac impedance spectroscopy in order to improve the performance of a solid oxide fuel cell(SOFC). Reproducible impedance spectra were confirmed using the improved cell, which consisted of LSM-YSZ/YSZ. The composite electrode of LSM and YSZ was found to yield a lower cathodic resistivity than that of the non-composite one. Also, the addition of YSZ to the $La_{1-x}Sr_xMnO_3$ ($0.1{\leq}x{\leq}0.2$) electrode led to a pronounced, large decrease in the cathodic resistivity of the LSM-YSZ composite electrodes.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.239-244
• /
• 1984

The effect of tetragonal $ZrO_2$ phase on the mechanical behavior in 7 mole% calcia partially stabilized zirconia has been studied. The $ZrO_2$ powder containg 7 mole% CaO prepared by Hot Petroleum Drying Method calcined at 80$0^{\circ}C$ for 1 hour was nearly 100% tetragonal but as the calcining temperature increased certain amount of monoclinic phase appeared. The sintered specimen at 1$700^{\circ}C$ for 5 hours was aged at 130$0^{\circ}C$ for 0, 24, 48, 72 hours. X-ray diffraction data showed that in the aged specimen monoclinic tetragonal and cubic phase coexisted. The Kc value of aged specimen for 48 hr was about 4.5MN/m3/2 much greater than unaged sample. But aged for 72 hr the KiC value was decreased. The increasing of toughness in PSZ is based on the Stress-Induced Phase Transformation that is metastable tetra-gonal $ZrO_2$ changes t stable monoclinic phase within the stress field of crack and the mechanical fracture energy absorption is occured But in this case due to certain amount of tetragonal phase transformed to monoclinic phase during cooling the microcrack effect by transformation also considered. Trerefore both Stress-Induced Phase Transformation and inclusion induced microcracking effect contrbute to the increase of fracture toughness of 7 mole% CaO-$ZrO_2$ containing monoclinic and tetragnola phase simulataneously.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.439-446
• /
• 2011

Yttria stabilized zirconia (YSZ) coating was formed on AA1050 Al alloys by aerosol deposition (AD), and its electrochemical corrosion properties were investigated in 3.5 wt% NaCl and 0.5M $H_2SO_4$ solutions. The crack-free, dense, and ~5 ${\mu}m$ thick YSZ coating was successfully obtained by AD. The as-deposited coating was composed of cubic-YSZ nanocrystallites of ~10 nm size. The potentiodynamic test indicated that the YSZ coated Al alloy had much lower corrosion current densities (2 nA/$cm^2$) by comparison to uncoated sample and exhibited a passive behavior in anodic branch. Particularly, a pitting breakdown potential could not be identified in $H_2SO_4$. EIS tests revealed that the impedance of YSZ coated sample was ${\sim}10^6{\Omega}cm^2$ in NaCl and ${\sim}10^7{\Omega}cm^2$ in $H_2SO_4$, which was about 3 or 4 orders of magnitude higher than that of uncoated sample. Consequently, the corrosion resistance of Al alloy had been significantly enhanced by the YSZ coating.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.510-515
• /
• 1994

플라즈마 화학 증착법으로 (100)p-type Si wafer위에 $Y_2O_3$-Stabilzed $ZrO_2$박막을 증착하였다. 반응 기체로는 zirconium triflouracethylacetonate[Zr(tfacac) $[Zr(tfacac)_4]$, tri(2.2.6.6 tetramethy1-3, 5-heptanate) yttrium $[Y(DPM)_3]$과 oxygen gas를 사용하였다. X-ray diffraction(XRD)과 fourier Particle induced x-ray emission(PIXE)을 통하여 $Y(DPM)_3$ bubbling temperature가 $160^{\circ}C, 165^{\circ}C, 170^{\circ}C$일때 $Y_2O_3$함량이 12.1mo1%, 20.4mol%, 31.6mol%임을 알 수 있었다. C-V측정에서 $Y(DPM)_3$ bubbling temperature가 증가함에 따라 flat band voltage가 더욱더 음의 방향으로 이동하였다.

• 한국의상디자인학회지
• /
• 제24권1호
• /
• pp.15-33
• /
• 2022

The purpose of this study was to categorize the decorative characteristics of the Rococo Age, which displays the most glamorous and elegant decorative beauty, in architecture, interior decorations, paintings, and patterns, and to analyze these characteristics and graft them onto art masks in a modern way. Piece I is a mixed media piece that based its motif on the ceilings and pulpits of the German Vis Pilgrimage Church, which is representative architecture of the Rococo Age. It was glamorously produced using gold and cubic zirconia. Piece II is also a mixed media piece that borrowed its motif from the exterior and gazebo of the Sanssouci Palace in Germany, another representative piece of architecture from the Rococo Age, and it was produced to clearly display the image of the Sanssouci Palace, using emerald and ivory. Piece III applies the furniture trends of the Rococo Age. Curves in S and C shapes, which can often be found in Chinese furniture, along with dark backgrounds, common in portrait paintings, were applied to give a sense of weight and dignity. Piece IV is an application of the fabric patterns of the Rococo Age. Continuous patterns of flowers and greenery stems were drawn on the mask to recreate the fabric patterns of the age. Piece V used the painting 'Swing' of the Rococo Age as its inspiration. Lace and ribbon decorations were used to emphasize feminine beauty and express the loveliness of the woman that appears in the painting. Piece VI borrows from the painting 'Madame de Pompadour' of the Rococo Age and the clothing worn by Pompadour. This piece grafted colors and themes through the painting and expressed a fusion of the dresses of Pompadour and lace that is clearly displayed in the architecture, paintings, clothing, interior decorations, and patterns of the Rococo Age, along with the rocaille (asymmetrically shaped decorations that resemble clams), flowers, leaves, stems, and Chinoiserie styles. These motifs clearly display the decorative characteristics of the age and these were grafted them onto art masks, confirming that it is possible to create new designs.

• 한국광물학회지
• /
• 제13권3호
• /
• pp.164-170
• /
• 2000

중성자 단결정 및 분말회절실험을 이용하여 이트리아를 첨가한 저코니아 (yttria-stabilized airconia, Zr0.73Y0.27O1.87) 결정의 구조 분석을 수행하였다 시료는 입방정계로써, 공간군 Fm/equation omitted/ a=5.155(2)$\AA$, V=136.99(5), Z=4로 결정화되었고, 중성자 단결정 회절실험의 결과로 얻어진 70개의 브라그 회절반점을 이용한 최종신뢰도 R(F) 및 $\omega$R(I) 값은 각각 0.0576, 0.1057 이었다. Zr과 Y 원자 들은 이상적인 형석 (CaF2) 구조의 cation 위치에 불규칙하게 배열되어 있었으며, 산소 원자들의 대부분 (95%)은 (1/4,1/4,1/4) 위치에서 <110> 방향으로 $\Delta$/a~0.033의 크기만큼 이동하였고, 나머지 산소 원자들은 <100> 방향으로 $\Delta$/a~0.033의 변위가 존재하였다. Rietveld 분석법을 이용한 중성자 분말회절실험의 결과는 단결정 회절실험에서 보여주었던 결정학적 정보와 모든 면에서 잘 일치하고 있었으며, 정방정계의 구조에서 기인되는 몇 개의 불순상의 존재가 최종 분석된 분말 회절상에서 확인되었다.